I received a message on my new Samsung S5 that said this mobile number does not have permission to send messages. Further it say to contact the acct. owner (me) to change permission. What is this aboutand how do I grant permission?
Duplicate post - please see:
I got an new Samsung S5 this week. Now I am getting a message saying that this mobile number does not have permission t…
Message was edited by: Admin Moderator
Congratulations on your new phone Gramps5019! Let's make sure we fix this asap. All you have to do is go to Settings from your phone, the More>Select 'Default SMS App' and choose "Messages" instead of "Messages ". This will fix it.
AdaS_VZW
Follow us on Twitter at @VZWSupport
Similar Messages
-
All I did was tap the red message+ icon on the home page and I got this as one of the messages. I do not know where to go to grant the desired permission.
Congratulations on your new phone Gramps5019! Let's make sure we fix this asap. All you have to do is go to Settings from your phone, the More>Select 'Default SMS App' and choose "Messages" instead of "Messages ". This will fix it.
AdaS_VZW
Follow us on Twitter at @VZWSupport -
Itemization item 00001 does not have a cost element Message no. CKBK024
Hi,
I'm getting the following error message while working with Easy Cost Planning.
Itemization item 00001 does not have a cost element Message no. CKBK024
Can any respond immediately on this.
Required information of this issue:
Costing Variant (std): PS06
Material Valuation: 4 Planned Price, 2 Std Price, 3 Moving Average Price.
Activity Types/Processes: 1 plan Price for the Period, 6 Most Up-to-date Plan Price.
CO Version Plan/Actual
Sub Contracting: 3 Net Quotation Price.
Quotation In Purchasing : Actual Quota Arrangement
External Processing: 3 Net Quotation Price, 4 Gross Quotation Price
OverHead: No Assignment
And Work Center defined fine had the assignment of Activity type and Cost Center.
In KP26, activity type rate defined for period in combination with Cost center and Activity Type.
Then what would be the problem, pl respond immediately.
VemulaHi Friends,
I, my self resolved the issue. by considering the following 3 rd strategy in
For Activity Type/Processes: Considered 3rd strategy as below:
Activity Types/Processes: 1 plan Price for the Period, 6 Most Up-to-date Plan Price
and 2 Plan Price as Average of All Fiscal Year Periods.
Now it has been resolved.
Thanks all.
Now it is closed.
Vemula -
There were no results for I've downloaded the kindle app to my new iPad4 but when I went to Amazon UK and tried to download a book it said "this mobile app does not currently support digital downloads. I don't understand! I was told you could download kindle books from amazon straight to iPad if you download the kindle app first. Do I have to do it onto my computer and then sync it onto iPad? surely not?
Can you go here:
http://www.amazon.co.uk/Kindle-eBooks/b/ref=amb_link_173148087_8?ie=UTF8&nav_sdd =aps&node=341689031&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-1&pf_rd_r=1GDPPW8ZCN9Y 9NQF5VV0&pf_rd_t=101&pf_rd_p=365751407&pf_rd_i=468294
and not log on. See what you can do. -
When I try to download an iTunes software update i get an error message that my start up disk does not have enough room. What do I do?
You probably have run out of space, I would delete (or move to an external drive) things that aren't being used as much.
-
SSL VPN message "This (client) machine does not have the web access privilege."
Hello!
I am trying to configure the SSL VPN (WebVPN) and I am almost done but when clicking on the URL's I configured in the bookmarks, I get the message "This (client) machine does not have the web access privilege. Please contact your SSLVPN provider for assistance." I looked through the many tutorials and guides in existence and none talks about such error and the fix for it. In fact, if I search the net for this error message I get only one match, in the Cisco website, where is say that "The client computer does not meet the security criteria of having web access functionality through the SSL VPN gateway." and as fix it gave this tip "Check the URL to the gateway or contact the administrator if it persists." So, nothing on the website about what this issue is and how to fix it. I will provide my IOS configuration and hopefully someone will spot the issue. Here it goes:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
logging message-counter syslog
no logging buffered
enable secret 5 $1$1LLX$u7aTc8XfNqPZhPVGwEF/J0
enable password xxxxxxxx
aaa new-model
aaa authentication login userAuthen local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization network groupauthor local
aaa session-id common
crypto pki trustpoint TP-self-signed-1279712955
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1279712955
revocation-check none
rsakeypair TP-self-signed-1279712955
crypto pki certificate chain TP-self-signed-1279712955
certificate self-signed 01
3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31323739 37313239 3535301E 170D3130 30333233 31313030
33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 32373937
31323935 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100A8EF 34E3E792 36660498 9801F934 E8A41865 3599EA35 B073AC91 D7A53AF4
A4390D2F CB3DB2DE 936B28F0 A25F3CE1 6F40FD9E E79096F2 F89620E0 B31A7B34
649BBA22 AE44CB55 9F38BF0C 2F2770CF 8380C167 C17D760C 380E28E4 FF7D6874
9EFC310A 2AA60835 F1AA384F CD1A0173 19C98192 EBFBD531 24CB9203 EA9E7D54
B2C30203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
551D1104 06300482 02523130 1F060355 1D230418 30168014 0D9D62EC DA77EAF3
11ABF64D 933633F9 2BA362DC 301D0603 551D0E04 1604140D 9D62ECDA 77EAF311
ABF64D93 3633F92B A362DC30 0D06092A 864886F7 0D010104 05000381 81006853
48ED4E3E 5721C653 D9A2547C 36E4F0CB A6764B29 9AFFD30A 1B382C8C C6FDAA55
265BCF6C 51023F5D 4AF6E177 C76C4560 57DE5259 40DE4254 E79B3E13 ABD0A78D
7E0B623A 0F2D9C01 E72EF37D 5BAB72FF 65A176A1 E3709758 0229A66B 510F9AA2
495CBB4B 2CD721A7 D6F6EB43 65538BE6 B45550D7 A80A4504 E529D092 73CD
quit
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.10
ip dhcp pool myPOOL
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server 87.216.1.65 87.216.1.66
ip cef
ip name-server 87.216.1.65
ip name-server 87.216.1.66
ip ddns update method mydyndnsupdate
HTTP
add http://username:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 1 0 0 0
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group pppoe
request-dialin
protocol pppoe
username cisco privilege 15 password 0 xxxxxxxx
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
crypto isakmp fragmentation
crypto isakmp client configuration group vpnclient
key cisco123
domain selfip.net
pool ippool
acl 110
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map dynmap 10
set transform-set myset
reverse-route
crypto map clientmap client authentication list userAuthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
archive
log config
hidekeys
interface Loopback0
ip address 10.11.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Loopback2
description SSL VPN Website IP address
ip address 10.10.10.1 255.255.255.0
interface Loopback1
description SSL DHCP Pool Gateway Address
ip address 192.168.250.1 255.255.255.0
interface FastEthernet0
description $ES_LAN$
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet1
interface FastEthernet2
switchport access vlan 2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
bundle-enable
dsl operating-mode auto
interface Vlan1
no ip address
interface Dialer1
ip ddns update hostname myserver.selfip.net
ip ddns update mydyndnsupdate host members.dyndns.org
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip policy route-map VPN-Client
dialer pool 1
ppp chap hostname xxx
ppp chap password 0 xxxx
ppp pap sent-username xxx password 0 xxxx
crypto map clientmap
ip local pool ippool 192.168.50.100 192.168.50.200
ip local pool sslvpnpool 192.168.250.2 192.168.250.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http authentication local
ip http secure-server
ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 790
ip nat inside source static tcp 192.168.0.15 21 interface Dialer1 789
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 10.10.10.1 443 interface Dialer1 443
ip nat inside source static tcp 10.10.10.1 80 interface Dialer1 80
access-list 102 deny ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 102 permit ip 192.168.0.0 0.0.0.255 any
access-list 110 permit ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 144 permit ip 192.168.50.0 0.0.0.255 any
route-map VPN-Client permit 10
match ip address 144
set ip next-hop 10.11.0.2
control-plane
banner motd ^C
================================================================
UNAUTHORISED ACCESS IS PROHIBITED!!!
=================================================================
^C
line con 0
line aux 0
line vty 0 4
password mypassword
transport input telnet ssh
webvpn gateway MyGateway
ip address 10.10.10.1 port 443
http-redirect port 80
ssl trustpoint TP-self-signed-1279712955
inservice
webvpn install svc flash:/webvpn/svc_1.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context SecureMeContext
title "My SSL VPN Service"
secondary-color #C0C0C0
title-color #808080
ssl authenticate verify all
url-list "MyServers"
heading "My Intranet"
url-text "Cisco" url-value "http://192.168.0.2"
url-text "NetGear" url-value "http://192.168.0.3"
login-message "Welcome to My VPN"
policy group MyDefaultPolicy
url-list "MyServers"
functions svc-enabled
svc address-pool "sslvpnpool"
svc keep-client-installed
default-group-policy MyDefaultPolicy
aaa authentication list userAuthen
gateway MyGateway domain testvpn
max-users 100
csd enable
inservice
end
Thank you!Hi,
Please check SAP note:
2004579 - You cannot create a FR company from a Package
Thanks & Regards,
Nagarajan -
5.7.1 Client does not have permissions to send as this sender - NLB
Hi there- we have an application which sends out email notifications to a third party vendor. The vendor was previously using Exchange Server 2010 and they have recently migrated to Exchange Server 2013. They have also implemented NLB and have two Client
Access Servers configured.
Our application has been spitting out "SMTP 5.7.1 Client does not have permissions to send as this sender" errors ever since the vendor has implemented NLB. As our application uses the IP address of the Exchange Server, we have tried specifying
the IP address of both the Client Access Servers but that did not help. We then tried specifying the IP address of the NLB which did not make any difference either. The vendor has confirmed that anonymous relay has been enabled on the receive connectors of
both the Client Access Servers. I must add that our application sits on the vendor's server and the application and exchange servers are in the same domain. The "Send From" email address is an existing mailbox configured by the vendor.
Telnet from the App server to the NLB on port 25 has gone through without any dramas.
Is there anything else we would need to check to get this working?
CheersHi
Ensure that an dedicated relay connector is created in new exchaneg 2013 server
assign the correct subnets and the ip address of the app server into the relay connector
Run the below command to grant anonymous permission on the relay connector
Get-ReceiveConnector "Anonymous Relay" | Add-ADPermission -User "NT AUTHORITY\ANONYMOUS LOGON" -ExtendedRights "Ms-Exch-SMTP-Accept-Any-Recipient"
Specify the ip address of the mailbox server in your app server since the transport core services resides on mailbox server and cas server acts as stateless proxy
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
Hard Drive does not have enough space/error message
Hello: I am new to Mac but have been having trouble with my iMac for a while. I can no longer download my software updates. I have an error message that states "Your hard drive does not have enough space" - 5.7 GB is required.
I only have a 1 GB machine. What am I doing wrong?
When I go to my Macintosh HD icon on the desktop, it says at the bottom of that window that I have 495.9 MB available.
The error message tells me to go to the Startup file to delete items. I go there, but there's only two files. I do have music/photos/but I do not understand what's going on with my computer.
In addition, it turns itself off often, for no apparent reason. Any ideas?
Thanks!
J.ReneeThe error refers to space on your hard drive, not memory. Unless you've mis-typed, if you have only 495.9 MBs free on your hard drive then you are definitely out of space. If you continue operating with so little free space you are risking a catastrophic loss of data.
To free up space you will either need to delete unneeded personal files or copy some of your bigger files off to an external hard drive then delete them from your internal drive. Alternatively you can replace the internal drive with a larger drive.
You should maintain no less than 15 GBs or 15% of the hard drive's capacity as free space whichever is greater.
If you meant to type 495.9 GBs then you may have a corrupted disk directory. Try the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
Client does not have permissions to send as this sender
I have an Exchange 2013 setup. I have enable POP3/IMAP4. Most of users can send/receive message via POP3/IMAP4 from Outlook 2010/2007.one my account [email protected]
able to receive message via POP3 but not able to send message . When this account send mail we got the following error:
Your message did not reach some or all of the intended recipients.
Subject: report
Sent: 10/10/2014 10:52 AM
The following recipient(s) cannot be reached:
[email protected]' on 10/10/2014 10:52 AM
550 5.7.1 Client does not have permissions to send as this sender
[email protected]
Thanks and regards,
Dipendra paudel
Dipendra PaudelHi Dipnedra
Please check wether the problematic account is in the
Protected Groups:
Title: AdminSDHolder, Protected Groups and SDPROP
Link:
http://technet.microsoft.com/en-us/magazine/2009.09.sdadminholder.aspx
If the answer is YES, please quit these groups or try to create another account to test this issue.
Regards, -
This serial number does not qualify - try another
I just received my Adobe Photoshop CS5 Extended and trie to install it. I entered the serial number from my CS 3 Photoshop Extended and received the "This serial number does not qualify". Photoshop CS3 was part of the Design Premium bundle, but I really didn't want the additional apps when I bought the upgrade. Is this the problem?
Correct - you don't qualify for upgrade pricing on the standalone version (called a "point product") if your previous version came from a Creative Suite collection. CS collections only upgrade as collections, which is one of the many reasons why they're cheaper than the same mix of point products would be.
I suggest you contact Customer Support directly and see what your options are. -
When I open safari from the dock it opens as a small window at the top of the screen that is totally white and does not have a tool bar or exit options. All I can do is force quit to exit. What do I do?
With Safari open, press Command , (comma) to open Safari Preferences then select the Extensions tab.
Turn that off, quit (or force quit) Safari then relaunch to test. -
Error: Error #2029: This URLStream object does not have a stream opened
Hi there,
I am working on sound.
Error: Error #2029: This URLStream object does not have a stream opened.
Error occured during the sound.close()
Anyone Knows kindly reply,
Thanks in advance,
SaransoftIf you think that this error is 'normal' use this
try
sound.close()
catch( exc )
//Do nothing -
My iphone 3g has been used by multiple users before me...now it does not accept my apple id...it says no. of users on dis iphone exhausted...What do i do????
Your iCoud account remains in iCloud even if your device is restored. (In fact, you can't delete an iCloud account from iCloud, you can only choose to stop using it.) If the device is restored, or it may no longer be signed into your iCloud account but your account will still exist in iCloud.
-
I submitted an ISBN number and title to the iBooks Store using iTunes Connect.
A nameless iBooks editor replied back, reuesting that I submit a digiral copy of my ePub document to iTunes Connect.
The first time, I got past the login stage, but I was told that my title and ISBN had already been submitted and I was kicked, the second through sixteenth time that I attempted to login, the system reported "Apple ID does not have permission to access this site"
Can someone please tell me how to manuver around this roadblock?
Regards,
Robert Owen Cobb, CNE, MCSE
aka The Clemmons KidYou have to apply to be approved for iTunes Connect first.
Start here.
https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/apply -
Is there anyway to input a live, real time video feed into an iPad2? I would like to use it as a remote monitor for a microscope camera in electrophysiology. Our camera was designed to run off of an older Mac via a firewire connection. The camera is SUPERB but the computers are dated. The older computers connected to an AC line are electrically noisy. I have worked out converting the signal from our camera to HDMI and/or USB2 but the iPad2 will not allow any input except via iTunes which is not real time, and requires several steps. Is it possible to use the only mostly useless iPad2 as the excellent portable DC driven display which it is?!!! How do I get Apple to say anything but IGNORE, IGNORE IGNORE. This would be a universal application in academics and all I think I need is permission from the iPad2. The original signal was designed for Apple hardware. They can have the patents. HELP?
AJ Green wrote:
My wifi only iPad 2 has GPS, and a compass/accelaerometer to determine which direction I am facing. You need to enable location services.
Your wifi-only iPad does not have GPS. Read the specs for your device.
Maybe you are looking for
-
Business Catalyst Help | Work with pages
This question was posted in response to the following article: http://helpx.adobe.com/business-catalyst/using/pages.html
-
CSS for background image not transfering from template to new page
I have a gradient .gif in my templates which suddenly no longer transfers from the template to a new page created from the template. Everything else about the template transfers. I'm using Dreamweaver CS5 on a Mac running OS 10.6. I've pasted the
-
How to start EM in Oracle Web Center?
Please guide how to start EM in Oracle Web Center? as i am not getting emctl file in BIN Directory of Oracle Web Center Home... Please guide and help Thanks, Waheed.
-
RWB error: no suitable sender agreement found
Hi Experts, my scenario is File to proxy... i am developed end to end scenario i am using single stack i.e AAE while checking in RWB it gives the error : no suitable sender agreement found how to solve this error... please help me on this.. Thanks&Re
-
In EBS 11.5.10.2_V views are running with 0 rows
Hi, We are working on EBS 11.5.10.2 with Oracle 10g database. We noticed that most of our 11i verified queries stopped working from the backend, i.e., they are returning no rows. On further digging we found that most of the VIEWs have stopped working