I receive error messages when I am downloading free iphone apps. I get error message 9810 and 9834. Can anyone advise how to resolve this problem?
I receive error messages when I am downloading free iphone apps. I get error message 9810 and 9834. Can anyone advise how to resolve this problem? The problem doesn't exist when I'm downloading apps for which I pay.
Hi,
See Here:
http://support.apple.com/kb/TS1276
From Here:
http://support.apple.com/kb/TS1424
Similar Messages
-
Wanting to connect an older G4 Powerbook running OS 10.4.11 to a Marantz SR4023 receiver amplifier with only RCA inputs to play iTunes through it on stereo speakers. Can anyone advise how to do this? Not tech savvy at all here, and will be happy with a simple hard wired connection. The Powerbook is old, and I no longer want to use it for anything but connecting iTunes radio, and my iTunes library to my stereo system.
Hi,
There were many PowerBook G4 models (http://support.apple.com/kb/HT3065) with different ports (http://support.apple.com/kb/ht2369).
If necessary, a manual can be found here:
http://support.apple.com/manuals/#PowerBook%20G4
Generally speaking, the output of a headphone port can often be used for the connection to an amplifier. You would need an appropriate cable (typically, 3.5 mm stereo plug to two RCA plugs). Choose a suitable amplifier input (high level). Do verify the allowed amplifier input voltage levels and the impedance before you connect.
Jan -
My daughter has an iphone 5s and I have her old 3GS. She receives all my imessages that I rcv or send to other people. Can anyone advise how to stop this? we have removed the 3gs from her itunes account but it hasn't stopped the issue.
There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon. -
I have used Outlook since it came out and am using it on new Macbook Air. Today, I started getting this message.
thank you!
GaryIt sounds to me like some of the addressees in an email message you're tryijng to send are not legitimate. Perhaps you're trying to use Apple's Contacts address book instead of Outlook's. Check each outgoing address in the message.
-
Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?
Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater -
I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please
Try reentering the password in your iCloud mail settings.
-
HT204053 I updated to I0S6 but when I go to update my apps I get error message that I need IOS5
I updated to I0S6 but when I go to update my apps I get error message that I need IOS5! Why am I getting that message after already updating to IOS6?
The Apps are probably a bit behind and have not been updated to work with iOS6 yet.
-
Hi
I am having problems sending emails when using my ipod touch with wi-fi abroad. When at home my ipod touch receives and I can send emails through my home wi-fi system but when away and logged into other wi-fi networkcan only receive emails and not send them. Internet access is fine when abroad.
I am assuming that this is to do with the outgoing server but this is only a guess!
I am not very techy so any ideas how to resolve this problem would be gratefully received.
Thanks
KeithGHSeems like the other networks are blocking you from sending emails.
Do yo have more that one email account on the iPod?
Have you tried sending from another account? -
While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour. -
My wifi works fine and I can access the store fine, but when I try to install an app, I get the message "cannot connect to iTunes store"
I am guessing there is an issue with the store right now considering so many people are having the same problem on different platforms. I can't access it with my iPod Touch 4th Gen, yet my wifi is working and I can access the internet using other apps, but when I go to update a couple of apps from the iPod, I get the same error message after I try to sign in to the store.
-
My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?And all the sounds on my phone are on, even the keyboard clicks.
Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo, double check the volume button just in case. If you still can't hear the tones go into your settings>sounds and make sure the options are on.
-
I downloaded a ringdown direct from itunes to my iphone 4S. When I go to settings/sounds/ringtone, the new ringtone is not there! I have downloaded it twice, but still not there. Does anyone know how to resolve this?
Thanks, your advice prompted me to look at it again on itunes, and discovered that i have actually downloaded the full song instead of the ringtone. False alarm...and thank you!
-
I have a Canon MG6120 all in one. When I start it I get error code 5050. Does anyone know how to resolve this, besides power off/ power on?
Solved!
Go to Solution.Hello gregg.
Please try the following to see if we can resolve your issue:
1. Turn the printer off.
2. Unplug the power from the printer for at least 5-10 minutes.
3. While unplugged, remove any paper from the unit.
4. Double check for any obstructions found in the unit or paper paths.
5. If no obstructions are found, plug the power back in and turn the unit on.
If the issue persists, the unit will require service for correction. We apologize for this inconvenience. Please contact our support group using the "Contact Us" option below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
When i click on a song to play or drag it to a playlist an exclaimation mark appears next to it. a message says , could not be used because the original file could not be found. does anyone know how to fix this problem?
1. delete this songs from your liblary
2. go File -> Add File to Liblary... (Ctrl+O) or File -> Add Folder to Liblary -
When I try to update my apps I get a message saying - your
account is not valid for use in Pakistani store . How do I change
this ?See this support document. http://support.apple.com/kb/HT1311
Maybe you are looking for
-
Pricing date and billing date in va01 transaction
Dear all, step 1: we have sales order of order type IEL1 in our sap system step 2: then we do have order type IELB which is called billing request . this is created in va01 transaction against IEL1 sales order type. now here billing document is cre
-
Messages will not open on iOS 7 with iPhone 4
Just upgraded to iOS 7 on an iPhone 4. Is anyone else unable to open the Messages app. Tap and the app comes up as if its going to start to load in my coversations, but then after about 5-10 seconds it just closes.
-
ALV Block list report FILTERING
Hello All, I am Working on ALV Block List Report. In that report i am having two Blocks. if i set a filter for one block it is filtering that block. My requirment is like this if iam setting a filter for one block, in the second block also have the s
-
BAM Data Control - Group query with Active Data Service
Trying to get a group query from a BAM data control to work with Active Data Service in an ADF application (JDeveloper 11.1.1.4.0). With a flat query, as the data changes, I can see DataChangeEvents fired, resulting in a data push to the client - <BA
-
I pod touch 5th generation was working fine (Not sure what the last ios i downloaded was it should be ios 8 or higher). The battery died so i charged it. Now that it is charged when i hold the power button the screen turns dark blue as if it's poweri