I received a pdf attachment and it prints as garbage fonts from adobe reader. It is ok when I use Apple's preview though. I need a fix.

HP (my printer) sent me to apple and Apple tried and then sent me to adobe, but adobe doesn't help people unless they pay for it. Can anyone out there figure this out. It's just one pdf doc so far. All the other things I print are fine. example attached. I think.....

As touching a PDF with Preview can / does do the ugly to PDF get a replacement PDF.
Keep it away from Preview (always).
Ensure you've visited the web site of the manufacturer of the printer and downloaded the most recent software/drivers for your OS.
Have a fully updated Adobe Reader XI installed. Launch it then do "file-open" and open the PDF and go from there.
Be well...

Similar Messages

Can only print in 4x6 size from Adobe Reader - Help!

When printing letter sized docs using Adobe Reader, in the preview print box it says the size of my preview is 4 x 6. I can't find anywhere to change this to letter size. My page scaling is set at Fit to Printable Area. Adobe Reader thinks the output size is 4 x 6 - how do I change this?
Thanks!

When printing letter sized docs using Adobe Reader, in the preview print box it says the size of my preview is 4 x 6. I can't find anywhere to change this to letter size. My page scaling is set at Fit to Printable Area. Adobe Reader thinks the output size is 4 x 6 - how do I change this?
Thanks!

I have a ipod nano 4th gen. and it wont connect to my computer at all and I tryed to reset it but its been 10 minutes and iit wont go back to normal. It is charging fine when I use the wall plug. I need help!

I have a ipod 4th gen and it wont connect to my windows computer at all. I've tryed to reset it but its been 10 min and it wont go back to normal. I use the wall plug in to charge it. also it wont charge on my computer but other wise it works fine. I need help!

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Adobe Reader 9.3.2 - PDF attachment won't print from right click

Hi all,
Hopefully someone can assist some kind of suggestion, we have just rolled out Adobe Reader 9.3.2 upgrade from v8. When we now try to print a PDF Outlook 2003 attachment from the right click menu, we are prompted with the 'Open With' window. Selecting Adobe Reader 9.3 and press okay opens the document, but it doesn't spool. We can print the document fine from Adobe Reader itself, any ideas?
TIA
Frosty

I have seen the same problem in this forum a couple of times (on Windows Vista and 7 only), but I have never seen a solution for it.
Can you try if Adobe Reader 8.2 does the same? Download it from here http://ardownload.adobe.com/pub/adobe/reader/win/8.x/8.2/enu/AdbeRdr820_en_US.msi
If the same happens with Reader 8.2, then I have no other suggestion than to try an alternate PDF viewer.

Some Adobe PDF documents don't print from Adobe Reader; with other software it works correctly

Dear community,
I'm facing the problem that some Adobe PDF documents with lots of colors and lines (size less than 3 MB) don't print on our printers from Adobe Reader XI.
The same files when opened with PDF XChange or PDF Architect are printed out without problems.
How can I provide an Adobe Reader that is able to do so? Any recommendations about solving the issue are very appreciated.
Best regards
Christian

Word document problem fixed at the moment by deleting and adding the Lexmark printer again.

Users are unable to print from Adobe Reader X

Hi,
Multiple users in our environment report that they are unable to print from Adobe Reader X. They receive the following error messages (translated from Dutch) Document cannot be printed. There are no pages selected.
We are using Reader version 10.1.3
What we have tried to resolve the issue (without any positive results):
- Repair the installation of Adobe Reader.
- Update Adobe Reader to the latest version for Vista (x86) (10.1.7)
- Created new user profile for the affected users.
The documents can be printed without any errors from Foxit Reader.
At the moment we use the following workaround:
Open the document in Internet Explorer, and then print the document from there.
Does anyone have any idea how we can resolve this?
Best regards,
Duncan

James,
I'm sorry to hear that you were having the same problem under 9.5. I had recently updated to Adobe Reader 10 under Windows 7 and yesterday my "default printer" simply disappeared from the options on my control panel. I re-installed my printer, but today whenever I would open a PDF document and try to print it, the document would simply close with no further ado. After a bit of trial and error, I ended up uninstalling Adobe Reader 10 and going back to Adobe Reader 9.5. Now everything is working just fine.
nlncmjd

Can print color from Adobe Reader but not from Word

I can print a color document from Adobe Reader. But if I print another color document from Word, it comes out in black&white. Both are on an HP Color LaserJet CP2025dn printer. The settings selected in the system Print dialog are the same. What's the trick?

I hope you are doing well peggydii,
Are recieving any errors like printer offline message?
Can you see the printer in the computer as in the device and printers section?
Run this tool HP print and scan doctor Let me know if the tool finds any errors, I will do my best to help you.
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

I get a weekly email with a PDF attachment and when I open it it's to large to print. To date I'm not able to find a way to shrink or adjust the size. The doc was created on M/S Office-excell

I get a weekly email with a PDF attachment and when I open it it's to large to print and I know of no way to shrink or resize the doc. It's created in M/S excel. Can anymore assist....TX

From: Test Screen Name [email protected]
Sent: Sunday, August 04, 2013 11:32 AM
To: gunner0490
Subject: I'm not able to open PDF files in Adobe Reader XI.
Re: I'm not able to open PDF files in Adobe Reader XI.
created by Test Screen Name <http://forums.adobe.com/people/TestScreenName> in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5565198#5565198

In my Mac Mail Version 4.5, I am not received email pdf attachement. It is shown in some html like form in message content. Please help

In my Mac Mail Version 4.5, I am not received email pdf attachement. It is shown in some html like form in message content. Please help

Erdygirl please be aware you are posting to a public forum. I have removed your personal information from your previous post.
Please check your account at http://www.adobe.com/ to locate your serial number. You can find more information on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

When I open a PDF document and select print, Adobe stops working and closes. How do I correct this?

When I open a PDF document and select print, Adobe stops working and closes. How do I correct this?

Hi tbytrzll,
In order to help you better please let me know below mentioned information:
- Operating system version and name.
- Version of Adobe reader.
- Have you tried to update the Reader and if you are trying to print using any other application what is the result.
Have you tried any steps to resolve the issue.
Regards,
Ajlan Huda.

Can't print PDFs from Adobe Reader 7!

A few months ago I started having problems printing from Adobe Reader 7.
I can view PDFs fine. I can also view PDFs online through Safari with the Adobe Reader plug in.
What I've resorted to doing is using Preview to open PDFs that I've saved from Adobe Reader, and I can print fine through Preview.
But that isn't quite a good fix for me!
I can also print documents in other formats from plenty of other applications, so I know it's not a printer-talking-to-Mac issue.
What happens is this - I have a PDF open in Adobe and send it to print. The printer comes up in the dock like its working. After an appropriate amount of time (the time one would expect the document to print), it disappears from the dock as though it is done printing. But no document ever prints. And the printer never displays that it is receiving information to print.
Yesterday I spent a good chunk of time working on this problem to no avail.
I ran "detect and repair" in Adobe Reader but no problems were found.
I threw away Adobe Reader 7 (I think I was up to 7.0.7) and its preferences and other files and downloaded and installed Reader 6. I still couldn't print from Reader.
I installed patches and updates incrementally to from Reader 6 to 7.0.5 by allowing Reader to update itself, but that didn't help.
I uninstalled and reinstalled the printer. That didn't fix the problem.
I tried printing the document through Reader as an "image," but it just crashed the Reader.
I also downloaded and ran "Printer Setup Repair" (something I saw suggested in someone else's post about an Adobe print problem) but that didn't help matters either.
I'm sort of stumped. I'll also post this to the Adobe forums, but from what I've seen the folks over there are not really Mac users.
Any help is appreciated.
Cheers!
1.8GHz iMac G5 Mac OS X (10.3.9) 1.25 GB RAM, HP LaserJet 3330

Ann,
A few more thoughts or your dilemma...You might try looking at your system.log with the utility Console to see if it might give you a clue to the problem. (Not that I understand all the stuff in those logs, but when MS Word and Quark did not produce printouts, the Console log named the problem fonts.)
The culprit may be the Adobe Reader PPD or Plugin. The path to those are HD/Library/Printers/PPDs/Resources/en.lproj/ADPDF7.PPD and HD/Library/Printers/PPD Plugins/AdobePDFPDE700.plugin. So if you try deleting Adobe Reader stuff again, be sure to delete those docs too, before re-installing.
Note: I use Acorbat Pro 7 so I do not know if the filenames ADPDF7.PPD and AdobePDFPDE700.plugin are the same for Reader, but the paths might be helpful.
Before uninstalling and re-installing both Adobe PhotoShop and Reader, I would suggest that you check the integrity of you hard drive. Overtime, stuff gets out of place and some applications are more sensitive than others. If there is something wrong on the hard drive, replacing the applications will still produce the same problem. Repairing disk is different from repairing permissions. As in my previous post, boot up your computer with your OS 10.3.x Install Disk 1 and launch the Disk Utility app from the CD. Click on Repair Disk...
Hope this helps.
PB Ti 667, PB G3 Firewire (OS 9.1), Mac OS X (10.3.9) Wi-Fi, iPod 3G 15GB

Cannot Print PDFs from Adobe Reader

Hey gang-
Just purchased a new Brother MFC-9420CN color laser printer. Works great- with one exception.
I am unable to print any PDFs with it from Adobe Reader. But note this: The very same PDFs print fine using Preview! I initially discovered this problem using Adobe Reader 7.0.5, so I downloaded and installed the latest Adobe Reader 8.1. No Help. I also reinstalled the latest Brother Drivers- no help.
I then went into Printer Setup Utility and did the Reset Printing System- re-added all Printers- but no help. I am running OS 10.4.9 on a G5 iMac.
I've seen this mentioned elsewhere including here:
http://discussions.apple.com/thread.jspa?messageID=2643378&#2643378
Thoughts on how to fix this?
Thanks!
Dave

When you select print from the menu bar a print
window opens. Verify that the correct printer is
selected. Adobe will over ride some defaults and put
in itself. Let me know if this didn't work.
Thanks Glynn, but the correct printer is indeed selected. This is a weird one!
FWIW, here is my CUPS error log:
===== Wednesday, June 20, 2007 3:51:51 PM US/Eastern =====
I [20/Jun/2007:15:52:20 -0400] Adding start banner page "none" to job 10.
I [20/Jun/2007:15:52:20 -0400] Adding end banner page "none" to job 10.
I [20/Jun/2007:15:52:20 -0400] Job 10 queued on 'MFC_9420CN' by 'dave'.
I [20/Jun/2007:15:52:20 -0400] Started filter /usr/libexec/cups/filter/pictwpstops (PID 625) for job 10.
I [20/Jun/2007:15:52:20 -0400] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 626) for job 10.
I [20/Jun/2007:15:52:20 -0400] Started filter /Library/Printers/Brother/Filter/rastertobrotherSL4C (PID 627) for job 10.
I [20/Jun/2007:15:52:20 -0400] Started backend /usr/libexec/cups/backend/usb (PID 628) for job 10.
E [20/Jun/2007:15:52:22 -0400] [Job 10] pstopdffilter/pstocupsraster failed with err number -31000
E [20/Jun/2007:15:52:22 -0400] PID 627 stopped with status 1!
I [20/Jun/2007:15:52:22 -0400] Hint: Try setting the LogLevel to "debug" to find out more.
E [20/Jun/2007:15:52:22 -0400] PID 625 stopped with status 1!
I [20/Jun/2007:15:52:22 -0400] Hint: Try setting the LogLevel to "debug" to find out more.
E [20/Jun/2007:15:52:22 -0400] [Job 10] Opening raster file failed!
E [20/Jun/2007:15:52:22 -0400] [Job 10] error drawing page 1
E [20/Jun/2007:15:52:22 -0400] [Job 10] pictwpstops - got an error disposing of document = -9783
E [20/Jun/2007:15:52:22 -0400] PID 626 stopped with status 1!
I [20/Jun/2007:15:52:22 -0400] Hint: Try setting the LogLevel to "debug" to find out more.

Exported pdf from indesign drops punctuation when printed from adobe reader

The pdf prints fine when printed from acrobat pro, but depending on the export pdf settings from indesign, it will drop most numbers and punctuation when printed from adobe reader.

Is Adobe Reader installed on the same computer Adobe Acrobat is?

I have uninstalled and reinstalled the most current edition of Adobe Reader, including the patch. When I open a PDF file, the screen is first grey, then viewable, but the message "Adobe Reader has stopped working" comes up. How do I remedy this?

I have uninstalled and reinstalled the most current edition of Adobe Reader (11.9), including the patch. When I open a PDF file, the screen is first grey, then viewable, but then the message "Adobe Reader has stopped working" comes up. How do I remedy this?

RR,
One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
Failing a full recovery, hopefully you have one or more earlier versions and/or bits of artwork saved before it happened.

Before viewing PDF documents in this browser you must first launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.

Using Google Chrome, when attempting to open a PDF document, the following message appears:
Before viewing PDF documents in this browser you must first launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.
On my Mac, there is no way to just open Adobe Reader and accept the ELUA.

Hi Wade Perkins,
Please refer cant view pdf in browser.
Thanks.

I received a pdf attachment and it prints as garbage fonts from adobe reader. It is ok when I use Apple's preview though. I need a fix.

Similar Messages

Maybe you are looking for