I receive Error code: ssl_error_bad_mac_read on secure Blackboard website (online school work)? I am on a Mac and using FF version 3.6.12? It's starting to interfere with my work please help!

This is getting out of hand and starting to affect my work and quizzes. Please tell me this is something that can be easily fixed? I didn't have the problem til about 2 weeks ago.

bump, anyone?

Similar Messages

TS3992 i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

I have just created this account to tell you that nothing would change if you restored your phone.
The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
So IMO, it's not what you should do to erase and restore your phone.
Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot.

I am trying to download CreativeCloud Setup but am receiving Error code 213. How do I fix this so I can download Adobe Pro XI?

I am trying to download CreativeCloud Setup but am receiving Error code 213. How do I fix this so I can download Adobe Pro XI?

Hi Lynn,
You I'd try running the download again with your anti-virus software disabled using a newly created admin account.
- Dave

How to fix this problem? Secure Connection Failed, SSL received a record with an incorrect Message Authentication Code. (Error code: ssl_error_bad_mac_read)

Secure Connection Failed
SSL received a record with an incorrect Message Authentication Code. (Error code: ssl_error_bad_mac_read)
I have been receiving this error message recently when I tried to access school elearning websites and other school related websites, I have also tried on internet explorer and it shows page cannot be displayed. I have been trying the available solutions to solve it but none of them work. Is there alternative solutions available? Please advise. Thanks.

It works after I disabled IPv6 in Firefox. Thank you for your help :)

I cannot connect to the iTunes Store. I receive Error Code -1202. This problem began yesterday. I have been successfully connecting to the store for months on this PC. I am running Windows 7 and the Windows Security Center. Thanks for any help

TS1368 I cannot connect to the iTunes Store. I receive Error Code -1202. This problem began yesterday. I have been successfully connecting to the store for months on this PC. I am running Windows 7 and the Windows Security Center. Thanks for any help.

Hello alankilner,
And welcome to Apple Discussions!
Using Proxy: Yes
Try temporarily disabling this setting by following the steps outlined in this Apple support document.
http://support.apple.com/kb/TS1490
B-rock

I receive Error code: ssl_error_unsafe_negotiation when I visit any secure site version 3.613

I receive Error code: ssl_error_unsafe_negotiation when I visit any secure site using version 3.613.
I can browse to all of these sites successfully using IE 8.0.6

See this link for information about 'Renegotiation' (CVE-2009-3555):
* http://wiki.mozilla.org/Security:Renegotiation
* https://wiki.mozilla.org/Security:Renegotiation#security.ssl.renego_unrestricted_hosts
You can look at the pref security.ssl.renego_unrestricted_hosts on the about:config page and add the sites that you want to allow to the string value. 
Separate multiple host names by a comma.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
You can use the Filter bar at to top of the about:config page to locate a pref more easily.

I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd.After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality?

I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd. After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality? or any other exporting alternatives?

Hey Z,
Thank you for the tip on exporting by media browser (large) from imovie. But of course, if it's not one thing it's another. Now that I figured how to export a large file from imovie, I have an idvd issue. I followed the instructions for burning from idvd and changing the encoding to professional quality and the burn speed to x4, but I am receiving an error that states the following,
Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window.
Project:
- total project duration: 79:04 minutes
- total project capacity: 4.327 GB (max. available: 4.172 GB)
Menus:
- number of menus in project: 1 menus
- total menu duration: 0:39 minutes
- total menu capacity: 37.370 MB
Movies:
- total movies duration: 78:25 minutes
- total movies capacity: 4.291 GB
I have searched in the idvd forum for similar issues and I am stumped at this point. I have tried deleting the encoding assets and re launching idvd with the changed preferences, and still the same error. I know you mentioned something about free hard drive space available, and I have very little left. 4GB to be exact due to massive hours of non-edited footage. I am not sure if this is why, but I do not recall ever needing free space to burn memory onto a separate dvd. I would be more than happy if I am wrong, and it would be a quick fix. Otherwise, the technical nightmare continues. It's all a learning process and your expertise is greatly appreciated! Thanks in advance.

(error code: ssl_error_bad_mac_read) when trying to log on to Radisson Hotel Narita, Japan guest website. Unable to get on line at all. Everywhere else, Firefox works great.

The Radisson Hotel in Narita Japan uses Guest-Tek as its sign in for guests to access the internet. When I try to log on I first click that I want to use English. The next page has me either agree or disagree to the terms of usage. After I click agree I get a page that says:
Secure Connection Failed
An error occurred during a connection to (website I try)
SSL received a record with an incorrect Message Authentication Code
(Error code: ssl_error_bad_mac_read)
-The page you are trying to view can not be shown because the authenticity of the received data could not be verified
-Please contact the web site owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site
(There is a button here that says "Try Again", it does no good)
I don't know who generates this page. Mine is the only computer in the hotel with this problem. I have contacted the web owners via phone who only give me a temporary fix; next time I am there the same problem occurs. I can not find the help menu they reference to report the problem. I'm learning what SSL means, but don't know if I can adjust my security to accept this web site. So far, this is the only place in the world I have problems with this computer and using Firefox. I understand that this may not be a Firefox problem, but any help would be appreciated. I'm rapidly running out of ideas. Thanks, Rick

First, I agree with Karol, use the AUR so that pacman can do its job. Second, when you do your make, there is no reason to run it as root (until you do the make install) For the initial build, it is much safer to not use root; plus all the files in your home directory will continue to belong to use, not to root.
But, try the AUR.

Having problem installing Adobe Extension Manager 6.0.7 update. Received Error Code U44M1P7.Help?

I am having a problem installing Adobe Extension Manager 6.0.7 update. Received Error Code: U44M1P7. Help?
Thank you for your assistences.

Dreamachiever2 please see Installation failed. Error U44M1P7 | Updates - http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html for information on how to resolve your current difficulties.

How do I override "error code -61" when attempting to put things in the Trash? Cannot empty Trash or use Secure Empty Trash.

How do I override "error code -61" when attempting to put items in the Trash? Cannot empty Trash or use Secure Empty Trash. I have a MacBook OS X 10.5.8

The reason why some of the files are blocking the trash from emptying is because of specific ".app" files from third party companies like Adobe products. Not the user files or the various help documents but instead the actual mother program. Here's how to fix this problem:
1) remove from the trash all the actual software programs like Photoshop, InDesign, DreamWeaver and so on and put them on the desktop.
2) Command "I" (info) and when the dialog box opens go to the "Name & Extension" text box and remove the ".app" from the software name. Example: Photoshop.app change to Photoshop.
3) the program icon will change to a "folder icon".
4) put the folder icon back into the trash and you should be able to now empty the trash.
If you continue to get the error code 8003 it's because you may still have one or more software programs in the trash that needs to go through this process. Remember - it's not the user files or help documents or supporting files that is causing this but instead the "actual product programs".
JKai

TS3694 i was updating my iphone to 6.1.3 and received error code 6 would some help me with this error

im updating my iphone 4 to the latest update and received error code 6 would someone tell me what is this?

Hello, Joyce.
Error 6 can be tricky. It usually is related to a 3rd party software conflict like security software or a modification of your TCP/IP protocol. It the article that you referenced, iTunes: Specific update-and-restore error messages and advanced troubleshooting, see the section labeled "Errors related to third-party security software". Go ahead and try the first two of that section. If that does not work an uninstall of your antivirus software or attempting to restore on a new computer might be necessary. I have included the links to those steps below.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
iTunes: Troubleshooting security software issues
http://support.apple.com/kb/TS3125
Cheers,
Jason H.

On Adobe Acrobat Pro X "I received error code 2148073483 when trying to sign my documents. I am using Windows 8.2"

Using Adobe Acrobat Pro X I received error code 2148073483 when trying to sign my documents. I am using Windows 8.2.

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Receiving error code 0x61000016

Printer will not print receiving error code 0x61000016

Hello tennis14,
Welcome to the HP Support forums. I understand that you are getting error code 0x61000016 on the display panel of your HP printer.
To better assist you, would you please provide some additional information:
What make/model/product number of HP printer do you have? Guide to finding your product number
How is the printer connected (USB cable, ethernet, or wireless)?
What operating system is running on your computer (Windows 7, Mac 10.8, or Windows 8, etc)?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

While downloading mandatory update, I received error code 16820

While downloading mandatory update, I received error code 16820. What is this? How can I receive the mandatory updates?

ZapKat please see A12E1 error installing Creative Cloud products | CC - http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html for information on how to resolve the A12E1 error.

HT201210 My ipod has received error code (9). I have tried to restore, but failed. Any idea how to restore back to original settings?

My ipod has received error code (9). I have tried to restore, but failed. Any idea how to restore back to original settings?

Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
http://support.apple.com/kb/TS3694#error9

I receive Error code: ssl_error_bad_mac_read on secure Blackboard website (online school work)? I am on a Mac and using FF version 3.6.12? It's starting to interfere with my work please help!

Similar Messages

Maybe you are looking for