I really need to know
how many songs or gb's can the i tunes hold. And how do u set the ipod updater for manualy.
the itunes can hold as much ...depending on your computers harddrive. Adn to set the syncing to manual.Connect your ipod then go to itunes preferences and within the music field there should be a selection to manage your music manually.
GFF
Similar Messages
-
so i droped my mom's ipad on accedent while walking inside helping carry bags inside... and at fist no one really thought anything of it but we got inside and my stepdad went to check something on it and was like um... something wrong and i guess the fall put it into shock or something but we held down the 2 buttons and it light up but it was black and just with the back light on. And it still wont work so im not sure what to do... I know where the slide to turn it on is so i did that and it made the click noise to signal it was on and i pushed where an app would be and it went to it and made the music to the app... so it works but for some reason the screen is being all stupid... I really need to know if there is a way to fix the screen because if theres not im in a ton of trouble... please help!!!!
I doubt there is you dropped it and broken the screen
try holding the top button and the round button at bottom of screen
hold both until maybe an Apple logo appears if nothing after 20 secs
the iPad is toast
It can be exchanged at an apple store for around $249 to $219 depending on model
Apple do not do repairs
I would own up now before it gets more complicated -
I do not know how to get the music that I buy on itunes, on my mac, onto an ipod. I have already authorized my computer and "downloaded" my music, but that did not do anything, or provid the results that I was expecting, at least. Please, I really need to know how to do this on my own but I do not know what to do.Thank you in advance to anyone that is answering this question that I know most everyone but me knows how to accomplish. thanks!!!
In iTunes go to the Help menu in the upper menu bar. Then click on iTunes Help. Then on Sync your iPod, iPhone or iPad and follow the instructions.
-
I just really need to know... After desigining my UX, how do I go about adding the image into ADOBE FLASH BUILDER to script on top of it?
Any and all advice is welcome.Do you have different versions of the graphic novel pages, or is there just one version of the page? If there is one version, can you crop into the page without losing anything important?
I would guess that there is one version, and that cropping into the page will lose something important. If that's the case, here's how I would handle it:
Make a stage that is 14:9. The size doesn't matter, but 1400x900 could be a good starting point.
Put down a background texture that fits well with the look of the other images. Make that fill the 1400x900 stage.
Place your page graphics so that they are within the center 1200x788 area of the stage.
Set the stage scalemode to "noBorder".
You now have a layout that will work on all devices, as narrow as iPad, and as wide as iPhone 5. All without any code. On the widest devices you'll see a bit of your background pattern to the left and right of the page graphic. On the narrowest devices you'll see a bit of background pattern above and below the page graphic. But you won't lose sight of anything important. -
Dear Reader
I have forgotten the answers to my security-questions. So it says that i will get an e-mail to reset my questions, but i have not gotten an e-mail?
So i tried it again (after a month) and it still doesen't work. I really need to know what's wrong :/
Thank You for helping meAlternatives for Help Resetting Security Questions and Rescue Mail
1. Apple ID- All about Apple ID security questions.
2. Rescue email address and how to reset Apple ID security questions
3. Apple ID- Contacting Apple for help with Apple ID account security.
4. Fill out and submit this form. Select the topic, Account Security.
5. Call Apple Customer Service: Contacting Apple for support in your
country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID -
Hi.i really need to know why some iphone 5s lose wi-fi or bluetooth comminucations after a while?!? i just charged it with my iphone 4's adapter,it can be the reason?!?!?!?! i dont think so....
It would help to have more details about when your phone loses wi-fi or bluetooth.
When an iPhone locks itself it turns Wi-fi off. I haven't had any problems with bluetooth turning off.
You might try restarting the phone. Double tap the home button to open the multitasking drawer, tap and hold on any icon in the drawer until the icons start to jiggle, tap the X that appears on the upper corner of each icon to shut them all down. Press the Home button to close the drawer. Then hold the sleep/wake button down and wait for the Slide to Power Off slider appears. Slide it and wait for the phone to shut down. Wait a few seconds and then press and hold the sleep/wake button again until the Apple logo appears and the phone restarts.
You can also reset your network settings, go to Settings => General => Reset Network Settings. You will have to reconnect and enter passwords for any wi-fi networks that you normally connect to after you do this.
Let us know if this doesn't help. -
Dumb question, but I really need to know.
Hi, I'm a newbie, so I need to know how to copy and paste cuz I've tried and nothing. I know that if I select a text or anything, I can grab it and put it wherever I want. But, that's not what I'm asking. Thank you all.
Once upon a time there were some nice tutorials that showed how to do the simple stuff. For copy and paste, use the Edit menu, up there in the Menu Bar. Or better, learn the keyboard short cuts. The little "four leaf clover" is the key with the Apple on it. It's also called the command key. Hold it down and use the keys right above it. The Z is "undo" great for stupid errors, as long as you didn't compound the error by doing too many stupid things in a row. X is for "cut" a lot like "copy" except it disappears until you paste it. C is for "copy" and V is for "paste."
MacBook 2GHz Black Mac OS X (10.4.6) -
Dynamic Routing Protocols - what do I really need to know?
Ok, ridiculously broad question I know but....what I'm trying to figure out is, let's say I'm in a large coproration and I have multiple field sites in different areas of the country so the network setup may be somewhat complex but when it comes to setting up the dynamic routing...is it as simple as let's say, configuring a router to use BGP for whatever portion you designate then just letting it be? is it somewhat challenging to initally configure dynamic routing protocols (i.e. how often have you found yourselves worrying about admin distance, areas (I don't even know what an "area" is yet either so if anyone could explain that I would appreciate it), etc..
So in short, are dynamic routing protocols "Set it and forget it" or do they require a ton of planning to setup? I'm familliar with the differences between them (i.e. OSPF, RIP, EIGRP,etc..) and the differences in link state and distance vector but I just wanted to ask about the setup of the protocols themselves.
Thanks!!You can exchange routes between protocols with redistribution.
The problem with the question is, as you say, it is too broad to really answer properly.
All routing protocols have different considerations so what you might do for EIGRP you may not do with OSPF and BGP is different altogether.
As a general answer if you are enabling it across a WAN all take a certain amout of planning and design and they all rely heavily on what you have done with your IP addressing in terms of summarisation etc.
The actual configurations to get a basic setup running are relatively simple, certainly for IGPs, but as your network grows you may find the configurations becoming more complex
BGP is a very different in that there are many different commands you can use to influence the path traffic takes but even here to setup a very basic BGP peering only requires a few commands.
But no routing protocol in a large environment should just be configured with no thought as to how it is going to work, traffic paths, number of routes etc.
You can do it but you may well find as your network grows you will end up having to revisit the whole thing because it is not working as you intended.
Like I say it's too large a question to really answer because each routing protocol is different and may or may not meet the requirements of the network.
If there are more specific questions then please feel free to ask.
Jon -
Need to know when text has finished loading
The following code loades text into a textfield the problem I'm having is the routine at the bottom runs before the text loads and the scrollbar disappears even when there's enough text to overflow the textfield. How would I make sure the text has finished loading before running the code that enables/disables the scrollbar?
mainText.htmlText = main[1];
textFieldLength = mainText.text.length;
if(mainText.length > textFieldLength){
mainScroll._visible = true;
}else{
mainScroll._visible = false;I messed up the example. All I really need to know is how can I determin when a dynamically textfield overflows.
-
Nokia 5233 Storage Question. You need to know this...
Hi, I'm not new to Discussions. PLEASE NOTE BEFORE READING THIS THREAD: I've digged EVERYwhere you can think of, so please have in mind that I come here because I really need to know this, I don't want to double-post anything or start a spam war or something. Thank you.
I was facing problems with my device, Nokia 5233. Sometimes the phone asks for too much time to do a simple task, and I have tried to defragment the memory card to see if it helps, but in the end it made no difference at all.
After that, I was recording a video and it went just fine. The problem happened later on, when I decided to view the video and it was lagging the image. I mean, the image was freezing sometimes but the audio was OK. I recorded another video after that and it had the same symptoms. NOTE: THE MEMORY CARD WAS WITH 1GB+ OF STORAGE REMAINING AVAILABLE TO BE USED.
This is about the stock memory card that comes with the cellphone, 2GB storage capacity, Micro SD card.
After I was told that this is a symptom of the memory card, I wonder if this is supposed to happen with the card that comes with the cellphone. I was **bleep** because I REALLY f***ing need those videos and this turned out to be a real nightmare because when I tried to back up my data using Nokia's software, I ended up with a corrupted file, it was supposed to be a BACKUP and the software just MOVED my SMS messages from the cellphone to my computer and I now can't move it back to the cellphone. But here, my deal is the memory, I changed it to another, higher capacity card, a Kingston Micro SDHC 4GB memory card. And still, I'm facing another issue:
I want to know what is the REAL extended memory capacity for Nokia 5233
I ask this because after googling about it for a few hours, I've found so many different opinions...First a guy said it's best not to upgrade the amount of memory at all, because of my device's limitation, second I read somewhere else I can upgrade the amount of memory up to 8GB and the phone "will still recognize it" and then just when I thought I was done with it, I have talked to Nokia Care on Twitter about it and they said I can be facing 'compatibility issue' with it.
According to his statement, "Unsupported memory cards may just work for small sizes of data, but might give issues wt bigger amounts, depending on the mmc".
That explains the issue with my cellphone's default video recorder/player. But then, again, Is that supposed to happen with a stock memory card?! I guess it's NOT, is it?
AND THEN, AGAIN, NOTE: THE MEMORY CARD WAS WITH 1GB+ OF STORAGE REMAINING AVAILABLE TO BE USED.
So, AFTER recording a 71MB video file, I was viewing it again, kinda hoping it was happening again because this time, it is a 4GB of memory.
I now decided to dig a little bit using Wikipedia, and then I found what I was afraid of:
"Devices that use SD cards identify the card by requesting a 128-bit identification string from the card. For standard-capacity SD cards, 12 of the bits are used to identify the number of memory clusters (ranging from 1 to 4,096) and 3 of the bits are used to identify the number of blocks per cluster (which decode to 4, 8, 16, 32, 64, 128, 256, or 512 blocks per cluster).
In older 1.x implementations the standard capacity block was exactly 512 bytes. This gives 4,096 × 512 × 512 = 1 gigabyte of storage memory. A later revision of the 1.x standard allowed a 4-bit field to indicate 1,024 or 2,048 bytes per block instead, theoretically yielding up to 4 gigabytes of memory storage. However the specification specifies 2 gigabytes as the maximum capacity.
Host devices designed before this change may incorrectly identify such cards, usually by misidentifying a card with less capacity than is the case by assuming 512 bytes per block rather than 1,024 or 2,048.
For the new SDHC (2.0) implementation, 32 bits of the identification string are used to indicate the memory size in increments of 512 bytes. The SDCA currently allows only 26 of the 32 bits to be used, giving a maximum size of 32 GB. All SD cards with a capacity larger than 4 GB must use the 2.0 implementation at minimum. Two bits that were formerly reserved and fixed at 0, now called the "CSD Structure", are being used for identifying the type of card, 0 is standard capacity; 1 is high (SDHC) and extended (SDXC) capacity; 2 and 3 are reserved. Older host devices are not aware of this new field thus cannot correctly identify SDHC or SDXC cards."
Source: http://en.wikipedia.org/wiki/Micro_sd_hc
So in other words, it can be that my device does not recognize my Kingston SDHC 4GB Micro DS Card correctly. Oh I mean the STOCK, 2GB Micro SD card. And POSSIBLY my Kingston SDHC card.
Is that correct?
What is the storage limitation for Nokia 5233?
Please answer this guys, I hope we can share the knowledge to anyone else who's planning to upgrade the memory for their Symbian-based smartphones.I don't mean the card class, I just meant the card type. Nokia is SUPPOSED to work out with majority of the cards out there, specially Symbian devices, so you can take the card off of your previous Symbian-based cellphone and then USE IT on another Symbian-based device, regardless if it is SD or SDHC.
Look, I just want to know these:
What is the storage limitation for Nokia 5233?
Is Nokia 5233 supposed to work with SDHC or not?
Simple as that.
Answers? -
I really need to know my security questions and I can't remember them! It won't let me purchase anything on iTunes. I need to get some songs because I am DJing the school dance but I have no way to buy any more! Please help.
Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in that article.
If you're desperate and can't wait for Apple to answer, create a new Apple ID.
(88251) -
I have a form to upload pictures, create a thumbnail, and put
them in folders. I really need to know how to put the links in a
database with php so I can display them on a page with the other
fields! PLEASE HELP!!stone_cutter wrote:
ok, if i was the computer, i would first, find the first occurence of the letter "V" in the word,Okay, good. How would you do that? You did look at the docs others pointed you to, right?
and then include all the subsequent characters.Okay, good. How would you do that? You did look at the docs others pointed you to, right?
I know what to do, i just don't know the codes for them.The idea is that you figure out "the codes." This generally means taking a guess at an approach that you think will work for one of the steps, writing some code, testing it, seeing if it produces the output you expect, figuring out why it didn't, changing it, repeating until you get it right, moving on to the same process with the next very small piece, and so on, until each piece works by itself, then putting the pieces together, and testing and tweaking until it works.
I know the code is gonna start with m = p.substring Why?
Why substring?
Why immediately m = ?
You don't think there will be any intermediate steps?
What you're doing here, rather than following the process I describe above, is grabbing a handful of buzzwords that you think apply, slapping them together, then throwing your hands in the air and crying, "I don't get it."
Where are the String API's? Can someone give me the link to them?I think they already did, more than once.
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/String.html -
Really need Help! - Java Video Streaming
Hi,
I bought a 'Creative' web-cam today and I want to be able to display real-time video in a Java applet. Could someone please help me to do this.
What classes do I need to capture the video, and use a server to either broadcast or stream the video to a client( applet ).
I have JMF 1.2.1 installed with jdk1.3.1
I'm kindof new to Java and really need to know where to start.
FYou should use JMF 2.0 or above version because they provide capturing ability.And also see the page. http://java.sun.com/products/java-media/jmf/2.1.1/solutions/
I think you will find some useful material on this page. -
I have my landline diverting to my iPhone. However, it does not distinguish whether the call has come from my diverted landline number. My old Nokia many years ago used to show an arrow symbol when it was a call thats source was diverted. I really need to know when a call has come from my landline so I can greet the caller in the appropriate way and also so I can be sufficiently short as I am getting charged for the call from my BT landline to my mobile.
That is not a feature that's available on the iPhone. Sorry.
-
I really need a good help - Applets
Well, i4m posting again, because i4ve got no answers, and i really need to run an applet.
My environment is an NT Server with the database (8.0.5.1) and OAS (4.0.8) and i4m trying to run an applet in another NT machine (the same where i have JDev 3.0 installed).
I don4t know if i4ve set all the needed to run an simple applet with database access, so i really need to know, step-by-step, what4s to do.
My applet don4t run and in the java console i4ve read some errors, posted below :
in IE 5.0 ->
java.lang.NoClassDefFoundError: oracle/dacf/dataset/AppModuleInfo
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at sun.applet.AppletPanel.createApplet(AppletPanel.java:508)
at sun.plugin.AppletViewer.createApplet(AppletViewer.java:814)
at sun.applet.AppletPanel.runLoader(AppletPanel.java:444)
at sun.applet.AppletPanel.run(AppletPanel.java:282)
at java.lang.Thread.run(Thread.java:479)
in Netscape 4.7 ->
load: class package10.Applet1.class not found.
java.lang.ClassNotFoundException: java.io.FileNotFoundException: \Brasil\C\Web\Alessandro\package10\Applet1\class.class (The system cannot find the path specified)
I4m trying real hard to run an applet and i4m becoming desperated !!! I know and hope that4s only something real easy was forgotten.
Can u help me ? Thanks !
nullOk, i4ve put my bussines.jar (the file where my Bussiness Components are) in the java_ARCHIVE tag and now the error changed :
load: class package10.Applet1.class not found.
java.lang.ClassNotFoundException: java.net.ConnectException: Connection refused: no further information
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:125)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:112)
at java.net.Socket.<init>(Socket.java:269)
at java.net.Socket.<init>(Socket.java:98)
at sun.net.NetworkClient.doConnect(NetworkClient.java:54)
at sun.net.NetworkClient.openServer(NetworkClient.java:42)
at sun.net.ftp.FtpClient.openServer(FtpClient.java:271)
at sun.net.ftp.FtpClient.<init>(FtpClient.java:385)
at sun.net.www.protocol.ftp.FtpURLConnection.connect(FtpURLConnection.java:82)
at sun.net.www.protocol.ftp.FtpURLConnection.getInputStream(FtpURLConnection.java:101)
at sun.applet.AppletClassLoader.getBytes(AppletClassLoader.java:228)
at sun.applet.AppletClassLoader.access$1(AppletClassLoader.java:218)
at sun.applet.AppletClassLoader$1.run(AppletClassLoader.java:141)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:138)
at sun.plugin.security.PluginClassLoader.findClass(PluginClassLoader.java:198)
at java.lang.ClassLoader.loadClass(ClassLoader.java:290)
at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:112)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:377)
at sun.applet.AppletPanel.createApplet(AppletPanel.java:508)
at sun.plugin.AppletViewer.createApplet(AppletViewer.java:814)
at sun.applet.AppletPanel.runLoader(AppletPanel.java:444)
at sun.applet.AppletPanel.run(AppletPanel.java:282)
at java.lang.Thread.run(Thread.java:479)
What4s wrong now ? My html and jar files are all in the same directory on the Web Server.
Can u help ?
Thanks !
Maybe you are looking for
-
HP Officejet Pro K5400 will not turn on.
The HP OP K5400 printer was operating for about 3 months. Recently the printer will not turn on. The power cord assembly was checked via meter and green power light while unplugged from printer. The power cord assembly is good. When the power cord is
-
Late 2013 iMac kernel panics and logging me out
I have already followed up with Apple Support so I have a case open for this, but in case the hive mind here was ahead of the problem I figured I would post the issue here too. I have a 2 day old iMac (1TB Flash, 32GB RAM - not 3rd party, 10.9.1) tha
-
Troubling Managed server (unable to start)
Hi I use WebLogic Server Version: 10.3.5.0, I want to setup both my ADMINISTRATION SERVER and MANAGED SERVER as windows service so as to start automatically when the system is switched on.... After configuring the scripts and installing them, only th
-
The error message is: unreported exception son; must be caught or declared to be thrown The code: class father extends Exception{ public String toString() return "father"; class son extends father public String toString()
-
I Have an iPad 2 the screen has gone blank, I have held both home and off button but nothing working the screens still blank. I have also reset my iPad via iTunes but now the screen is blank but it's flashes white and you can vaguely see hello, hallo