I receive an error 500 internal servo error
When I try to look up something and go on line, i receive an error message "500 internal server error"
You can contact MAS Customer Support here.
http://www.apple.com/support/mac/app-store/contact.html?form=account
Similar Messages
-
hi,
im configured the as2 partner setup as per this http://msdn.microsoft.com/en-us/library/bb246129(BTS.20).aspx.
but when im process file , then file try hit partner url goes dyhradated state,then failed. then i got below error.
The remote server returned an error: (500) Internal Server Error.
please any help..
Thanks500 server error could be due to anyone of the following reasons:
Party configuration is wrong. Party properties/configurations have to be discussed upfront with the source/destination system and have to be in-line with
them.
Certificates have to be deployed in correct folders based on certificate types like private/public/signed etc.
Firewall (or network components) has to be opened accordingly for parties(systems) to interact. This change has to be done at the both the levels, source and destination.
If you receive it through HTTPReceive.dll (may uses this for AS2), you have to check its configurations.
Also 500 error, could occur even if your BizTalk artifacts has not been configured/deployed/enabled properly.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Seeing this error when retrieving data from a SharePoint list. I have full access to the list. Any help would be appreciated.
DataSource.Error: SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
Details:
https://xyz/_vti_bin/ListData.svc/ListName
I think I figured out how to use Fiddler. Here's the information I captured-
This is a Tunnel. Status: OPEN, Raw Bytes Out: 3,797; In: 7,604
The selected session is a HTTP CONNECT Tunnel. This tunnel enables a client to send raw traffic (e.g. HTTPS-encrypted streams or WebSocket messages) through a HTTP Proxy Server (like Fiddler).
To enable Fiddler's HTTPS-decryption feature and view decrypted traffic, click Tools > Fiddler Options > HTTPS.
Request Count: 1
Bytes Sent: 107 (headers:107; body:0)
Bytes Received: 107 (headers:107; body:0)
Tunnel Sent: 3,797
Tunnel Received: 7,604
ACTUAL PERFORMANCE
ClientConnected: 11:06:11.389
ClientBeginRequest: 11:06:11.395
GotRequestHeaders: 11:06:11.395
ClientDoneRequest: 11:06:11.395
Determine Gateway: 0ms
DNS Lookup: 176ms
TCP/IP Connect: 77ms
HTTPS Handshake: 0ms
ServerConnected: 11:06:11.649
FiddlerBeginRequest: 11:06:11.649
ServerGotRequest: 11:06:11.649
ServerBeginResponse: 00:00:00.000
GotResponseHeaders: 00:00:00.000
ServerDoneResponse: 00:00:00.000
ClientBeginResponse: 11:06:11.649
ClientDoneResponse: 11:06:11.649
Overall Elapsed: 0:00:00.254
-= Fiddler Event Log =-
See http://fiddler2.com/r/?FiddlerLog for details.
10:33:33:8092 Fiddler Running...
10:33:33:8118 Fiddler.Network.AutoProxy> AutoProxy Detection failed.
10:33:33:8118 AutoProxy failed. Disabling for this network.
10:33:33:8118 Windows 8+ AppContainer isolation feature detected.
11:01:21:4125 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4145 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4185 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4258 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4268 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4298 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4398 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4398 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4518 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4518 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4528 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4828 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5789 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5820 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5879 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6179 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6530 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6924 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance -
I am *almost* all the way through provisioning my on premise SP 2013 farm for SharePoint 2013 Workflows. Workflow manager is installed alongside Service Bus. Workflow Manager client is installed on the SP servers. I built a new simple list-based
workflow in SP Designer 2013, saved it, and published it without any errors. However, when I go back to the list in my portal and try to run the workflow, I get the "Sorry, something went wrong" page, and the logs say this:
05/15/2013 12:41:05.07 w3wp.exe (0x071C) 0x085C SharePoint Foundation
Runtime tkau Unexpected System.Net.WebException: The remote server returned an error: (500) Internal Server
Error. at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result) at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(IAsyncResult result) at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest
request, T content) 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08 w3wp.exe (0x071C) 0x085C SharePoint Foundation
General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Workflow.Client.InternalServerException: Exception thrown from the data layer. For more details, please see the server logs. HTTP headers received from the server
- ActivityId: 0c03f692-8153-43a7-bed5-096214b06168. NodeId: VM22. Scope: /SharePoint/default/d386fdc7-ea7b-4d46-9a39-5c114096eef8/f203a564-e83a-47a3-b11b-e432ac1e6dab. Client ActivityId : 27be1b9c-f990-f096-34a8-7ac8816bc7a5. ---> System.Net.WebException:
The remote server returned an error: (500) Internal Server Error. at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result) at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(... 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08* w3wp.exe (0x071C) 0x085C SharePoint Foundation
General ajlz0 High ...IAsyncResult result) at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest
request, T content) --- End of inner exception stack trace --- at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content) at Microsoft.Workflow.Client.InstanceManager.GetInternal(Int32
skip, Int32 count, String workflowName, WorkflowInstanceStatus workflowStatus, IDictionary`2 activationMetadataFilter) at Microsoft.SharePoint.WorkflowServices.FabricWorkflowInstanceProvider.EnumerateByMonitoringParameter(Guid monitoringParameter,
Int32 offset, Int32 count, Boolean checkPermissions) at Microsoft.SharePoint.WorkflowServices.FabricWorkflowInstanceProvider.EnumerateInstancesForListItem(Guid listId, Int32 itemId, Int32 offset) at Microsoft.Sh... 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08* w3wp.exe (0x071C) 0x085C SharePoint Foundation
General ajlz0 High ...arePoint.WorkflowServices.FabricWorkflowInstanceProvider.EnumerateInstancesForListItem(Guid
listId, Int32 itemId) at Microsoft.SharePoint.WorkflowServices.ApplicationPages.WorkflowPageBase.ConstructStatusArraysWF4(ArrayList running, ArrayList completed, Boolean onlyMyWorkflows) at Microsoft.SharePoint.WorkflowServices.ApplicationPages.WorkflowPage.ConstructStatusArrays()
at Microsoft.SharePoint.WorkflowServices.ApplicationPages.WorkflowPage.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStages... 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08* w3wp.exe (0x071C) 0x085C SharePoint Foundation
General ajlz0 High ...AfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08 w3wp.exe (0x071C) 0x085C SharePoint Foundation
General aat87 Monitorable 27be1b9c-f990-f096-34a8-7ac8816bc7a5
Some sort of "general server error" returns a 500 code, but I can't tell from this what the problem(s) might be. Has anyone seen this before?
Thanks.Go to the server running Workflow Manager and open the Event Viewer; Applications and Services Logs; Microsoft-Workflow; Operational; and look for the underlying error. In our case, the CU for Workflow Manager did something to the SQL permissions and
we ended up using the workaraound described here:
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/054d2a58-8847-4a6a-b1ab-05a79f49fe65/workflow-manager-cumulative-update-february-error?forum=wflmgr
Joe -
RPAS Web Deployment - Error 500--Internal Server Error
Trying to install the RPAS Client 13.2 via the Web Deployment using Weblogic WITHOUT Single SignOn (SSO).
The RPAS.war file was un-jarred, propfile modified and re-jarred. The RPAS.war file was deployed into Weblogic (10.3.2) and is active. When I try to run the RPAS Web Config from Iexplorer, I received the following error message:
Error 500--Internal Server Error
java.lang.NullPointerException
at com.retek.mdap.server.servlet.ServletManager.init(Unknown Source)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:531)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:235)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Here's the modified propfile:
# The following locations must be configured by administrators based on their
# installation
# /nfs/path/to/data/RPASWebData
# /app/weblogic/rpas132
dbPath=/app/weblogic/rpas132/RPASWebData/db
clientSourceDir=/app/weblogic/rpas132/RPASWebData/client
tunnelLogFile=/app/weblogic/rpas132/RPASWebData/logs/tunnel.NDCVRPASP02.PRODUCTION.FR-PROD.XX.COM.log
webLogFile=/app/weblogic/rpas132/RPASWebData/logs/rpasPortal.NDCVRPASP02.PRODUCTION.FR-PROD.XX.COM.log
isOSSO=false
debug=false
classicMode=false
launchPreinstalledOnly=false
supportMultipleVersions=false
defaultInstallDir=C:\\RPASClient
Edited by: user1438559 on Oct 20, 2010 7:20 AM
Edited by: user1438559 on Oct 20, 2010 7:22 AM
Edited by: user1438559 on Oct 20, 2010 7:22 AMAddition to my original issue...
Since I could not get the RPAS Web Deployment to work on WebLogic Server (without SSO Support), I thought I would try the install on Apache Tomcat.
This worked out of the box without any issues, so it seems my issue is on the WebLogic Server. Does anyone have any feedback on why it doesn't work on WebLogic? -
Error 500--Internal Server Error while opening a taskflow in inline popup
Hi,
I am getting "Error 500--Internal Server Error" while opening a bounded taskflow as a popup from another bounded taskflow containing page fragments. The popup taskflow contains jspx pages. I even removed the jspx pages from the popup taskflow to check if the error is resulting from the bindings on the pages but still I get the same error. The entire stack trace of the error in the popup dialog is :
Error 500--Internal Server Error
oracle.adf.controller.ControllerException: ADFC-04008: The BindingContext on the session is null.
at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:208)
at oracle.adfinternal.controller.util.model.AdfmUtil.getBindingContext(AdfmUtil.java:47)
at oracle.adfinternal.controller.util.model.DCFrameImpl.makeCurrent(DCFrameImpl.java:125)
at oracle.adfinternal.controller.state.ViewPortContextImpl.makeCurrent(ViewPortContextImpl.java:1006)
at oracle.adfinternal.controller.state.RequestState.setCurrentViewPortContext(RequestState.java:159)
at oracle.adfinternal.controller.state.ControllerState.setRequestState(ControllerState.java:900)
at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart1(ControllerState.java:355)
at oracle.adfinternal.controller.application.SyncNavigationStateListener.beforePhase(SyncNavigationStateListener.java:105)
at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:112)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:59)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:258)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Any help is greatly appreciated.
Thanks,
KKHi Frank,
Thanks for the reply. I am using it as an inline popup. I am trying to create command links dynamically in an iterator. When a link is clicked a popup window opens. The text of the link is passed to the popup window by creating a variable in the session scope ( I even tried request scope) by an action listener in the backing bean.
I tried to create another simple application with a static command button which passes its text to popup window through a session scope variable. It worked fine. I am not sure why the same procedure is not working in my original application. Can you give me a hint what could possibly go wrong according the exception stack trace ?
Thanks,
KK -
Error 500--Internal Server Error while trying to create a new DataModel
Infrastructure_: OBIEE 11.1.1.5 on 64 bit Linux (RHEL)
Issue:* We get Error 500--Internal Server Error whenever we try to create a new data model in BI Publisher.
Details:* We installed OBIEE 11.1.1.5 on 64 bit Linux machine. Whenever we try to create a new data model in BI Publisher, the page errors out with the message
"Error 500--Internal Server Error, From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request"
Edited by: user9544005 on Dec 29, 2011 7:02 AMHello,
I would prefer local language instead of US english.....
My tips.
1. DID you tried to Not apply the UDO/UDF things?
2. Do not log in to the database, start from
3. Please post the error message itself....
4. If you are running on MS SQL 2005 server (not express) , You can start SQL profiler, and monitor the New Database creation.... you will see in profielr where is the error message and which tables / data is missing.
If i know well,
When you create a new company, the SBO-COMMON database is used to deploy the new database....
If you get stock, reinstall your sbo-common from the last applyied patch..... (Detach SBO-common, move the files another directory, and start upgarder.exe).
Regards,
J. -
Error 500--Internal Server Error when running Facelet in Local Server
Hi Experts,
I have installed M2E plugin for eclipse and working on a Maven project in OEPE 12c.
Running the facelet on the remote server , the results are returned, wheras running the facelet in the local server , the below error occurs
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.getMetadataFacelet(DefaultFaceletFactory.java:209)
at com.sun.faces.application.view.ViewMetadataImpl.createMetadataView(ViewMetadataImpl.java:114)
at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:233)
Could anybody share some pointers?
Thanks,
VijayaI created the showModule.xhtml in the web.view.module\src\main\resources folder and test the application and Now I'm getting the error in both deployment ways.
a) Local deployment: Same result
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
b) Remote server:
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
Please check the below screenshots for the mappings captured in the properties window.
http://imageshack.us/photo/my-images/5/srwebviewmodule.png/
http://imageshack.us/photo/my-images/811/eclipseexplorer.png/
http://imageshack.us/photo/my-images/521/cdiandrichfacesear.png/
http://imageshack.us/photo/my-images/90/cdiandrichfaces.png/
Thanks,
Vijaya -
Error 500--Internal Server Error in a Project Gantt Chart portlet
Hi All
I am getting Error 500--Internal Server Error in a Project Gantt Chart portlet of Corporate Dashboard.
We have recently installed the Primavera EPPM 8.1, here are the steps we followed to setup the Primavera EPPM 8.1
1) We have created the database schemas by using automatic database setup(by clicking on dbsetup.bat on the media files)
2) Installed Weblogic server 11gR1(10.3.4)
3)Created web logic domain as admin server
4) Installed P6 Web access and deployed on weblogic domain
5)Made changes to setEnvDomain file of weblogic domain to increase the Java Heap size and to locate the location of p6.war file
6)Reastred the weblogic domain
Now we can access the Primavera but in one of the portlet we are getting Error 500--Internal Server Error.
Please le me know if I miss any thing while installing or should I modify P6 configuration settings through p6 admin confiuration console.
Also it would be greatful if any one provide me th best practice to setup Primavera EPPM 8.1.
Thanks & Best Regards
PradeepHello Pradeep
please delete a folder called fmwconfig in the path yourdomain\config\ for a folder called fmwconfig
restart P6 and try again -
HTTP error: 500 (Internal Server Error) while creating content server repst
Hi All,
I am getting the HTTP error as mentioned below,
HTTP error: 500 (Internal Server Error)"CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver
Manager] Data s
My content server is running on a Microsoft Cluster Environment.
I tried to follow the steps in the SAP note 301352.
Please help me in registering the LiveCache ODBC driver.
When i excute the the odbcreg.exe file i get the foll,
E:\sapdb\programs\pgm>odbcreg.exe
DriverName=MaxDB
Driver=e:\sapdb\programs\pgm\sqlod32.dll
Setup=e:\sapdb\programs\pgm\sqlsp32.dll
Version=7.6.0.0
Please help me in registering the Livecache ODBC driver.
Expecting your kind reply.
Vineethhi Vineeth Damodar
do it in command prompt.
change the drive letter ...where u install the sapdb.
D:\odbcreg LiveCache -i -p d:\sapdb\programs\pgm
it will prompt that LIvecache is registred. Restart the server.
then check in control panel...
The LiveCache ODBC driver should then be registered in the Control Panel -> ODBC Drivers -> Driver tab
-- Lee
rewared points .. if it helpful for u.... -
When I connect to the SharePoint site that contains the lists I need to build my query from , Power Query enumerates the list and displays them in the tool. I can click on the system tables and view the records but any table
in the list I created returns this error.
I can connect fine with InfoPath
[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
thank you for your help
Andrew
Hi Andrew. In order for us diagnose this issue, you'll need to capture some network traces using a tool such as Fiddler and share them by sending a Frown.
To capture a trace using Fiddler, start Fiddler, enable the Tools > Fiddler Options > HTTPS > Decrypt HTTPS traffic option, start the capture, reproduce your issue, then stop and save the capture. You can find more information here.
Once you've done that, please send a Frown through the Power Query ribbon and attach the traces.
Thanks,
Ehren -
Error 500--Internal Server Error:How to modify req.setReportAbsolutePath
I test a servlet but I get following errors. I use OBIEE 11g and Jdeveloper 11.1.1.3
How to modify the source code and the req.setReportAbsolutePath?
===============error====================
http://127.0.0.1:7101/Application4-Project4-context-root/bipservlettest
Error 500--Internal Server Error
java.lang.NullPointerException
at java.io.OutputStream.write(OutputStream.java:58)
at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
========source code============
package mywebcenter;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.*;
import javax.servlet.http.*;
import com.oracle.xmlns.oxp.service.publicreportservice.AccessDeniedException;
import com.oracle.xmlns.oxp.service.publicreportservice.AccessDeniedException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.DeliveryRequest;
import com.oracle.xmlns.oxp.service.publicreportservice.InvalidParametersException;
import com.oracle.xmlns.oxp.service.publicreportservice.InvalidParametersException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.LocalDeliveryOption;
import com.oracle.xmlns.oxp.service.publicreportservice.OperationFailedException;
import com.oracle.xmlns.oxp.service.publicreportservice.OperationFailedException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportService;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportServiceClient;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportServiceService;
import com.oracle.xmlns.oxp.service.publicreportservice.ReportRequest;
import com.oracle.xmlns.oxp.service.publicreportservice.ReportResponse;
import com.oracle.xmlns.oxp.service.publicreportservice.ScheduleRequest;
import java.io.IOException;
import java.io.OutputStream;
import java.io.PrintWriter;
import java.net.URL;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.xml.namespace.QName;
public class BipServletTest extends HttpServlet {
private static final String CONTENT_TYPE =
"text/html; charset=windows-1252";
private static PublicReportServiceService publicReportServiceService;
public void init(ServletConfig config) throws ServletException {
super.init(config);
public void doGet(HttpServletRequest request,
HttpServletResponse response) throws ServletException,
IOException {
response.setContentType(CONTENT_TYPE);
OutputStream os = response.getOutputStream();
//PrintWriter out = response.getWriter();
String sid = "";
System.out.println("===57===");
publicReportServiceService = new PublicReportServiceService(new URL("http://localhost:9704/xmlpserver/services/PublicReportService"),
new QName("http://xmlns.oracle.com/oxp/service/PublicReportService",
"PublicReportServiceService"));
PublicReportService publicReportService =
publicReportServiceService.getPublicReportService();
//To get a session id
System.out.println("===64===");
try {
sid = this.getSessionID("weblogic", "welcome1", publicReportService);
} catch (AccessDeniedException_Exception e) {
System.out.println("invalid user");
//To generate a report and display it
System.out.println("===72===");
ReportResponse res = this.getReportInSession(publicReportService, sid);
byte[] binaryBytes = res.getReportBytes();
os.write(binaryBytes);
response.setContentType(res.getReportContentType());
public String getSessionID(String username, String password, PublicReportService publicReportService) throws AccessDeniedException_Exception {
String sid = publicReportService.login(username, password);
return sid;
public ReportResponse getReportInSession(PublicReportService publicReportService,
String sid) {
ReportRequest req = new ReportRequest();
ReportResponse res = new ReportResponse();
System.out.println("===89===");
req.setAttributeFormat("pdf");
req.setAttributeLocale("en-US");
req.setAttributeTemplate("Simple");
req.setReportAbsolutePath("E:\\OracleBI_win2008_32_20101206\\user_projects\\domains\\bifoundation_domain\\config\\bipublisher\\repository\\Reports\\Samples\\11g Overview\\W2 2010.xdo");
//req. setSizeOfDataChunkDownload (-1); //download all
try {
System.out.println("99");
res = publicReportService.runReportInSession(req, sid);
System.out.println("101");
System.out.println("===100==="+res.getReportContentType());
} catch (Exception e) {
System.out.println(e);
System.out.println("===107===");
return res;
============Jdeveloper console==================
[Another instance of the application is running on the server. JDeveloper redeploy the application.]
[Application Application4 stopped but not undeployed from Server Instance IntegratedWebLogicServer]
[Running application Application4 on Server Instance IntegratedWebLogicServer...]
[12:45:14 PM] ---- Deployment started. ----
[12:45:14 PM] Target platform is (Weblogic 10.3).
[12:45:14 PM] Retrieving existing application information
[12:45:14 PM] Running dependency analysis...
[12:45:14 PM] Deploying 2 profiles...
[12:45:15 PM] Wrote Web Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\Application4\Project4WebApp.war
[12:45:15 PM] WARNING: Connection ApplicationDB has no password. ApplicationDB-jdbc.xml file not generated for connection ApplicationDB.
[12:45:15 PM] Wrote Enterprise Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\Application4
[12:45:15 PM] Redeploying Application...
[12:45:17 PM] Application Redeployed Successfully.
[12:45:17 PM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[12:45:17 PM] http://192.168.1.17:7101/Application4-Project4-context-root
[12:45:17 PM] Elapsed time for deployment: 4 seconds
[12:45:17 PM] ---- Deployment finished. ----
Run startup time: 3547 ms.
[Application Application4 deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/Application4-Project4-context-root/bipservlettest
===57===
===64===
===72===
===89===
99
javax.xml.ws.soap.SOAPFaultException: oracle.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport failed: due to oracle.xdo.servlet.CreateException: Report definition not found:E:\OracleBI_win2008_32_20101206\user_projects\domains\bifoundation_domain\config\bipublisher\repository\Reports\Samples\11g Overview\W2 2010.xdo
===107===
<Dec 8, 2010 12:45:24 PM PST> <Error> <HTTP> <BEA-101020> <[ServletContext@26496369[app:Application4 module:Application4-Project4-context-root path:/Application4-Project4-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.NullPointerException
at java.io.OutputStream.write(OutputStream.java:58)
at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
Truncated. see log file for complete stacktrace
>
<Dec 8, 2010 12:45:24 PM PST> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'DefaultServer' has triggered at Dec 8, 2010 12:45:24 PM PST. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Dec 8, 2010 12:45:24 PM PST SERVER = DefaultServer MESSAGE = [ServletContext@26496369[app:Application4 module:Application4-Project4-context-root path:/Application4-Project4-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.NullPointerException
at java.io.OutputStream.write(OutputStream.java:58)
at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = WIN-IT8WDLG81KH TXID = CONTEXTID = 55211ca27b9d1dfd:bd42a62:12cc7606a10:-8000-000000000000009c TIMESTAMP = 1291841124147
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<Dec 8, 2010 12:45:34 PM PST> <Alert> <Diagnostics> <BEA-320016> <Creating diagnostic image in c:\users\administrator\appdata\roaming\jdeveloper\system11.1.1.3.37.56.60\defaultdomain\servers\defaultserver\adr\diag\ofm\defaultdomain\defaultserver\incident\incdir_12 with a lockout minute period of 1.>am able to login
http://192.168.75.140:7001/console/login/LoginForm.jsp
from this environment-> servers-> all servers(adminserver,soa_server1, oim_server1, oam_server1) status is running,and health is ok.
I have started these servers from command line <base_domain/bin/sh startManagedWebLogic.sh oim_server1
result is <server started in running mode>
now I shutdown the oam_server1 and oim_server1
again I started the oim_server1 as above
command line result is < <May 30, 2013 7:54:47 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
but in (http://localhost:7001/console) window oim_server1 status is unknown... -
Error 500--Internal Server Error - when deploying strust application
Hello everyone,
We have a large strust-based web application. The application is being deployed as an EAR file.
We are getting a NullPointerException when we deploy the application on Weblogic 8.1 in production mode. The exception
occurs when we access the application for the first time after redeployment.
When we restart the server entirely we do not get the exception anymore.
This exception does occur only rarely in development mode.
In production mode it occurrs every time.
Has anyone experienced similar issues?
Regards,
Oliver Enseling
Error 500--Internal Server Error
java.lang.NullPointerException
at org.apache.struts.action.RequestProcessor.getServletContext(RequestProcessor.java:1136)
at org.apache.struts.tiles.TilesRequestProcessor.processTilesDefinition(TilesRequestProcessor.java:180)
at org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(TilesRequestProcessor.java:309)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1480)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:506)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at com.gelco.tmg.planning.web.core.action.URLSecurityFilter.doFilter(URLSecurityFilter.java:69)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6458)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)<[email protected]> wrote in message news:41c49d78$1@mail...
The problem seems to occur due to servlet reloading.... There seems to be
a bug that reloads the ActionServlet even without any changes made to the
code base... The reload fails for the ActionServlet making it null
Turn off servlet reloading in your weblogic.xml using
<container-descriptor>
<servlet-reload-check-secs>-1</servlet-reload-check-secs>
</container-descriptor>
Let me know if this helps ...The default is to check for every one sec... I am not sure whether these
kind of defaults make sense once a application is moved into production
mode...
If the issue gets resolved with the above suggested workaround .... let me
know... since the issue is spurious and I am trying to reach a higher
confidence level in the solution proposed by me.....
Thanks
Kumaraguruparan Karuppasamy
>
>
>
"Bill Turchin" <[email protected]> wrote in message
news:25319409.1102534305264.JavaMail.root@jserv5...
I am now also seeing that error having recently upgraded to WL 8.1. Has
anyone found the solution? -
Error 500--Internal Server Error.PLEASE HELP .
hi,
I am using BEA weblogic server 9.0.i created a new domain named myproject.I have created directory mywebapp under applications dir.
i.e C:\bea\user_projects\domains\myproject\applications\mywebapp
I have placed my servlet class in :
C:\bea\user_projects\domains\myproject\applications\mywebapp\WEB-INF\classes\Mypackage
I deployed my apllication mywebapp using admin console.
when i run the program in the browser,i get this error:
Error 500--Internal Server Error
javax.servlet.ServletException: [HTTP:101249][weblogic.servlet.internal.WebAppServletContext@17e5fde - name: 'mywebapp', context-path: '/mywebapp']: Servlet class HelloServlet for servlet myHello could not be loaded because the requested class was not found in the classpath C:\bea\user_projects\domains\myproject\applications\mywebapp\WEB-INF\classes.
java.lang.ClassNotFoundException: HelloServlet.
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:497)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:234)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:2970)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1888)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1810)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1274)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:167)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:139)
what should i do?please help me.
byeyou are reason our error is slightly different is
Error 500--Internal Server Error
javax.servlet.ServletException: [HTTP:101249][ServletContext(id=21255917,name=BonusRoot,context-path=/BonusRoot)]: Servlet class Beans.BonusServlet for servlet BonusServlet could not be loaded because the requested class was not found in the classpath C:\bea\weblogic81\samples\domains\workshop\cgServer\.wlnotdelete\essai\war-ic.war.
java.lang.ClassNotFoundException: Beans.BonusServlet.
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:799)
at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:518)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:362)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
We have try with your proposition but we find the same error
we must request servlet??? because i've one
package Beans;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import javax.naming.*;
import javax.rmi.PortableRemoteObject;
public class BonusServlet extends HttpServlet {
CalcHome homecalc;
public void init(ServletConfig config) throws ServletException{
//Look up home interface
try {
InitialContext ctx = new InitialContext();
Object objref = ctx.lookup("calcs");
homecalc = (CalcHome)PortableRemoteObject.narrow(objref, CalcHome.class);
} catch (Exception NamingException) {
NamingException.printStackTrace();
public void doGet (HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException
String socsec = null;
int multiplier = 0;
double calc = 0.0;
PrintWriter out;
response.setContentType("text/html");
String title = "EJB Example";
out = response.getWriter();
out.println("<HTML><HEAD><TITLE>");
out.println(title);
out.println("</TITLE></HEAD><BODY>");
try{
Calc theCalculation;
//Retrieve Bonus and Social Security Information
String strMult =
request.getParameter("MULTIPLIER");
Integer integerMult = new Integer(strMult);
multiplier = integerMult.intValue();
socsec = request.getParameter("SOCSEC");
//Calculate bonus
double bonus = 100.00;
theCalculation = homecalc.create();
calc = theCalculation.calcBonus(multiplier, bonus);
}catch(Exception CreateException){
CreateException.printStackTrace();
//Display Data
out.println("<H1>Bonus Calculation</H1>");
out.println("<P>Soc Sec: " + socsec + "<P>");
out.println("<P>Multiplier: " + multiplier + "<P>");
out.println("<P>Bonus Amount: " + calc + "<P>");
out.println("</BODY></HTML>");
out.close();
public void destroy() {
System.out.println("Destroy");
}Help us please
Thanks -
Error 500--Internal Server Error when using BI Publisher within OBIEE 11g
I'm using OBIEE 11.1.1.6.2BP1 on a Linux x86-64 server and it has been working just fine. We recently started playing around with the BI Publisher component of that installation and every time i go to http://hostname:port/xmlpserver and try to log in with an Administrator username and password, the following error shows up:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.5.1 500 Internal Server Error*
The server encountered an unexpected condition which prevented it from fulfilling the request.
I have looked around for solutions and tried a couple of them (created a new Admin user in Weblogic Console and checked the opmnctl status) and they did not help. I'm looking for an answer other than upgrade to the latest and greatest
Any help is appreciated.Do you have any SSO setup as that might be preventing the ability of the user to log into BI Publisher, hence the Internal 500 error message.
Are you using FMW security model for BIP and OBIPS integration which is by default. Check the xmlp-server-config.xml file from the repository [\Middleware\Oracle_BI1\clients\bipublisher\repository\Admin\Configuration\xmlp-server-config.xml] and see what your security model is pointing to?
Also what happens when you try to access from Administration>BI Publisher >Manager BI Publisher ?
Follow : http://docs.oracle.com/cd/E23943_01/bi.1111/e22255.pdf
Oracle Fusion MiddlewareAdministrator's Guide for Oracle Business Intelligence Publisher 11g Release 1
HTH,
SVS
Maybe you are looking for
-
Send idoc to other system via SOAP
Hi, I intend to implement an interface with other system non SAP, to send idocs via SOAP. I've read some documentation on sdn but i'm very confused about Was / XI / BSP and some others terms. Please, can someone help me, driving me to the right way a
-
BUG: Video layers black, not displaying
I've edited now for a week with FCP X v. 10.0 and have just run into a bug and haven't found a workaround for it yet. I have a project that has apparently gotten corrupted somewhere along the way. It was working before, but when I tried to export m
-
Hi, We have installed Foundation Services in Planning server and HFM in HFMserver(Giving the configuration details of Foundation services of Planning Server) When we openning Consolidation administration we aare getting below error. Description: Inva
-
How can I make the PSE 12 workspace menus on my laptop large enough to read
I've just bought a Lenovo laptop and loaded PSE 12 but can't read any of the menu's as the text is so, so tiny. How can I adjust the settings?
-
My telephone line was installed nearly 40 years ago by Post Office Telephones (original name for BT), and since that time has only been replaced once, if my failing memory is correct. We have always paid our bills when due, and I cannot remember a t