I receive Not Found errors after installing Edge 2.0

im facing the same difficulty but im using a PC
i had uninstalled edge 1.0
and this is qht i get when im installing the 2.0 version-
please help me... !!!!

In my case I finally found that I needed to uninstall the beta version (Adobe Edge Preview) using the uninstaller that came with it before I could install the regular version. I didn't even know it was there until I did a search and finally found the un-install utility.
I found the answer by doing the same thing you are doing and searching the forums for help in getting rid of Edge Preview.
Sorry I can't be of more help...

Similar Messages

"Apple page not found" error after installing iOS 6 and trying to connect to wifi on iPad 2, how do I fix this?

SO I just installed the new iOS6, and the wifi is working (posting on my iPad 2 right now). However it won't let me use safari, and every time I select my wifi network, it shows the full strength signal. But before I can do anything it loads a page in an attempt to connect to apple.com, that says "apple page not found." I can then navigate the apple website, but there is no address bar. I try using safari and it says I am not connected to a wireless network. I know this is a problem with iOS 6, so has anyone heard how to fix this? Or is anyone having this problem as well?

Reading some older threads from 2012 and 2011 it appears the problem was present even then. Part of the problem was due to people using multiple or different account id's on the various devices. In my case, I only have one ID and it is the same on all devices yet the iPhone and iPad are still throwing the same error when I try turning on iTunes Match. This is very frustrating . . . any help out there? Thanks.

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

"Page not found" error after 5 minutes of see "processing" on the screen

We are using WebLogic 8.1 server and also the WebLogic proxy as our front end. When a user runs a process that takes over 5 minutes using the Proxy URL they receive an IE "Page not found" error after 5 minutes of seeing "processing" on the screen. If they run it on none Proxy URL (directly on WebLogic server) it works fine.
We have looked into the WLIOTimeoutSecs parameter and set in the web.xml for both the HttpClusterServlet and HttpProxyServlet, but this had no affect.
Is there another timeout that controls this 5 minute timeout? It seems if one uses Apache and sets the WLIOTimeoutSecs parameter to a higher number than 300 seconds there is not an issue.
Did this parameter get omitted for the WebLogic Proxy and if so, what does one use?
Thanks,
Jim

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
Kernel parameter: rdisp/gui_auto_logout
Kernel parameter: rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

'CRT not initialized' error after installing MS Office 2010

Hi,
I encountered 'CRT not initialized error' after installing MS Office 2010. I think that with previous version of CVI there were no problems. But, with Labwindows/CVI 2012 error has outbroken. The details are as follows.
- OS : windows 7 Enterprise (32bit)
- Labwindows/CVI (v12.0.0 (422))
- MS Office 2010 (word, powerpoint, excel)
#1. clean install windows 7 (32 bit)
#2. install Labwindows/CVI v12.0.0 and device drivers (DAQ, Motion)
#3. compile and run attached test program : SUCCESS
#4. online update windows 7 (service pack, explorer 9, and etc)
#5. compile and run attached test program : SUCCESS
#6. install MS Office 2010
#7. compile and run attached test program : 'CRT error'
#8. uninstall MS Office 2010
#9. compile and run attached test program : SUCCESS
I think there are some conflicts between office 2010 and labwindows v12.0.0. How can I solve this problem?
Thank you in advance.
Attachments:
step7-CRT error.jpg ‏31 KB
test program.zip ‏3305 KB

More specifically, I decided that some parts of MS Office files and features of NI's motion library conflicts. Because in the attacted sample program, if I exclude NI-Motion functions then the program excutes nicely. But if I include NI-Motion fucntion, for example flex_select_signal, then the 'CRT not initialized' error occurs.
To solve this problem I tried step by step installation check for MS Office 2010. During each step I included more optional features in MS Office and after each installation I compiled and executed my sample program. At finally, I found that the addtional part of MS Office 2010, if I install Office Sharing Function>Microsoft IME(Korean), then the 'CRT not initialized' error occurs.
Temporarly, I solved the problem with NOT installing 'Office Sharing Function>Microsoft IME(Korean)' optional feature in the MS Office 2010.
Could you tell me why this problem occur?

File not found error after log on to ADF application

Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.

Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.

File not found error after database migration

Hi experts
I recently decided to create a test environment for SharePoint 2010 production server but after
attach the content database using power shell successfully I get “ file not found “ error when I try to login the top site collection
I think it’s because of customized master page in production site which I don’t know how to apply them to my new environment.I even tried to copy the master pages from cataloge throught SPD but it didnt work.
Any assistance would be greatly appreciated

HI Shahin,please try to access the site by below and let me know the result.please check the below link that gives more idea on the issue
_/_layouts/settings.aspx
/_layouts/viewlsts.aspx
/default.aspx
http://expertsharepoint.blogspot.de/2014/01/sharepoint-default-page-not-loading-by.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

FILE NOT FOUND ERROR WHILE INSTALLING ORACLE EM GRID CONTROL 10.2.0.1

FILE NOT FOUND ERROR ON FILES: generalstup, seedstup during the setup phase and when i click ignore from a list of cancel, retry and ignore it moves to the configuration phase and rapidly moves from 63% to 100% and gives the error OUI-10133 invalid staging area. i have tried the install 3 times and dont know what the problem is. i am doing the oracle EM GC INSTALL WITH NEW DATABASE OPTION. i downloaded the full version disks 1-3 from the website:http://www.oracle.com/technology/software/products/oem/index.html
Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
Full Installers (Agent, Repository, OMS, and Management Packs)
Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1) for Linux x86
when this is extracted it leaves me with Disk1, 2, and 3
install started from 1, then it later asks for two whick happens to instead be but under Dist 3-but there are two disk2's under Disk 3- one under oms and one under rdbms folder. i have tried both and alas same errors
i even triwd the same download from edelivery.oracle.com and gives the same madness
am stuck.

i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
error reads :
-error cheching the existence of the SYSMAN user in Management repository
-exception occured while connecting to database . please check the connection details you specified and retry
-io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
REP DB HOSTNAME:SA-OMS-01
PORT:1521
SERVICE/SID:OMSDB01
SYSMAN PASSWORD:PASS
THE REST I PUT PASS AS PASSWORD
NOT SURE WHAT TO DO NEXT.

"File Not Found" Error after Restoring Sharepoint List

Hello,
I restored a Sharepoint List via Powershell and all seemed to work fine. The Import-Log sais 0 Warnings and 0 Errors.
When I access the List now i can see all the Items, but when i click a Item to access it, i get a "File Not Found"-Error.
May the Alternate Access Mappings be the Problem? The List is restored from another Sharepoint-Farm that was accessed by different URLs.
What can i do to access the Items? Thanks for your help!

How was this list moved? Using export-import? Do you still have the old list in the old environment? Can you turn off dialogs on the list so that we can tell where exactly it is navigating to? Can you also install fiddler to see the web hops?
Pranav Sharma
SharePoint Consultant, Portal Solutions

404 page not found error after upgrade to 4.0 from 3.x

We developed this application in 1.6 and a couple years ago upgraded to 3.2. We've just upgraded the Production version to 4.0.0 (that's what was on the Dev box). I understand that the template we used when developing it is now obsolete and I added some stuff to make it work properly (found tips here). In Dev it seemed to work correctly but now that it's in production we're getting a 404 Page not found error which "seems" to only occur after a search returns some results and you change the search criteria and try to rerun the search with this modified criteria without first leaving that page (if you click to a different tab and back before changing the search criteria you don't get the error). It doesn't matter which criteria field you change (date, text, LOV) the error comes up consistently. The criteria is submitted via a button (Go request). It's a PL/SQL function body returning SQL query. The only processes that are run is a Reset Pagination on the Go request.
Is there some quick setting that can be changed that causes this? Or something in 4.0 that is different that I need to change when submitting a page, etc... I can't see anything in the debug & all the variables do have appropriate values.

A column in the search results was changed to a Simple Checkbox when we upgraded to 4.0 (it has always been a checkbox in the older APEX versions). When I put it back to Standard Report Column I no longer get the page not found error.
Is there some additional/different setting I need to do in order to use the simple checkbox option in a search results set?
ETA: I see now that Checkboxes are not intended to work in standard report regions so I'll change them to LOVs or something and my problem should be solved.
Edited by: mimi_jones on Jul 18, 2011 6:16 AM

Page not found error after logging into oiddas

Hi all,
I have configured reverse proxy setup for my application server. from external portal is accessible( with proxy hostname externally and internally after login from internet) and also sso server administration site (same as portal ) but when i am trying to access oiddas page i am not able to login and i am getting page not found error. for ssocfg.sh i have given proxyHostName and proxyPort with https and i can see external name and it is redirected with external name for sso authentication but when i logged in i am getting page not found with http 404 msg and i have followed many docs in metalink w.r.t this error but couldn't resolve after too many trials and registrations. could someone help me on this. let me know if you need any information my internal address is http://localhost.localdomain.com:7777/ external(proxy)- https://portal.localdomain.com/
Thanks

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
Kernel parameter: rdisp/gui_auto_logout
Kernel parameter: rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

Page Not Found Error after Installation

I just installed coldfusion 7. For some reason the flash
remoting did not get installed or enabled. Everything appears to
say it installs by default. Go to
http://localhost/flashservices/gateway.
I get a page not found error and it shoots to
http://localhost/flashservices/.
Did I miss a step somewhere?
I installed on a Windows XP box with IIS under the
C:\Inetpub\wwwroot. Is there something I can check or do? I am
pulling my hair out over this. Please help.
Thanks in advance.

Better use BASIC installation type. If you go for advance installation you have to very carefull selecting all the key parameters. Are you looking for more specific ?? then can you please tell us the purpose of choosing advance installation type.
Regards
Rajesh

"Page Not Found" Error after arnd 5 mins of processing on SAP Trans iView

Hello All,
We are facing an issue related to a SAP Transaction iView on our portal.
This transaction is supposed to upload an excel file in RPM and provide a log after the upload is performed. We are trying to upload around 180 projects and the processing goes on in the backend. The program in the backend works as required, but as the iView shows a page not found after around 5-6 mins of processing, the users cannot see the logs in the end!
I suppose there should be some kind of time-out parameter for the Transaction type iView, but we are not able to figure it out!!
We have tried the following parameters without success:
icm/server_port_0     = PROT=HTTP, PORT=8035, TIMEOUT=3600, PROCTIMEOUT=3600
icm/keep_alive_timeout (sec.) = 3600
icm/conn_timeout                = 5000
rdisp/plugin_auto_logout       = 1800
Please do suggest if there is anything else that we need to update to get this process to continue on the Portal and avoid the 'Page Not Found' issue.
Thank you for your time!
Regards,
Gaurav

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
    Kernel parameter:    rdisp/gui_auto_logout
    Kernel parameter:    rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

404 Not Found Error after 5.2 SP04 Patch04 deployment

Hi,
Today I did an installation and deployment of the 5.2 SP04 Patch 04 to one of our standalone
SAP ME Application Servers. The installation and deployment worked without any error.
However afterwards I could not login to SAP ME on the patched server.
I get a 404 Not found error page after entering my site, login and password. The page I am being redirected
to is http://<appserver>:50000/manufacturing/j_security_check?VALIDATE=true
The real funny thing started right after when I discovered that my other SAP ME Application Server (Which has
not been patched and is on 5.2 SP04 Patch03) started showing the same error message.
Anybody has an idea on what is going on?
Br,
Johan Nordebrink

Hi,
Yes both my SAP ME Database servers (WIP and ODS) are up and running.
After restaring my patched server this morning I found that before I get the 404 error during login I get a
message saying License file corrupted 11904.
On my other application server I don't get license file corrupted. There I get the 404 error but when I try to login again right after I am already logged in to SAP ME and can run the application.
This is the last default trace messages from my patched application server since this mornings restart:
#2.0 #2010 10 08 08:24:06:035#+0200#Warning#com.sap.engine.core.service630.container.ReferenceResolver#
com.sap.ASJ.krn_srv.000064#BC-JAS-EJB#sap.com/ejbormapping_api#1CC1DE01D044000000000006000006EC###com.sap.engine.core.service630.container.ReferenceResolver########Thread[main,5,main]#Plain##
Interface [ejbormapping] without declared provider#
#2.0 #2010 10 08 08:24:06:035#+0200#Warning#com.sap.engine.core.service630.container.ReferenceResolver#
com.sap.ASJ.krn_srv.000064#BC-JAS-EJB#sap.com/ejblocking_api#1CC1DE01D044000000000007000006EC###com.sap.engine.core.service630.container.ReferenceResolver########Thread[main,5,main]#Plain##
Interface [ejblocking] without declared provider#
#2.0 #2010 10 08 08:24:06:035#+0200#Warning#com.sap.engine.core.service630.container.ReferenceResolver#
com.sap.ASJ.krn_srv.000064#BC-JAS-ADM-MON#sap.com/dsr_ejbcontext_api#1CC1DE01D044000000000008000006EC###com.sap.engine.core.service630.container.ReferenceResolver########Thread[main,5,main]#Plain##
Interface [dsr_ejbcontext_api] without declared provider#
#2.0 #2010 10 08 08:24:06:035#+0200#Warning#com.sap.engine.core.service630.container.ReferenceResolver#
com.sap.ASJ.krn_srv.000064#BC-JAS-ADM-ADM#sap.com/visual_administration_api#1CC1DE01D044000000000009000006EC###com.sap.engine.core.service630.container.ReferenceResolver########Thread[main,5,main]#Plain##
Interface [visual_administration] without declared provider#
#2.0 #2010 10 08 08:24:24:159#+0200#Warning#com.sap.engine.services.deploy#
com.sap.ASJ-dpl.ds-000463#BC-JAS-DPL#deploy#1CC1DE01D044000300000000000006EC#1674450000000118##com.sap.engine.services.deploy#####aeb67914d2a411dfad841cc1de01d044##0#Service Runner [tcjecachemgmt~srv]#Plain##
Warnings:
   The Cache Configuration Upload container reports that doesn't support parallel operations, which slows down the deploy, update and remove operations with applications.
Solution: Please contact the container holder to fix these warnings.#
#2.0 #2010 10 08 08:24:39:112#+0200#Error#com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract#
#BC-ESI-WS-JAV#tcesiespsrv#1CC1DE01D044000B00000000000006EC#1674450000000768##com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract####AEB67914D2A411DFAD841CC1DE01D044#aeb67914d2a411dfad841cc1de01d044#aeb67914d2a411dfad841cc1de01d044#0#Service Runner [tcesiespsrv]#Plain##
There is problem reading the hostname from the ClusterManager. This could lead to improper wsdl links.#
#2.0 #2010 10 08 08:24:43:753#+0200#Info#com.sap.archtech.daservice#
#BC-ILM-DAS#sap.com/tcTechSrvXML_DAS#1CC1DE01D044001000000002000006EC#1674450000000042#sap.com/tcTechSrvXML_DAS#com.sap.archtech.daservice#Administrator#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [21]#Plain##
MasterMethod: An error occurred during the System Landscape Directory synchronization: Getting WBEMClient failed: com.sap.sldserv.exception.SldServiceRuntimeException: Destination SLD_Client not found. Destinations are defined in the Destination service.. Please check that destination SLD_Client is maintained correctly.
[EXCEPTION]
com.sap.sldserv.exception.SldServiceRuntimeException: Getting WBEMClient failed: com.sap.sldserv.exception.SldServiceRuntimeException: Destination SLD_Client not found. Destinations are defined in the Destination service.. Please check that destination SLD_Client is maintained correctly.
     at com.sap.sldserv.SldApplicationService.getWbemClient(SldApplicationService.java:150)
     at com.sap.archtech.daservice.commands.MasterMethod.synchronizeSystemLandscapeDirectory(MasterMethod.java:428)
     at com.sap.archtech.daservice.DASmain.init(DASmain.java:188)
     at javax.servlet.GenericServlet.init(GenericServlet.java:270)
     at com.sap.engine.services.servlets_jsp.server.security.PrivilegedActionImpl.run(PrivilegedActionImpl.java:97)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:396)
     at com.sap.engine.services.servlets_jsp.server.application.WebComponents.addServlet(WebComponents.java:336)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:977)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:288)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:212)
Caused by: com.sap.sldserv.exception.SldServiceRuntimeException: Destination SLD_Client not found. Destinations are defined in the Destination service.
     at com.sap.sldserv.SldApplicationService.getWbemClient(SldApplicationService.java:105)
     ... 13 more
#2.0 #2010 10 08 08:25:00:472#+0200#Warning#com.sap.engine.services.deploy#
com.sap.ASJ.dpl_ds.000554#BC-XI-IS-WKB#sap.com/com.sap.xi.mdt.soa#1CC1DE01D044001200000055000006EC#1674450000000001##com.sap.engine.services.deploy####BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Deploy Parallel Start Thread#Plain##
Global operation [startApp] over [application] [sap.com/com.sap.xi.mdt.soa] finished successfully for [578]ms on server [1674450
>>> Warnings <<<
     1). Application sap.com/com.sap.xi.rwb is not deployed, but resolving of application sap.com/com.sap.xi.mdt.soa continues because it has weak reference to this application.]#
#2.0 #2010 10 08 08:25:01:144#+0200#Error#System.err#
#BC-JAS-WEB-JSF#ecjavajsf#1CC1DE01D044001600000000000006EC#1674450000000984#sap.com/xapps~ra.edm.prjmgmt.jee.app#System.err#Guest#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [18]#Plain##
Oct 8, 2010 8:25:01 AM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing JSF 1.2_08 for context '/EDMProjectWEB'
#2.0 #2010 10 08 08:25:02:237#+0200#Error#com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet#
#BC-JAS-ADM#sap.com/tclmitsamuicontentmodelear#1CC1DE01D044001700000000000006EC#1674450000001041#sap.com/tclmitsamuicontentmodelear#com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet#Guest#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [21]#Plain##
SAP_NWA_READONLY group does not exist
[EXCEPTION]
com.sap.security.api.NoSuchGroupException: Group "SAP_NWA_READONLY" does not exist.
     at com.sap.security.core.imp.GroupFactory.getGroupByUniqueName(GroupFactory.java:1429)
     at com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet.init(RoleToGroupMappingServlet.java:82)
     at javax.servlet.GenericServlet.init(GenericServlet.java:270)
     at com.sap.engine.services.servlets_jsp.server.application.WebComponents.addServlet(WebComponents.java:324)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:977)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:288)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:280)
#2.0 #2010 10 08 08:25:02:237#+0200#Error#com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet#
#BC-JAS-ADM#sap.com/tclmitsamuicontentmodelear#1CC1DE01D044001700000001000006EC#1674450000001041#sap.com/tclmitsamuicontentmodelear#com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet#Guest#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [21]#Plain##
SAP_NWA_FULL group does not exist
[EXCEPTION]
com.sap.security.api.NoSuchGroupException: Group "SAP_NWA_FULL" does not exist.
     at com.sap.security.core.imp.GroupFactory.getGroupByUniqueName(GroupFactory.java:1429)
     at com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet.init(RoleToGroupMappingServlet.java:99)
     at javax.servlet.GenericServlet.init(GenericServlet.java:270)
     at com.sap.engine.services.servlets_jsp.server.application.WebComponents.addServlet(WebComponents.java:324)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:977)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:288)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:280)
#2.0 #2010 10 08 08:25:14:987#+0200#Info#com.sap.me.trace#
##sap.com/meear#1CC1DE01D044001900000000000006EC#1674450000001163#sap.com/meear#com.sap.me.trace.VM#Guest#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [18]#Plain##
SAP Manufacturing Execution Base 5.2.4.4 11 112868#
#2.0 #2010 10 08 08:26:35:096#+0200#Error#com.sap.me.trace#
##sap.com/meear#1CC1DE01D044001A00000000000006EC#1674450000000004#sap.com/meear#com.sap.me.trace#Guest#0##AF1CFA4DD2A411DF9F991CC1DE01D044#af1cfa4dd2a411df9f991cc1de01d044#af1cfa4dd2a411df9f991cc1de01d044#0#Thread[HTTP Worker [@1499959050],5,Dedicated_Application_Thread]#Plain##
The Login ID is missing.#
#2.0 #2010 10 08 08:26:35:112#+0200#Error#com.sap.me.trace#
##sap.com/meear#1CC1DE01D044001A00000001000006EC#1674450000000004#sap.com/meear#com.sap.me.trace#Guest#0##AF1CFA4DD2A411DF9F991CC1DE01D044#af1cfa4dd2a411df9f991cc1de01d044#af1cfa4dd2a411df9f991cc1de01d044#0#Thread[HTTP Worker [@1499959050],5,Dedicated_Application_Thread]#Plain##
Login module exception. com.sap.me.frame.security.loginmodules.common.MfgLoginException: null#
Br,
Johan

Error "Error ERR-1014 Application not found. " after Installing APEX 40

Hello,
i have installed apex 4 to an existing apex 3.2 installation (oracle 11g windows) with oracle http Server.
i follow the installations guide and install the full version.
I try to call "http://dmsapex:7777/pls/apex/apex_admin" and it works and i can admin my application and see my existing workspace
i try to call "http://dmsapex:7777/pls/apex/apex" and it does not work. i get follw error message in the browser (IE8):
-->
application=4500 workspace=10
Error ERR-1014 Application not found.
OK
<--
I search in several forums and find " convert runtime into fullversion". I have installed "@apexins SYSAUX SYSAUX TEMP /i/". I try "@apxdvins" but it does not work.
C:\oracle\oraweb\ohs\logs/error.log says:
[Wed Jul 14 16:11:31 2010] [alert] mod_plsql: DMS failure: NounGetRoot failed. Disabling DMS
[Wed Jul 14 16:11:32 2010] [alert] mod_plsql: DMS failure: NounGetRoot failed. Disabling DMS
[Wed Jul 14 16:11:32 2010] [notice] Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server configured -- resuming normal operations
[Wed Jul 14 16:11:32 2010] [notice] Server built: Apr 12 2007 00:25:24
[Wed Jul 14 16:11:32 2010] [notice] Parent: Created child process 3280
[Wed Jul 14 16:11:33 2010] [alert] mod_plsql: DMS failure: NounGetRoot failed. Disabling DMS
[Wed Jul 14 16:11:34 2010] [alert] mod_plsql: DMS failure: NounGetRoot failed. Disabling DMS
[Wed Jul 14 16:11:34 2010] [notice] Child 3280: Child process is running
[Wed Jul 14 16:11:34 2010] [notice] FastCGI: process manager initialized
[Wed Jul 14 16:11:34 2010] [notice] Child 3280: Acquired the start mutex.
[Wed Jul 14 16:11:34 2010] [notice] Child 3280: Starting 250 worker threads.
Have someone the same problem? Or does sombody knows a solution?
Thanks for help
CZI

Thanks mo**** . I executed @apxdvins from my extracted oracle directory using the followin procedure and it was working properly.
Start/Run
CMD
You need to change your directory to the directory where apxdvins.sql iis available. Mostly this is Apex extracted directory.
$ SQLPLUS/NOLOG
SQL> CONNECT SYS AS SYSDBA
@apxdvins
This will take some time.
If you want you can also do this extra steps in SQL mode:
shutdown
startup
alter user anonymous account unlock;
ALTER SESSION SET CURRENT_SCHEMA = APEX_040000;
Thanks and reards

I receive Not Found errors after installing Edge 2.0

Similar Messages

Maybe you are looking for