I receive the error: Unable to load block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll

I have two Major issues with our Infinity Project computers,
We have one entire lab that is getting this error... "Unable to load
block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll.
Please verify that the component exists and any dependencies it may
have are satisfied." It is also producing this error with
NumEntry.dll. Both files exist. I am not sure what
dependencies these files may have. Ideas?
We have several systems that are giving the following error on one of
our labs... "You have exceeded the number of block functions allowed by
VAB for Infinity; contact Hyperception regarding upgrades." From
what The professor here at UTA told me when I first took on this
project, this was a problem that we had on the previous boards and that
someone at Hyperception was able to help us resolve this problem.
Can you help out with these issues? The first one I need an answer today if possible.
Thanks,

We have seen this type of problem on some computers (we do not know why as of yet).The problem with missing blocks is very likely being caused by file permissions, and can be seen when non-administrators are using VAB software. To resolve this: 1. login as ADMINISTRATOR 2. run the command line script from a DOS prompt as shown below: cacls "C:\Program FIles\Hyperception\VABINF" /T /E /G Everyone:F It will scroll through the name of every file in the provided directory, and all subdirectories. This should reset every file, and allow the USER to access all files in VAB software. This should correct the problem. Regards,Steve

Similar Messages

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

TS1717 I get the error "unable to load data class info from sync services" and eventually itunes freezes-will anything in this article help?

I get the error "unable to load data class info from sync services" and eventully itunes freezes. will this article help me?

Hello there brigidfromca.
Messages can always be pretty daunting when we're not sure where to start. I was able to locate the following Knowledge Base article that discusses the very message you're getting:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/TS2690
It is a pretty thorough document with multiple steps to review, but looks to be great place to start for a resolution for you.
Thanks for using Apple Support Communities to reach out to us for answers.
Cheers,
Pedro D.

Why am I now receiving the error 42404: a required iTunes component is not installed after the 10.5.3 iTunes update? Now, I cannot sync my iphone...

Why am I now receiving the error 42404: a required iTunes component is not installed after the 10.5.3 iTunes update? Now, I cannot sync my iphone...I have uninstalled and re-installed several times now without any luck.
Thanks,

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I get the error: Unable to load a GUI

Every time I try to download the latest version of Flash Player I end up with the error message : Unable to load a GUI. I did the live chat with Adobe Support and they narrowed it down to being technical. How should I fix this? I have to fix it or I won't be able to download flash player.

Thank you MerryMort, you've been a lifesaver! I checked out your last post, and the link you put up helped. It started up the download manager instantly. I tested out youtube and the videos there started up instead of giving me the message to install last version of flash player! Again thanks.

Flex Builder 3 Error: Unable to load SWC

Hi,
I am trying to use the YahooMaps component (YahooMaps.swc) in
my application. I have included it in the build path of my
application.
Steps followed:
1. Right-click on the project and choose Properties or open
the Project menu and choose Properties.
2. In the project properties dialog, choose Flex Build Path.
3. Select the Library path tab, and press the Add SWC...
button.
4. Selected the YahooMap.swc
I still get "Unable to load SWC: YahooMap.swc". It is an AS
3.0 component. Any help will be appreciated.
Thanks
Sumit

Hi Peter,
Thank you for your reply.
I have followed the documentation on the site you provided.
All I have done so far is:
1. Create a new flex project in Flex Builder 3
2. Once the project is created, I try to add the YahooMap.swc
to my Flex build path.
3. Once I add the YahooMap.swc, it fails with the error
"Unable to load YahooMap.swc" in Flex Builder 3.
4. FB3 does not recognize YahooMap when I try to import it in
AS3.
import com.yahoo.maps.api.YahooMap;
I am not sure what I am doing wrong. Does it have to do
something with the version Y! has used to build the YahooMap.swc
and Flex Builder 3?
Thanks
Sumit

Web Report Viewer error - Unable to load client print control.

Dear All,
We have a problem with Report Viewer print funtionality. Getting the error "Unable to load client print control." on click of Print button.
We tried all solutions posted in web - nothing resolves the issue.
The print works fine when we open the report via a browser. But the same is not working through our application. We have the application installed on the Report server itself and the user has Admin previleges.
Please find below the details
Report control: ReportViewerWebControl.axd
Version: 9.0.30729.4402
SQL server version: SQL Server 2008 R2, 10.50.2500.0 (running on Windows Server 2008 R2 - 64 bit)
Your help on this would be highly appreciated. Please let me know if you need any specific information.
Thanks,
Naga
Nagaraja

Hi, Larry,
Thank you for your answer which remind me and lead me to the resolution. I have struggling on this SQL Server Report Server 2012/Client printing control for
2 days.
I just cannot figure out why it kept prompting non-admin XenApp users for SSRS installation. Thanks for your notes again.
I have 2008 R2 server setup as XenApp server for the publish apps. We published the IE to user to access Web application with SQL 2012 reporting service in
the backend.
In the control environment, users do not have permission to install any software. This SSRS has to be installed as administrator under “Install mode” in XenApp
server.
Yes, 32bit IE works for me but 64bit IE works too.
You just need to ensure which version of IE you’re using to install the SSRS. I’m not aware of using 32bit IE for SSRS installation in server but publish 64bit
IE to client. That’s my mistake.
Thanks again.
JohnnyW2012

Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flashplayer. With the Reader, I was able to find a different install

Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flash player. With the Reader, I was able to find a different installation link using the troubleshooting guide. I cannot find the same with flash player. Please tell me how to install Flash player because there is a website that I cannot even view without it. BTW That is annoying that I cannot even see the website without flash player
my system is XP

Use these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X
For Adobe Reader go to http://get.adobe.com/reader/enterprise/

SGEN: error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.

Hi,
I appollogize if this post is off topic. I have problem wiht publish WebApp MVC.
I have website (MVC) with one Web reference. Build and run in VS working. But when I tried to publish to disk I get error:
SGEN: error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
I have VS2013 Profesional with all updates and Windows 8.1.
If I remove web reference then publishing working. Where can be a problem? Thanks.

@Marek Bober,
Thanks for sharing the solution back to here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error: Unable to load the GSS-API Shared Library

Hi all,
I'm trying to install a working copy of SAP on a Debian Etch host. I've tried all versions available here: ftp://ftp.sap.com/pub/sapgui/java/ (710 r[2-6]) The jar installer completes successfully without error, but when I attempt to launch the application, I'm greeted with the same critical error each time. Here's my connection string:
conn=/M/my-server-hostname/S/3610/G/PRD_GENERIC&sncon=true&sncqop=3
Here's my (Sun) java version:
java version "1.6.0_06"
Java(TM) SE Runtime Environment (build 1.6.0_06-b02)
Java HotSpot(TM) Server VM (build 10.0-b22, mixed mode)
Here's the full error message:
Error: Unable to load the GSS-API Shared Library
named "sncgss.so"
Fri Nov 21 16:07:25 2008
Release 710
Component SNC (Secure Network Communication), version 5
rc = -1, module sncxxdl_mt.c, line 342
Detail SncPDLInit
System Call dlopen
Is there a software dependency I might be missing? This is my first attempt at installing SAP on a Linux host, so there may be something else even more obvious that I'm not seeing...
Thanks in advance for any help you can provide.
-Eric

Hi,
one solution should be to set the env variable $SNC_LIB to you libseude.so, e.g.
$>setenv SNC_LIB /usr/sap/<sid>/SYS/exe/run/libsecude.o (or wherever the lib resides)
and then restart guilogon.
Also, as fas as I know, SAPGUI has issues with Java 6, so I would rather go with Java 5 or 1.4.2.
Oliver Stabel

Received the error when updating to inDesign 2014 "Unable to extract to temp directory." c

Received the error when updating to inDesign 2014 "Unable to extract to temp directory." Anyone have a fix for this?

Tjshannonhigg you will want to ensure that the User account you are logged into has proper access to the temp directory and that there is sufficient disk space available.

HT3951 I have several tv episodes stuck in my downloads on my iPad. I receive an error, unable to download when I try to resume downloading. I can't clear them out of the download queue. How do I get rid of these from download?

I have several tv episodes stuck in my downloads on my iPad. I receive an error, unable to download when I try to resume downloading. I can't clear them out of the download queue. How do I get rid of these from download?

You can always finish the downloads in iTunes on your computer and then the TV Shows to the iPad. Launch iTunes and go to Store>Check for available downloads. Finish the downloads and then sync the iPad.
As far as trying to finish the downloads on the iPad .....
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to download again.

Received the error 4960 whilst download was extracting - now am unable to cancel download

My trial took three days to download. Am now eventually at the extracting stage, and I have received the error 4960 message. It has been suggested in other threads that when this happens you should cancel the download and start again, but I am unable to cancel as it says it's still extracting. How can I start again? And how do I make sure it downloads properly this time?

Are you trying to download a trial? If so you can complete solution 1 in Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Solutio n_1 to reset the download experience. I would recommend choosing the default location of your User folder when reinitiating the download.
Alternately you can follow the steps listed at http://forums.adobe.com/thread/981369 to initiate a direct download.

HT1923 after following the instructions to completing uninstall iTunes and related components, and I'd restarted and reinstalled iTunes, i received the error message that iTunes couldn't load because the deleted Apple Application Support wasn't present. W

After following the instructions to completly uninstall iTunes and related components, I restarted computerand reinstalled iTunes, Then I received the error message that iTunes couldn't load because program file Apple Application Support (deleted as per instructions) wasn't present. What now?

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

HT3204 I have been receiving the error message ...'iTunes store is unable to process purchases at this time. Please try again later" over that last month with increasing frequency

I have been receiving the error message ...'iTunes store is unable to process purchases at this time. Please try again later" over that last month with increasing frequency. What is the cause and solution?

Hello e-b p,
Thanks for the question, and welcome to Apple Support Communities.
When encountering iTunes Store connectivity issues, the following resources provide the best solutions. To isolate the issue further, I'd be curious to know if it persists on other Wi-Fi networks (assuming you are using a portable computer). Either way, please attempt the steps outlined in these articles:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M.

I receive the error: Unable to load block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll

Similar Messages

Maybe you are looking for