I receive System Disabled with code 68072590 after 3 failed attempts

I receive System Disabled with code 68072590 after 3 failed attempts
This question was solved.
View Solution.

AM try.
77950516
Use that code to go into the BIOS.
Disable all passwords that are enabled.
IF asked for the CURRENT password use that code.
IF asked for NEW password just hit enter.
If asked to VERIFY password just hit enter.
Save and exit.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Similar Messages

  • HT201401 I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?

    I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?

    If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.

  • TS3230 Why aren't Google and Yahoo loading in Safari with Maverics?  After several failed attempts, a "wireless diagnostics" zipped folder appeared on my desktop.  I'm using a macbook pro with OSX 10.9.2

    I updated to Maverics and now yahoo and google do not load in Safari - i get a "connot connect to server" warning.  other websites load just fine. 
    Also, after several attempts to access the aforementioned sites, a zipped file/folder appeared on my desktop titled "WirelessDiagnostics"
    What in the world is going on here?  I attached a screenshot of the zip file.

    Double-click anywhere in the line of text below on this page to select it, then copy it to the Clipboard by pressing the key combination command-C:
    www.google.com
    Launch the Network Utility application.
    Step 1
    Select the Lookup tab and paste into the address field (command-V). Press return. Post the output that appears below – the text, please, not a screenshot.
    Step 2
    Select the Ping tab and do the same. Please enter the same input as you did in Step 1. Don't use the output of Step 1 as input to Step 2.
    Important Note
    Some web browsers and mail clients will automatically convert a domain name such as "www.example.com" to a clickable URL, such as http://www.example.com. That will interfere with the test. If necessary, edit the input in the Network Utility window to remove any added characters.

  • HT4108 I have an iPhone4, used and locked to the UK network. I need to pay for the phone to be officially Unlocked. In the meantime we used it as a device to check emails and games etc.. We put a pass lock and after many failed attempts we forgot what it

    I have an iPhone4, used and locked to the UK network. I need to pay for the phone to be officially unlocked.
    In the meantime we used it as a device to check emails and games etc.. We put a pass lock and after many failed attempts we forgot what it is. Now the phone is Disabled and iTunes can not fix it since it can not update the Software without the phone being officially unlocked..
    any idea how to do this?
    Please advice

    gencml wrote:
    We put a pass lock and after many failed attempts we forgot what it is. Now the phone is Disabled and iTunes can not fix it since it can not update the Software without the phone being officially unlocked..
    any idea how to do this?
    Please advice
    You need to visit Apple Store, and show ownership proof in case of forgotton pass code.

  • My Itunes won't open after a failed attempt at upgrading.

    My ITunes won't open after a failed attempt at upgrading.  Keep getting the error message...Failed to start because MSVCR80.dll was not found.  I have tried uninstalling and reinstalling and notheing works.  Help!

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Use an alternative e-mail address after repeated failed attempts to send.

    My company uses a small e-mail server company that offers a lot of benefits, but occasionally goes down for a day or two. I would like to find a way to automatically use another e-mail address after several failed attempts to use this server.
    Thus, if everything is working right, my e-mail will use the regular server. However, if the original server is down, when my e-mail fails to send repeatedly using that server, I would like it to default to another server. Is there a way to configure this?
    Thank you.

    No, you can’t. .Mac’s SMTP server simply doesn’t allow sending from a non-.Mac address.
    Doesn’t your ISP include some POP or IMAP mail accounts with access to an SMTP server as part of the service? Such an SMTP server might be less restrictive.
    A Gmail account would allow you to use Gmail’s SMTP server. Instructions for setting up a Gmail account are provided here:
    http://mail.google.com/support/bin/answer.py?answer=13275
    After setting up the Gmail account in Mail and checking that it works, you can use Gmail's SMTP server to send from your other mail accounts as well:
    1. Log into your Gmail account on the web.
    2. Go to Settings > Accounts.
    3. Enable the addresses you want to be able to send from, and let Gmail validate them by verifying that you do indeed own them.
    4. For each mail account you want to send from using Gmail’s SMTP server, in Mail go to Preferences > Accounts, and choose Gmail’s SMTP server from the Outgoing Mail Server (SMTP) popup menu.
    BTW, if you’re using Mac OS X 10.3 (Panther), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Mac OS X 10.3 & earlier forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

  • ACS v5.1 - Can internal users be disabled after x failed attempts?

    I have noticed under authentication settings for internal user accounts there is no setting to disable the account after x number of failed attempts (ACS v5.1). This is such a fundamental requirement for user accounts that I am wondering whether I have missed something. (They include this option on Administration accounts)
    Does anyone know if can this be set somewhere else or is Cisco going to implement it in a later version?
    Many Thanks

    Hello jrabinow ,
    Thanks  a lot for the reply .
    We already have our AD setup to lock account of users who failed 3 consecutive windows login attempts .
    However when network administrators fail to login  after 3 consecutive attempts into a network device, they can still login into a network device if they provide their correct AD credentials .
    Is there any specific configuration that needs to be done on the AD to be aware of the failed login attempts on the network devices and count it the same as a failed windows login attempt ?!
    Kind Regards ,
    Moussa

  • V6 quiz report LMS as completed after 3 failed attempts

    I have a pure quiz in captivate 6 that allows the learner to take it 3 times only eg
    Attempt 1 = fail = report LMS incomplete
    Attempt 2 = fail = report LMS incomplete
    Attempt 3 = fail = report LMS incomplete
    What i need is not logical but.........
    I require the LMS to
    Attempt 1 = fail = report LMS incomplete
    Attempt 2 = fail = report LMS incomplete
    Attempt 3 = fail = report LMS complete
    Is this at all possible?
    Happy to try anything with instructions
    Thank you in advance and hope the above is clear enough
    Jo

    Hmm, very illogical indeed. Not consistent with normal SCORM behavior at all.
    Just  some ideas, without having checked them completely. You are using score or completion of slides as criterion? If it is the last option, make sure there are some slides to be viewed after the last attempt by using the Action on Fail that you'll find in the Quiz Preferences. I hope that is the case. But what if you have to report a score?
    Lilybiri

  • What is the default 4 digit factory security code on apple devices please ? is it 0000, 1111 ? i now have to wait 60 minutes to try again after 8 failed attempts. I dont believe i have set this code

    can someone help please? I am trying to do a factory restore. I have tried the reboot/plug in to laptop and do it through itunes method and i got a failed message saying there was a glitch with the phone. I have never set a 4 digit security code in the settings menu where I could reset the device. I assume that there is a factory set 4 digit password as I have now tried every number that I would have used if I had set it myself. They are usual 0000, 1111 or something similar.
    I really need this number to proceed without having to visit an apple store over 100 miles away.
    thank you

    I have never heard of a Factory 4-digit passcode.  If you are the original owner of the iPhone you will need to go into DFU Mode...
    First:  Put the device into DFU mode.
    DFU MODE STEPS
    Hold the Power Button (3 secs)
    Continue holding the power button and also hold the home button (15 secs)
    Release the power button while continuing to hold the home button (10 secs)
    Your device should prompt with the "Connect to iTunes Screen"
    Second: Plug it into your computer and open iTunes. It will either prompt to restore and up date or you can manually restore using the following steps. IOS Restore Steps Before restoring:
    Verify that you are using the latest version of iTunes.
    Back up your device.
    Transfer and sync content to your computer.
    Restoring your iOS device
    Connect your device to your computer.
    Select your iPhone, iPad, or iPod touch when it appears in iTunes. Select the Summary tab, and click the Restore button.
    Click Restore.
    After a restore, the iOS device restarts. You should then see "Slide to set up". Follow the steps in the iOS Setup Assistant.
    If needed, restore your device from a previous backup.

  • More details about message with code 31 (DNS update failed) in DHCP log file.

    Hello,
    Is there any way in Windows Server 2008 R2 to identify which exactly update has failed in DNS when code 31 is encountered.
    It is for "A" record or "PTR" record of DNS ?
    Thanks in advance.
    Regards,
    Andrejs

    Hello Steven,
    Thanks for your answer. I will look at DNS event logs.
    I am asking about it because in DHCP server log time to time I can see blocks of following records:
    30  04/14/15  16:19:02    
    DNS Update Request     10.1.10.5 
    PC1.domain.local  0    
    6
    11  04/14/15  16:19:02    
    Renew                                 
    10.1.10.5  PC1.domain.local  2255794051 0
    31  04/14/15  16:19:02    
    DNS Update Failed         
    10.1.10.5  PC1.domain.local  0    
    6
    30  04/14/15  16:19:02    
    DNS Update Request     10.1.10.5 
    PC1.domain.local  0    
    6
    11  04/14/15  16:19:02    
    Renew                                 
    10.1.10.5  PC1.domain.local  2255794051 0
    32  04/14/15  16:19:02    
    DNS Update Successful 10.1.10.5  PC1.domain.local 
    0                    
    6
    For this VLAN DHCP is about to update both „A” and „PTR” RRs. Besides that I can that transactionID (2255794051) is the same.
    Does it mean that first 3 records are about let’s say “A” RR for which update has failed and last 3 records are for “PTR” RR for which update succeeded?
    Or, does it mean that these are two consecutive attempts to update both RRs where first attempt failed but second one succeeded?
    Regards,
    Andrejs.

  • How do I use Disk Utility to help install Mountain Lion after many failed attempts?

    I tried to install Mountain Lion from an App onto my MacBook.
    First it said that my disk was damaged to i tried to repair it.
    Didn't work.
    Then it said I didn't have enough room to install Mountain Lion.
    Then I tried to restore Lion.
    Didn't work.
    Then someone suggested I reset my PRAM.
    Tried that, and now I am stuck.
    I can't restore any of my backups from timeline.
    I can't reinstall OSX because my drive is now locked.
    And I don't know how to use Disk Utility to solve this problem!
    Any suggestions welcome... I'm in way deeper than I understand and feel like anything I do is making this worse!

    I gather that your computer is in a less than satisfactory state, so the process below will basically start you from scratch, but you shouldn't lose anything.
    Okay, can you inspect the Time Machine Backups with the Finder? About two or so folders down you should start seeing your system files. Assuming all your files are present.
    Important^
    You probably have an installation disk that came with your macBook.  Boot from that CD and install from the CD.
    Run the verify disk utilites and repair utilities if necessary.
    You may want to erase your disk from the CD's disk utility. This will erase your Hard Drive (make sure you do not erase your backups, as that would be very bad).
    Once the installation is complete, run all system updates. Either look through your backup and find the Mountain lion installation app, or download it from the app store again. 
    Run the ML installtion app.
    Once everything is up and running, move all files and folders you want from your TM backups and you should be good to go.

  • Efi Boot Problem after several failed attempt to install Windows 8

    Hello, excuse me in advance for my bad English level!
    I have a Macbook Pro 17" i7 2,2 Ghz (early 2011 OSX 10.9.4) equipped with a 750 Gb Samsung SSD and a Secondary 750 Gb Toshiba HHD mounted in place of the Original Laptop's DVD optical Drive.
    I've tried several times to Install Windows 8.1 into the Secondary HHD Drive (USB KEY created with a Windows 8.1 Iso Image through the Bootcamp assistent) but without success. This is the message at the end of the Windows 8.1 installation process:
    Windows could not prepare the computer to boot into the next phase of installation. To install Windows, restart the installation.
    I don't Know why and I Don't Know what to do... The problem seems to have no solution and I'm so frustrated!!! .
    But Now I've Noticed, if the EFI Boot partition is selected during the macbook's startup process, this Error Message:
    I've formatted the second HDD Hark Disk now and there should be no trace of Windows in my laptop so... why this message appears?
    So I've Mounted the EFI boot Partition in OSX and that's It:
    So...
    1) Is There some file I Can safely delete to remove this Windows's error message?
    2) Is It Normal that EFI Boot Partition appears during the Macbook Startup?
    THANKS IN ADVANCE FOR YOUR HELP!

    Hi,
    Well from what I can see here you may have a hardware problem with the player. If it is not being recognised as a removable disk I would suggest if possible try it on another PC and see how it behaves. If there are no problems can you post some system details otherwise I'd either return to the dealer and they should swap it for you our contact customer support and they should be able to assist.
    In answer to your question holding down the play pause button while inserting the device into the port starts it in recovery mode and you should a be able to recover from there but as the unit is behaving so badly I'd gof for my former diagnosis.
    Hope this helps,
    John

  • How can I get iTunes to re-locate my media content on the hard drive, after a failed attempt at copying the library to an external drive?

    Long story short, I attempted to use an external drive to house my iTunes library to relieve some storage space on my MBP hard drive.  The external drive was formatted as FAT32 and it got hung up on an HD movie in excess of 4GB in size.  I had to reformat the external drive as MacOS Extended (Journaled) to solve that problem....but then the bigger issue showed up....
    While reformatting the external drive I switched iTunes back to the original library location on my local hard drive.  Unfortunately, iTunes doesn't recognize all of my content that did manage to get copied to my external drive in the first attempt to transfer content to that external drive.  Nearly 2200 files have exclamation points next to them.  Here is my question:  Can I get iTunes to re-locate all of my content at once in the original iTunes files on my local drive without having to "locate" each of the 2200 files one at a time??
    HELP!

    try if this script works for you:
    iTunes Track CPR v1.3 
    This script attempts to locate the files of so-called "dead tracks"--iTunes tracks designated with (!)--that you assume are not actually missing but are still located in the iTunes Music folder in their "iTunes File Order" (Music -> Artist -> Album -> file.xxx)."

  • After a failed attempt to update ipad through itunes, ipad is frozen black, does not respond and does not show in itunes when connected

    I connected my Ipad to my computer and I started itunes. Ipad needed updating so I proceded. Then there was an error and now ipad is not working at all. I have updated itunes, and restarted the computer, but still, now, itunes does not recognize ipad when connected. What can I do?

    Was it EVER jailbroke?

  • Imac is painfully slow. Opening up applications takes 2 to 3 minutes. This occured just after a failed attempt at downloading a TV episode on Itunes.

    I was downloading a TV episode in Itunes when it froze. The download was not completed. I had to use the emergency shut down processes and then restart my Imac. Everything now takes 2 to 3 minutes to open up. I have access to all my applications,as far as I know,  but everything including my internet is painfully slow. Almost like itues is still running in the background or something.

    Go to user>Applications>Utilities>Activity Monitor and check to see what applications are using all your memory.  You can quit the offending app in Activity Monitor - please let us know what happens,

Maybe you are looking for