I receive my "talktalk" e-mail OK but cannot send mail?

I receive my "talktalk" e-mail OK but cannot send mail?

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Similar Messages

  • N8: can receive mail (IMAP), but cannot send mail ...

    LS
    Bought a new N8 yesterday. Configured the email (XS4All.nl) using the secure settings provided by the ISP.
    IMAP works just fine, however SMTPS does not; it is impossible to send emails.
    N8 was updated first to latest firmware version.
    Within the outgoing mail settings the SMTPS mailserver requires SSL on port 465; however after putting in manually 465 as portnumber, closing the application, and opening the application again, going to the outgoing mailsettings, the port says "standard" again . In other words the manual input of portnumber 465 does not seem to be saved by the system.
    This could be the reason for not being able to send mail, as the standard port will not work.
    How can I be certain that manually typed settings are saved by the system (and be able to check that), as in this case the system seems to revert to its standard settings automatically?
    My previous Nokia 5800 had no issues at all with the account settings of the same emailbox and worked flawlessly.
    Thank you for your attention (and hopefully fedback on how to solve this issue).
    Kind regards,
    Lia
    Solved!
    Go to Solution.

    Removal of email box, re-start of device, configuring "new" email box did not solve the issue.
    All outgoing messages stay in the Outbox......
    Anyone....notably someone from NOKIA (afterall it is their product.....),
    regards,
    Lia

  • Able to receive mail in but cannot send mail out

    Have followed all instructions setting up Orange mail and entered details for both incoming and outgoing servers.
    Mail comes  in OK but when I reply or write a new email I receive a message:
    " A copy has been placed in your outbox. The recipient xxxxxxx was rejected by the server because it does not allow relaying"
    xxxxx is the mail addres I want to send to, however it's all email addresses I want to send to, not just one specific address.
    How can I overcome this please?

    So into Setting for the email account on your iPad.  Go to advanced settings and make sure SSL is on.  See if that works. Some accounts may have off.  This works in hotmail which is a POP3 account.

  • I can receive emails on laptop via bluethooth but cannot send, outlook  is what i am using

    I can receive emails on laptop via bluethooth but cannot send. I am using outlook

    Bluetooth is not a protocol used for sending and receiving email.
    Please clarify your question.

  • Have downloaded Yosemite and lost my outgoing mail settings in the process. I can still receive email from all my mail accounts but cannot send any...

    I have downloaded Yosemite but lost my outgoing mail settings in the process. I can still receive mail from all my accounts but cannot send any...

    Open mail
    click on mail  on top
    click preferences
    click accounts tab
    scroll down to TLS Certificate
    click up & down arrow and select  (com.apple.idms.appleid  )
    It worked for me

  • I can receive mail on my bellsouth account on my iPad, but cannot send mail

    Why is it I can receive email, but cannot send? My account is with Bellsouth.net

    Hello, sounds like you haven't switched to iCloud yet, the old dot Mac & MobileMe servers are going away or gone for most already.
    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
    • Server name: imap.mail.me.com
    • SSL Required: Yes
    • Port: 993
    • Username: [email protected] (use your @me.com address from your iCloud account)
    • Password: Your iCloud password
    SMTP (outgoing mail server) information:
    • Server name: smtp.mail.me.com
    • SSL Required: Yes
    • Port: 587
    • SMTP Authentication Required: Yes
    • Username: [email protected] (use your @me.com address from your iCloud account)
    • Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • IPad receives mail just fine, but cannot send mail

    I am using a POP3 server with shaw (the server for both incoming and outgoing mail is shawmail.vc.shawcable.net) and, as stated in the title, my iPad will not send any mail. It refuses to interact with the SMTP server. It says "Cannot Send Mail    The connection to the outgoing server "shawmail.vc.shawcable.net" failed. Additional Outgoing Mail Servers can be configured in Settings > Mail, Contacts Calendars."
    I have already tried everything that I have found already suggested on these forums and others, including inputting both a username and password for the SMTP server, changing the port to 25, and restarting my iPad after each of these changes. All of the settings on the iPad match those on my mail program perfectly (which works without a hitch, and has been for some time now.) I am connected by Wi-Fi to my home network, the exact same router I use to get my mail on my personal computer.
    One other detail: whenever I change the settings for the SMTP server in Settings > Mail, Contacts, Calendars, it says that the SMTP server does not support password verification, which is just plain untrue. What is wrong with my iPad?

    What did your email provider, Shaw, say or suggest about settings needed for the iPad?

  • I have an iphone4. i can receive mail however, i cannot send mail. my internest provider is ntl.

    I have an iphone 4.  I can receive emials, however, i cannot send mail. my service provider is ntl. everything seems to be set up correctly.
    any ideas?

    INCOMING MAIL
    Account type                           POP
    Description                              Hotmail
    Incoming server Hostname     pop.3.live.com
    User name                              (My hotmail address)
    Password                                (my password)
    Incoming port number             995
    Incoming server port authen.  Password
    Incoiming server supports       SSL
    OUTGOING MAIL
    Outgoing mail server                     smtp.live.com
    Outgoing server port                     587 (SMTP)
    Outgoing server supports (SSL)   Yes
    Outgoing server authentication    Password  (I try the same password as incoming however it does not accept this)

  • Can receive mail, but cannot send mail.

    I am able to receive mail, but unable to send mail. I went to the apple store and was able to send and receive mail while in the store.
    Any help will be appreciated.

    Hope you have your install discs as you will need them, if you do no problems. If not you will have to call Aple to get replacements, as the discs are machine build depedent.
    http://support.apple.com/kb/PH6439

  • Receive mail but cannot send mail. Any ideas?

    I have iPad2, email set up to receive and send mail. pop...for receive and smtp... for send. port 110. I can receive but not send. Can anyone help?

    Check with your email service and find out which ports can be used with their SMTP and then try that port. 

  • I cannot send mail   but I receive mail why, I cannot send mail   but I receive mail why

    How do I send mail   I recieve mail

    also which browser? for example with yahoo mail i can receive and send with safari and tenfourfox but i can only receive with firefox.

  • Can get incoming mail but cannot send mail

    Can get incoming mail but not send mail

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • I have no trouble receiving mail on my iPad 2 but cannot send mail.

    I have turned on all the SMTP servers and re-booted the device but can't send outbound mail.  Oddly though, I can send outbound mail using QuickOffice.
    Does anyone have suggestions?
    Thanks

    Hi ...
    Try here >  iOS: Unable to send or receive email

  • Receive but cannot send mail with air book lions

    mail says offline in pref. can receive and NOT send.  Is working fine on PC

    Most email providers use separate servers for incoming (POP3 generally) and outgoing (SMTP generally) mail.
    Chances are you don't have the SMTP server info.  Google for the smtp server of your ISP/region. 
    Another possibility is that your ISP blocks SMTP sending if you are not at home, or outside their network (say on wifi somewhere else).  This is done to prevent spamming by people that hack email address passwords.

  • I can receive a text from a contact but cannot send to them- both are iPhone with IOS 7

    I can receive a text from one of my contacts but when I send a text back, the text is not delivered.  We both have updated iPhone 4s phones.  Neither of us is blocking and we were able to text both ways until one of us made some changes due to a son's iPod being added -then tried to change back- still doesn't work.  Any suggestions?

    Hi sailsurf21,
    Thanks for using Apple Support Communities.  This article has some steps that may help troubleshoot issues sending messages on your iPhone and receiving messages on theirs:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Cheers,
    - Ari

Maybe you are looking for

  • Not allow order unit in INFO record if it is not in material master

    Hello there! In standar SAP any user can introduce any order unit in the info record, even if it is not maintained in the material master alternative units of meassure. We need to block this... The conversion factor is not a problem for us, as we can

  • How to get Camera Raw 6.7 to work in Bridge CS5?

    I've read past posts about the ways to fix this problem, but they don't work for me.  I'm using a pc with windows 8.1.  I've downloaded and installed Camera Raw 6.7 update and when I select "Help, Update" in Bridge, it says I have the latest updates

  • Should I save as TIFF or PSD?

    Hello, I have been going 'round in circles trying to decide whether to set my Lightroom external editing pref's for Photoshop as PSD or TIFF. I've very recently downloaded Photoshop - I'll be using it after I've done what I can in Lightroom, just for

  • Photoshop Elements 2.0 Help Please!

    I just installed Photoshop Elements 2.0 and when I go to open it I get an error message saying that the program "Could not initialize Photoshop Elements because the scratch disks are full. This is definately NOT because of my computer's processing po

  • Backing up your mac to external drive and how to access individual files

    I have managed to back up the information on my computer to a external drive as a whole but need to access different files, projects so that i can then delete them from my computer to save space. how do I access the different files on my external dri