I receive an error while trying to partition my Harddrive back to one.

So I have messed around with using bootcamp and and disk utlity to create partitions for Ubuntu. I decided to erase the extra partition and give all the space back to my macintosh HD. I go to the partition tab in disk utility and drag the macintosh box to fill the whole box and then hit apply. After a few moments I then recieve the error saying:
"Partition failed with the error:
Couldn’t modify partition map because file system verification failed."
I ran a verfiy disk on my macintosh hd and then recieve these errors:
Invalid volume file count
(It should be 545026 instead of 544821)
Invalid volume directory count
(It should be 140857 instead of 140673)
Invalid volume free block count
(It should be 123856639 instead of 123864717)
Volume header needs minor repair
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the Mac OS X Utilities window appears, choose Disk Utility.
I then command R while boot and repair the drive. Tried resizing the parition again and same error.
I have spent some time googling what people have done but find this problem occuring with alot of people upgrading to Lion or something. I'm on a 2011-late macbook pro that came with lion.
I have tried things such as doing the Lion restore and booting in command S and typing fsck -fy for a repair. Nothing work.
I am about two hours away from a "genius bar" so fixing this problem on my own is a must.

When disk repair fails, it usually is not a good sign and could mean you ave a failing hardrive. All I can suggest is to back up all your data. My choice would be either SuperDuper or CarbonCopy Cloner
Then do reformat and do a clean install and test.

Similar Messages

  • I receive this error while trying to update to iTunes 10.6.3

    I receive this error while trying to complete an Itunes 10.6.3 update.
    "The update could not be verified. It may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."
    I have tried installing again many times with the same result.  If someone and tell me how to proceed, this would be great!!  Thanks, Kim

    I'd try updating using a .dmg installer downloaded from the Apple Website:
    http://www.apple.com/itunes/download/

  • Receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7

    receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7

    There isn't much here which is actionable.  Please review your installation logs by following the steps listed at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

  • Error while trying to install EBS 12.1.1

    We are getting an error while trying to install EBS R12.1.1 on Linux x86_64 os(RHEL 5.2).We are getting the error at step 2 of 5 during database configuration stage 33% (65%) stage.The error is as given below,
    RW-50004:Error code received when running external process.Check log files for details.Running Database Install Driver for TEST instance.
    We checked the log files and in ApplyDB_****.log the error is
    RW-50010 :script has returned an error: 1
    How to fix these issues??
    Regards,
    Rupdipt

    Hi Taj,
    I am getting these error messages consistently throughout the log file,
    Executing CreateDB...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : testerp
    sDbDomain : eigl.com
    sDbPort : 1521
    sDbSid : TEST
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@testerp.eigl.com:1521:TEST
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST)))
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Trying to connect using SID as ServiceName.DomainName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST.eigl.com)))
    Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
    The Connection descriptor used by the client was:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST.eigl.com)))
    Connection could not be obtained; returning null
    -------------------ADX Database Utility Finished---------------
    adcrdb.sh started at Wed Jul 22 17:47:10 IST 2009
    The environment settings are as follows ...
    ORACLE_HOME : /d01/oracle/TEST/db/tech_st/11.1.0
    ORACLE_SID : TEST
    TWO_TASK :
    PATH : /d01/oracle/TEST/db/tech_st/11.1.0/perl/bin:/d01/oracle/TEST/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/d01/oracle/TEST/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/d04/StageR12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:.
    LD_LIBRARY_PATH : /d01/oracle/TEST/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/TEST/db/tech_st/11.1.0/lib:/usr/dt/lib:/d01/oracle/TEST/db/tech_st/11.1.0/ctx/lib
    Executable : /d01/oracle/TEST/db/tech_st/11.1.0/bin/sqlplus
    The log information will be written to
         /d01/oracle/TEST/db/tech_st/11.1.0/appsutil/log/TEST_testerp/adcrdb_TEST.txt
    Creating the control file for TEST_testerp database ...
    SQL*Plus: Release 11.1.0.7.0 - Production on Wed Jul 22 17:47:11 2009
    Copyright (c) 1982, 2008, Oracle. All rights reserved.
    Connected to an idle instance.
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1068937216 bytes
    Fixed Size          2166536 bytes
    Variable Size          427819256 bytes
    Database Buffers     624951296 bytes
    Redo Buffers          14000128 bytes
    CREATE CONTROLFILE REUSE SET DATABASE "TEST"
    ERROR at line 1:
    ORA-01503: CREATE CONTROLFILE failed
    ORA-01565: error in identifying file
    '/d01/oracle/TEST/db/apps_st/data/system05.dbf'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    alter database open resetlogs
    ERROR at line 1:
    ORA-01507: database not mounted
    alter tablespace TEMP1 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp01.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    alter tablespace TEMP2 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp02.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.eigl.com"
    ERROR at line 1:
    ORA-01109: database not open
    ORA-01507: database not mounted
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1068937216 bytes
    Fixed Size          2166536 bytes
    Variable Size          427819256 bytes
    Database Buffers     624951296 bytes
    Redo Buffers          14000128 bytes
    ORA-00205: error in identifying control file, check alert log for more info
    BEGIN dbms_backup_restore.zeroDbid(0); END;
    ERROR at line 1:
    ORA-00210: cannot open the specified control file
    ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4652
    ORA-06512: at line 1
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1068937216 bytes
    Fixed Size          2166536 bytes
    Variable Size          427819256 bytes
    Database Buffers     624951296 bytes
    Redo Buffers          14000128 bytes
    CREATE CONTROLFILE REUSE SET DATABASE "TEST"
    ERROR at line 1:
    ORA-01503: CREATE CONTROLFILE failed
    ORA-01565: error in identifying file
    '/d01/oracle/TEST/db/apps_st/data/system05.dbf'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    alter database open resetlogs
    ERROR at line 1:
    ORA-01507: database not mounted
    alter tablespace TEMP1 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp01.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    alter tablespace TEMP2 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp02.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.eigl.com"
    ERROR at line 1:
    ORA-01109: database not open
    Error Running create/replace library with adupdlib.sql
    ORA-01109: database not open
    PL/SQL procedure successfully completed.
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    exit_code=0
    Checking for errors ...
    The database has not been successfully created. Shutting down the instance ...
    SQL*Plus: Release 11.1.0.7.0 - Production on Wed Jul 22 17:47:20 2009
    Copyright (c) 1982, 2008, Oracle. All rights reserved.
    Connected.
    ORACLE instance shut down.
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    .end std out.
    .end err out.
    Whats the solution??
    Regards,
    Rupdipt

  • Error while trying to open the discoverer connections page

    Dears,
    please your kindly help!!!
    Error while trying to open the discoverer connections page
    When I tried to open the link http://192.168.4.222:7778/discoverer/viewer
    I received the error:
    An error occurred while handling the event. See the application log for more details.
    A fatal application error has occurred. Please consult with your OracleAS administrator or look at the application log file.
    I checked the OC4J application.log file and I found the following:
    10/03/11 10:34:16 discoverer: [ERROR] [AJPRequestHandler-ApplicationServerThread-6] oracle.discoverer.applications.framework.
    GlobalExceptionHandler.execute null
    java.lang.NullPointerException
    at java.io.FileOutputStream.<init>(FileOutputStream.java:172)
    at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
    at java.awt.Font$2.run(Font.java:606)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.awt.Font.createFont(Font.java:600)
    at oracle.discoverer.renderer.pdf.XDOConfig._discoverFonts(Unknown Source)
    at oracle.discoverer.renderer.pdf.XDOConfig.<init>(Unknown Source)
    at oracle.discoverer.renderer.pdf.XDOConfig.getNewInstance(Unknown Source)
    at oracle.discoverer.renderer.pdf.PDFGenerator.initPDF(Unknown Source)
    at oracle.discoverer.applications.viewer.model.ViewerApplication.init(Unknown Source)
    at oracle.discoverer.applications.framework.ApplicationFactory.create(Unknown Source)
    at oracle.discoverer.applications.framework.ApplicationController.getApplication(Unknown Source)
    at oracle.discoverer.applications.framework.ApplicationController.execute(Unknown Source)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
    invoke(ServletRequestDispatcher.java:824)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
    forwardInternal(ServletRequestDispatcher.java:330)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
    forward(ServletRequestDispatcher.java:222)
    at oracle.discoverer.applications.viewer.url.URLServlet._process(Unknown Source)
    at oracle.discoverer.applications.viewer.url.URLServlet.doGet(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFil
    ter(ResourceFilterChain.java:65)
    at oracle.discoverer.applications.framework.ApplicationEncodingFilter.doFilter(Unknown Source)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
    invoke(ServletRequestDispatcher.java:663)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
    forwardInternal(ServletRequestDispatcher.java:330)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.proces
    sRequest(HttpRequestHandler.java:830)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJP
    RequestHandler.java:224)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJP
    RequestHandler.java:133)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor
    $MyWorker.run(ReleasableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    10/03/11 10:34:16 discoverer: [ERROR] [AJPRequestHandler-ApplicationServerThread-6] oracle.discoverer.applications.framework.
    ApplicationController._logException error.handling.event
    oracle.discoverer.applications.framework.ApplicationException: error.handling.event
    at oracle.discoverer.applications.framework.GlobalExceptionHandler.execute(Unknown Source)
    at org.apache.struts.action.RequestProcessor.processException(RequestProcessor.java:553)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:486)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
    invoke(ServletRequestDispatcher.java:824)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
    forwardInternal(ServletRequestDispatcher.java:330)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
    forward(ServletRequestDispatcher.java:222)
    at oracle.discoverer.applications.viewer.url.URLServlet._process(Unknown Source)
    at oracle.discoverer.applications.viewer.url.URLServlet.doGet(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFil
    ter(ResourceFilterChain.java:65)
    at oracle.discoverer.applications.framework.ApplicationEncodingFilter.doFilter(Unknown Source)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
    invoke(ServletRequestDispatcher.java:663)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
    forwardInternal(ServletRequestDispatcher.java:330)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.proces
    sRequest(HttpRequestHandler.java:830)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJP
    RequestHandler.java:224)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJP
    RequestHandler.java:133)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor
    $MyWorker.run(ReleasableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    Caused by: java.lang.NullPointerException
    at java.io.FileOutputStream.<init>(FileOutputStream.java:172)
    at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
    at java.awt.Font$2.run(Font.java:606)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.awt.Font.createFont(Font.java:600)
    at oracle.discoverer.renderer.pdf.XDOConfig._discoverFonts(Unknown Source)
    at oracle.discoverer.renderer.pdf.XDOConfig.<init>(Unknown Source)
    at oracle.discoverer.renderer.pdf.XDOConfig.getNewInstance(Unknown Source)
    at oracle.discoverer.renderer.pdf.PDFGenerator.initPDF(Unknown Source)
    at oracle.discoverer.applications.viewer.model.ViewerApplication.init(Unknown Source)
    at oracle.discoverer.applications.framework.ApplicationFactory.create(Unknown Source)
    at oracle.discoverer.applications.framework.ApplicationController.getApplication(Unknown Source)
    at oracle.discoverer.applications.framework.ApplicationController.execute(Unknown Source)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
    ... 21 more
    10/03/11 10:34:16 discoverer: TemplateUINode, localName='documentTemplate': /u01/oracle/ias/j2ee/OC4J_BI_Forms/applications/d
    iscoverer/discoverer/cabo/styles/dc-blaf.xss: Parsing error, line 5, column 22: <laf> is not an understood element.
    This sometimes means the element's namespace (http://xmlns.oracle.com/uix/style) is set incorrectly. This may also be an issue with the syntax of its parent element.
    Please anyone can help.
    Best Regards ,
    Yasser

    Welcome to the forums !
    Pl see if MOS Doc 360403.1 (Launcing Discoverer Plus Fails With Error "Oracle.Discoverer.Applications.Framework.Globalexceptionhandler.Execute Null" in Application.log File) is applicable in your case
    HTH
    Srini

  • Error while trying to use Photomerge and stitch a few pictures with Photoshop CC 14 on Windows 8.1

    I am getting an error while trying to merge some pictures together using photomerge in photoshop cc14, it says photoshop has encounter an error, and it closes photoshop after that, I cannot use photomerge at all, everything else works fine. Any help anyone???

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • GarageBand: Error while trying to synchronize Audio and MIDI.

    This error recently started popping up for me while using garageband.
    GarageBand: Error while trying to synchronize Audio and Midi
    Sample rate xxxxxx recognized
    Check conflict between garageband and external device
    When I use garageband, my input and output are usually set to my scarlett 2i2 interface and I've never received the synchronizing error before today.  I am not using any Midi.
    I've checked the Audio Midi Setup tool to make sure that my format is at 44100.0Hz and have set the "sound" in system preferences to use my scarlett 2i2 interface for input and built-in system for output.
    Can anyone help me out with why i'm receiving this error?

    Good grief!  I'm on a Mac OS X and was having this same problem.  All these discussions about so much technical jargon just had me exhausted ... not only did I not understand what was being referred to, but I couldn't imagine how to do what was being said.
    Here's what got me straight:
    1.  Go to System Preferences and click on Sound
    2.  Click on Input and select your USB mic (or whatever you're using)
    3.  Click on Output and select Internal Speakers
    Done.  No more problem with Garageband!

  • Re: ERROR while trying to synchronize Audio and MIDI

    Hi Guys/Gals
    A bit of a strange one. Yes, I have posted a similar question concerning my trusted 2.7ghz G5 PPC and my Digidesign 003R which it turned out that the Digi's FW ports were to blame.
    New issue. I have just completed an install on a client's machine, here's it's specs etc:
    Hardware:
    iMac 2.8Ghz Duo Core Intel, 4Gb ram, 500Gb HD etc (the custom top end before last week's upgrade) arrived last week. Running Leopard 10.5.2 and has all the latest updates. (firmware/software)
    Apogee Ensemble (with newest firmware update/upgrade)
    Iomega ULTRAMAX HARD DRIVE 1TB USB 2.0/FIREWIRE® 400/800 (sorry, copied from their site)
    M-Audio Axiom 49 USB Midi controller/keyboard
    Software:
    Logic Pro 8 (latest 8.0.1) All standard plugs/samples, no third parties at all, just 100% Apple install.
    Reason 4 (latest 4.0.1)
    I reformatted the built-in hd to two partitions of equal size, one for the OS and one for whatever. I formated the external terrabyte into two partitions also of equal size, non are journalized, all are GUI partitions. I copied the LP 8 demos to both the internal "spare" partition and to the primary "Audio1" partition of the external drive. The Iomega HD is connected via the 800FW port and the Apogee Ensemble is connected via the 400FW port (the iMac has one of each). If I play any of the demo songs from the internal partition, they play perfectly, if I play them off the external Iomega partitions (either) within 8 bars I get:
    "Error while trying to synchronize Audio and MIDI
    Sample Rate 45946 recognized.
    Check conflict between Logic Pro and external device."
    As I said, any demo played back from the internal drives absolutely perfectly..... Any ideas?
    Cheers!!
    Bobs

    There are a lot of different opinions about partitioning in Mac OS X and you can read some of them here:
    http://forums.cnet.com/5208-7592_102-0.html?forumID=25&threadID=44865&messageID= 530144
    and here
    http://forums.appleinsider.com/archive/index.php/t-8096.html
    My opinion is that partitions cam be useful when:
    1. the OS can't manage big volumes (as it was in the past)
    2. the OS can't optimize the space on big volumes
    3. want to install 2 or more separate OSes
    4. organization (like in your case).
    Now, OS X filesystem (HFS+) is robust and reliable and OS X is a multitasking system that parallelizes I/O operations like reading or writing a disk.
    So if you have 2 separate hard disk the system can parallelize the operations (i.e. reading from one and writing into another one) but if you have 2 partitions the system (or better the disk subsystem) have to jump back and forth among the partitions.
    About the linking schema of the Audio interfaces and the FW hard disks it can change: I connect my FW disk to the MOTU and the MOTU to the mac while a friend of mine have to put the disk before of his Presonus.
    Thanks for the beer!
    cheers
    rob

  • ORA-20600 error while trying to add RAC database

    I'm receiving the following error while trying to add the RAC database in grid control. Any idea?.
    ORA-20600: The specified target is in the process of being deleted
    This database doesn't exists in targets. But, I'm still unable to add.

    Check the metalink Note: Unable To Add Rac Database To Grid Control Getting Error Ora-20600 [ID 1218797.1]
    You need to wait for a while and check the status.

  • Getting error while trying to create the push certificate...

    I am getting the following error while trying to create a push certificate for the mdm from the apple site.
    Certificate Signature Verification failed because the signature  is invalid.
    I am mdm vendor as well as the customer. I did the following steps.
    openssl x509 -inform der -in mdm_identity.cer -out mdm.pem
    openssl x509 -inform der -in AppleWWDRCA.cer -out intermediate.pem
    openssl x509 -inform der -in AppleIncRootCertificate.cer -out root.pem
    openssl req -inform pem -outform der -in customer.csr -out customer.der
    created the plist_encoded file using a java program which uses the "SHA1WthRSA"
    When i tried to upload the plist_encoded file to the apple site (https://identity.apple.com/pushcert/), it creates a file with the following error
    {"ErrorCode":-80018,"ErrorMessage":"Certificate Signature Verification failed","ErrorDescription":"Certificate Signature Verification failed because the <a href=\"http://www.apple.com/business/mdm\" target=\"_blank\">signature<\/a> is invalid."}
    Any help would be greatly appreciated....

    Please see the solution in (The Descriptive Flexfield With Application Name Receivables (AR) and Name Party Site Information (HZ_PARTY_SITES) Is Not Frozen [ID 743262.1]).
    Thanks,
    Hussein

  • Getting socket error while trying to get oracle connection using JDBC

    hi,
    I am getting following socket read error while trying to get database connection using JDBC. This happening with jdk1.5.0_12 version with Oracle 9i
    following is the stacktrace...
    Thread t@92: (state = IN_NATIVE)
    - java.net.SocketInputStream.socketRead0(java.io.FileDescriptor, byte[], int, int, int) @bci=0 (Compiled frame; information may be imprecise)
    - java.net.SocketInputStream.read(byte[], int, int) @bci=84, line=129 (Compiled frame)
    - oracle.net.ns.Packet.receive() @bci=31 (Compiled frame)
    - oracle.net.ns.DataPacket.receive() @bci=1 (Interpreted frame)
    - oracle.net.ns.NetInputStream.getNextPacket() @bci=48 (Compiled frame)
    - oracle.jdbc.driver.T4CMAREngine.unmarshalSB1() @bci=1, line=1070 (Compiled frame)
    - oracle.jdbc.driver.T4CStatement.doOall8(boolean, boolean, boolean, boolean) @bci=617, line=207 (Compiled frame)
    - oracle.jdbc.driver.T4CStatement.executeForDescribe() @bci=39, line=790 (Compiled frame)
    - oracle.jdbc.driver.OracleStatement.executeMaybeDescribe() @bci=106, line=1039 (Interpreted frame)
    - oracle.jdbc.driver.T4CStatement.executeMaybeDescribe() @bci=11, line=830 (Interpreted frame)
    - oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout() @bci=128, line=1132 (Interpreted frame)
    - oracle.jdbc.driver.OracleStatement.executeQuery(java.lang.String) @bci=76, line=1272 (Interpreted frame)
    any help would appreciated. thanks in advance

    I do not have exact exception message.
    additionally, i have got following the tomcat log file:
    INFO - Resource pool cleanup thread just woke up.
    Nov 1, 2008 3:41:52 AM org.apache.tomcat.util.threads.ThreadPool logFull
    SEVERE: All threads (100) are currently busy, waiting. Increase maxThreads (100) or check the servlet status
    INFO - Resource pool cleanup thread just woke up.
    thanks in advance

  • HT204053 How to resolve "error while trying to connect to the server."

    Receive "error while trying to connect to the server" on my PC when using iCloud. How to resolve?

    check the below link.
    /people/stephen.johannes/blog/2005/08/18/external-data-loads-for-crm-40-using-xif-adapter

  • Connection Error iCloud encountered an error while trying to connect to the server

    Hi iCloud users
    For the first time I have experienced errors while attempting to connect to iCloud via my PC.  Never had any problems previously.
    The first error I received was:
         "Connection Error - iCloud encountered an error while trying to connect to the server"
    After a few attempts I was able to connect to iCloud.  However I was unable to access my Calendar and Contacts.  I received the following error messages:
         "Can't load Calendar - There was a problem loading the application"
         "Can't load Contacts - There was a problem loading the application"
    Has anyone out there experienced this?  If so could you offer an solutions/suggestions?  Is iCloud not working properly today?
    Many thanks & cheers,
    Sue

    Hi
    I am sorry can't help you because I have same problem when login to icloude.com and try insert to Contacts!
    Many times happen.
    what is issues ?

  • NetStorage encountered an error while trying to access this

    Strange problem with NetStorage. If I log in to NetStorage on Server A I get a listing of my drives from my login script and have no problems accessing any of them. If I log in to Server B I also get a listing of my drives and can access all of them except for the drives on Server A. When I try to access them I get the following error: "NetStorage encountered an error while trying to access this location." Anyone have any ideas on what could be causing the problem?
    Here's the particulars:
    Server A
    OES2 sp3 on SLES 10
    Internal Network
    Server B
    OES2 sp1 on SLES 10
    DMZ Network
    At first I thought this might be a firewall port issue so I had my network guy open ports 80, 443, and 51080 from server B to server A. Didn't fix the problem.
    I have been searching the forums for an answer but, have not found one that helps for this situation. Thanks in advance for your help.

    Originally Posted by mtracy
    Strange problem with NetStorage. If I log in to NetStorage on Server A I get a listing of my drives from my login script and have no problems accessing any of them. If I log in to Server B I also get a listing of my drives and can access all of them except for the drives on Server A. When I try to access them I get the following error: "NetStorage encountered an error while trying to access this location." Anyone have any ideas on what could be causing the problem?
    Here's the particulars:
    Server A
    OES2 sp3 on SLES 10
    Internal Network
    Server B
    OES2 sp1 on SLES 10
    DMZ Network
    At first I thought this might be a firewall port issue so I had my network guy open ports 80, 443, and 51080 from server B to server A. Didn't fix the problem.
    I have been searching the forums for an answer but, have not found one that helps for this situation. Thanks in advance for your help.
    So you have NetStorage installed on both Server A and B and if you log in to NetStorage on Server A you can access storage hosted by both Server A and B but if you log in to NetStorage on Server B you can only access storage on Server B?
    One obvious comment is that Server B is running an old and now unsupported version of OES2 - the only version of OES2 now supported is OES2 SP3 on SLES10 SP4. Theoretically that shouldn't make a difference but I know that whilst NetStorage may not have visibly changed much over OES versions it has received some bug fixes along the way.
    Your comment about firewalls leads me to ask whether that implies you're blocking all the other ports between the two servers? NetStorage uses the XTier framework which in turn uses NCP to access remote servers. NCP uses UDP port 524.
    HTH.

  • Internal server error while trying to link Facebook to Toshiba Places

    I'm seeking for help regarding an issue i encountered while using my toshiba SMART tv. I'm unable to link my facebook account to my toshiba places account, it shows "Internal server error" while trying to link via the link given in the instruction in the email i received.
    Can anyone please help?

    *@ACE-*
    In you case I would recommend checking for new firmware update and after the firmware update, the TV should be reset to the default settings.
    Firmware can be found here: http://www.toshiba-om.net/

Maybe you are looking for