I really need to get this sorted, weird text mess
Sorry to bang on about this.
I have a number of iWeb websites such as www.sbls.co.uk
If you launch a browser and look at the pages they are fine. If however you change the text size, by just one point in the browser, the titles on some of the iweb pages goes huge, like 100points and renders that page useless. Decreasing the text size does not help you have to quit the browser and try again.
If you goto the page and then adjust font size in the browser it works just fine. Its if you change font size before going to the website. Its repeatable.
it does it in both Safari and Firefox for me and is likely a bug in iWeb. Does anyone else experience this with their web pages? I am at a loss what to do.
Here is an example of it as it should look:
http://homepage.mac.com/garethirwin/.Pictures/good.jpg
And this is how it looks if any adjusments are made to font sizes in a broswer
http://homepage.mac.com/garethirwin/.Pictures/bad.jpg
Message was edited by: Gary i
Pablos1966 wrote:
Surely the current ID and Password would work . Anyway I will see how I get on with the Device Password.
No. If you failed to turn off Find my iPhone BEFORE you upgraded to iOS 7, you will need the original Apple ID and password. If you upgraded to iOS 7 you will need this info; there is no way around this. If it is the device passcode you will need to restore your iPhone in order to reset that, which in the end will require your Apple ID and password in order to activate the phone once it is restored.
Why don't you have the original Apple ID? Where did you get the phone?
Similar Messages
-
Just upgraded IOS to V7 and iphone is asking for a password and the online password will not work. I really need to get this sorted as I am away and need to get the phone working.
Pablos1966 wrote:
Surely the current ID and Password would work . Anyway I will see how I get on with the Device Password.
No. If you failed to turn off Find my iPhone BEFORE you upgraded to iOS 7, you will need the original Apple ID and password. If you upgraded to iOS 7 you will need this info; there is no way around this. If it is the device passcode you will need to restore your iPhone in order to reset that, which in the end will require your Apple ID and password in order to activate the phone once it is restored.
Why don't you have the original Apple ID? Where did you get the phone? -
I really need to get this fixed an get his back up restored to his phone. thanks
I backed up my sons Iphone 4 and tried to get it to Icloud with no luck, I figured it backed up to his itunes, I connected to itunes and logged him in under his account. I thought it was his back up but it was mine . How can I get his 2.4 gig back that is on his phone to restore his phone. can I do it right from the phone . I really need to get this fixed an get his back up restored to his phone. thanks
ON both devices go to settings - message - send&receive - uncheck or remove the appl id.
In the same settings - start a new conversation - remove or uncheck the apple id. -
Iphone 5 poor battery since iOS 8 updated Apple need to get this sorted as if ur on Internet on fone for 20 mins or so battery goes down very quickly and no it's not my battery I have 3 iphone 5 doing same Apple take note there's millions of people that need there done not to fully charge it then it goes flat within a hour and thats with a new battery fitted aswell
brianbrew wrote:
Apple take note there's millions of people that need there done not to fully charge it then it goes flat within a hour and thats with a new battery fitted aswell
Take note that in the TOS that you agreed to when you joined the community that this is a user to user forum, and Apple does not participate. If you want Apple to take note of something, then you need to use the feedback page HERE, and click on the appropriate link. -
I have recently backed up my Iphone 4. However now it will not restore as it claims I have not enough space on the iphone. I am in a major hurry to get this up and running by tonight as need it for work ?
Hey annefrombeach,
Thanks for the question. It sounds like you are unable to restore your backup due to an error message regarding not enough free space. The following resource outlines troubleshooting steps for this specific error message:
iOS: If you can't back up or restore from a backup in iTunes - Apple Support
http://support.apple.com/en-us/ts2529
Thanks,
Matt M. -
I need help
Thanks for a reply
The cable that I'm using came with my 5th gen nano. The 6th gen Ipod shows that it's connected but the computer doesn't see it, so I don't think that it's the cable.
I did try this before when looking at the troubleshooting guide and nothing happens. It just resets and then the Ipod screen tells me that it's connected to the computer. It still is unseen by Itunes and no where to be found in my computer.
I don't have another computer to plug it into at the moment but I may be able to visit a friend that owns a decent PC in a few days. If that doesn't work out I will be getting a new lap top in a week and I'm hoping that it will work on that, but it won't be a Mac. So, let's say it works when I plug it into one of these computers, should I reset my Ipod from there or is there something else I should do? -
Hi all,
I'm trying to compile a population genetic software program onto my Mac Lion. It was originally compiled to Tiger and worked beautifully. But now I'm getting an error 'library not found for -lglut', and now I'm trying to figure out how to download the library. I've installed the command line code for Xcode, and am thinking I possibly missed installing the libraries. I could be very wrong here... all I know is that I'm no longer near the people I would ask to help me with this so I'm asking you! Thanks in advance for any help! I guess my questions are: 1) where can I download the glut (potentially OpenGL) libraries (if I don't have them already)? And 2) once downloaded, how do I install it so the makefile will compile my program (in terminal, not Xcode)? Cheers,
CCertain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you! -
Iphoto book will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process?
Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the fix below:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
After each run thru the repair process see if you can create a PDF file of the book as described in this Apple Document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If you can try ordering the book. If you can't finish trying all of the otpions and then boot into Safe mode and try there.
OT -
Please help me!!!! I really need to get this video back!!
I created a movie in imovie. there was also a BLANK movie in imovie (it had no videos in it yet) and that movie got renamed as the other movie that i created before. now, wherever i look for the old video in my computer, the blank one comes up in that name and none of them are the old video!!!!! is there any way that i can get the old video back??? or is it gone for good!!!! PLEASE HELP!!!!!
ITUNES SUPPORT BILLINGS etc
http://www.apple.com/emea/support/itunes/contact.html or https://expresslane.apple.com/Issues.action -
Any help would be really appreciated!
I doubt that's it. I've had it since 08 and Pages, Keynote and Numbers were all there and in full working order for years. I did upgrade my OS. But that was a few months back and I've used these applications since then. I don't know why I would have to repurchse iWork after 3 years.
-
I have done everything. I don't really know what else to do.
It's now not letting me download free apps now
-
My mac is only a year old. I am still under warranty but don't want to have to go to the store. I know it has something to do with not connecting to my hard drive and I want to make it clear that IT HAS NOT BEEN DROPED,BANGED OR DAMAGED IN ANY WAY!!
Here is what I have tried so far:
For safe start The loading bar shows up but then doesn't load. After a few seconds it disappears and the wheel continues to spin.
I have tried PRAM but it doesn't help at all.
The only way I can get it off the start off page is to either go to fsck or Mac OS utilites.
Fsck comes up as an error message for me when I put in fsck -FY. /sbin/fsck -FY also doesn't work.
Mac OS utilities really also doesn't much. When I try to back up my hard drive it recognizes the external drive but then has no where to put it to??? So then I tried reinstalling the lion software part bit it won't allow me because for some reason it is locked. So I also try to verify and repair my drive. An error message comes up so I know there is something wrong. But not what to do about it. So now I am here on the Internet.
I Really need to get this fixed!!! PLEASE SOMEONE PROVIDE ME WITH AN ANSWER TO HELP FIX MY PROBLEMS.My mac is only a year old. I am still under warranty but don't want to have to go to the store. I know it has something to do with not connecting to my hard drive and I want to make it clear that IT HAS NOT BEEN DROPED,BANGED OR DAMAGED IN ANY WAY!!
Here is what I have tried so far:
For safe start The loading bar shows up but then doesn't load. After a few seconds it disappears and the wheel continues to spin.
I have tried PRAM but it doesn't help at all.
The only way I can get it off the start off page is to either go to fsck or Mac OS utilites.
Fsck comes up as an error message for me when I put in fsck -FY. /sbin/fsck -FY also doesn't work.
Mac OS utilities really also doesn't much. When I try to back up my hard drive it recognizes the external drive but then has no where to put it to??? So then I tried reinstalling the lion software part bit it won't allow me because for some reason it is locked. So I also try to verify and repair my drive. An error message comes up so I know there is something wrong. But not what to do about it. So now I am here on the Internet.
I Really need to get this fixed!!! PLEASE SOMEONE PROVIDE ME WITH AN ANSWER TO HELP FIX MY PROBLEMS. -
I've changed my apple id password, however icloud still only accepting my old password. (though to sign in here, for example, it only accepted my new one). My Mac was stolen and I really wanted icloud to be safe! How do I get this sorted?
Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account") -
Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
It think it gives this error message when i reach 24% everytime during export.
So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
Taphabitboom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
is there any way of preemptively avoiding it in future projects?
thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?
Maybe you are looking for
-
Where is the home button on ipad2 when asked to double click?
Where is the home button, when asked to double click. I'm trying to lock my screen in landscape mode and to stop it from rotating. Please advise....thank you...
-
CK11N User exit for valuation strategy sequence Price Purchase info records
Hi, When ck11n is executed for a particular material whose purchase order is created then only price from purchase info records is considered. As the sub strategy selected is purchase order price via condition table. Requirement: CK11N should conside
-
FormatDate function returning #MULTIVALUE error
I need to display the raw date returned by a Universe Element in DD-MMM-YYYY format into a cell positioned in the Page Header. So used the below formula, which is returning "#MULTIVALUE" error to the cell. =FormatDate([Bank Business Date]; "dd-MMM-yy
-
Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!
My device is Iphone 5 64gb IOS 8. I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work. 1. How can i fix it? 2. Or how to rollback to IOS 7+ ? 3. Should i come to app sto
-
Hi, How to change the service master short text? for exmple italian to english Thanks, senthil S