I received an email gift card, but i can't redeem it!! plz help
I just got a e-mail gift card (25$) but i can't redeem it , i have the PIN e Serial Number, i've already tryed everything possible!!!!
OK, then go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.
Similar Messages
-
I have an account from Australia but I now live in Switzerland. I bought a Swiss Gift Card but I can't redeem it because I have 41 cents left from my Australian Gift Card. Please help me !
The only way to get rid of those little leftover balances is to make a request to iTunes Customer Service:
http://www.apple.com/support/itunes/contact/
Once they get it zeroed out, you will be able to enter your new Swiss billing credentials. -
Why won't it let me in?????
Flash Player 12.0.0.38 for ActiveX (Internet Explorer)
Flash Player 12.0.0.43 Plug-in (All other browsers)
Flash Player 12.0.0.47 (Mac OS X) -
I should have received an iTunes Gift card , but there is no sign of it ?
I should have received an iTunes Gift card , but there is no sign of it ?
The gift would be sent via email to the address you gave when you set up the gift. Have you checked that email account? If so and nothing has appeared, make sure there aren't any anti-spam filters in place that might be blocking emails from Apple. Then if you still don't see the email, try resending the gift:
http://support.apple.com/kb/HT1541
i still have something like 15¢ From last year and it was by a gift card and because of that The iCloud won't let me to Put a new payment from Visa Account
Having a credit balance won't prevent you from entering in a new payment method. A balance remaining would be an issue only if you're trying to change the country of your iTunes Store account. If your payment method is being rejected, then either it's invalid - a debit card which are in many countries not accepted, or a credit card from another country - or there's something amiss with your account. In the latter instance, or if the gift still doesn't come through, contact the iTunes Store and request assistance.
Regards. -
HT3702 I received a ITunes Gift Card but where do I use it?
I received a iTunes gift card but can't locate where to load it in. I play games and watch videos
Any help would be appreciated.
Thank youNote:
iTunes Gift Cards are only Valid in Country of Issue.
How to Redeem a Code > http://support.apple.com/kb/ht1574 -
I Received a Facebook gift card but when I try to use it to make purchases I'm immediately sent to iTunes. Does anyone know how I can by pass iTunes and use the Facebook card?
per facebook how to redeem your gift card https://www.facebook.com/help/210241279016563
-
I bought a Mac for education last month. However, i did not receive any app gift card. Where can i get it?
The gift card was from Apple and on campus venders. If you bought the Mac from someone else, then you didn't qualify. If you did buy from Apple or an official on campus Apple partner, speak directly to them.
-
My boss gave ma a gift card but I can not use it in my country, how can I change country to star using it?
You cannot change your iTunes country unless you are really moving to another country, nor can you change country association for a gift card. Give it as a gift to a friend who lives in the country of origin for the card.
-
I was given a $15.00 gift card but when I put the code in it shows no good. code is XRF20F2CX3NR2LH2
See this -> http://support.apple.com/kb/TS1292
-
How do redeem my gift card code after I reset my ITune password? It shows no gift card listed and I no longer have that gift card but still have a balance on it.
With iOS 7 you will have to provide the password for the old ID in order to delete the existing account from your iPad. If you can't do this, contact Apple for assistance by going to https://expresslane.apple.com, then click More Produces & Services>Apple ID>iTunes Store, App Store or Mac App Store>Disabled Apple ID.
As far as your missing contacts, when you get the password for the old ID reset, sign in with the ID and your new password at icloud.com and check to see if your contacts are there. If they are, export them as a vCard as explained here: http://support.apple.com/kb/PH3606. You can then import this vCard to your new account as explained here: http://support.apple.com/kb/PH3605. -
I have a master/slave setup with a 2-wire RS-485 connection via a StarTech PCI2S485 card http://www.startech.com/product/PCI2S485-2-Port-PCI-RS-422-485-Card-with-DB9. A Vista PC running LabVIEW 2010 is acting as the master to 6 slave devices. I am running a driver VI supplied by the company that made the slaves.
I've used a terminal program called Termite to monitor the ports during operation and have concluded that both the PC and the slaves are sending correct data packets (i.e. correct protocol and reasonable data). Termite indicates that the slave's response is being received by the PCI card, but the problem is that LabVIEW simply isn't reading the response from the card. Each time the driver VI is run it returns a "timeout waiting for slave to respond" error.
The VI and slaves I am using are designed for both RS-232 and 485 communication. I've verified the VI to run in 232 mode on a different COM port. I also wrote a simple VI using the VISA functions to test the ports on the PCI card, but I've had the same results. Hardware connections have been looked over carefully, but the fact that the card actually sends a correct message and receives a correct message indicates a different problem.
Any idea why LabVIEW can talk to the PCI card but can't hear it? Is there anything I can do about this, or does LabVIEW generally not like StarTech's PCI2S485 cards?
Thanks,
TimTim359 ha scritto:
I have a master/slave setup with a 2-wire RS-485 connection via a StarTech PCI2S485 card http://www.startech.com/product/PCI2S485-2-Port-PCI-RS-422-485-Card-with-DB9. A Vista PC running LabVIEW 2010 is acting as the master to 6 slave devices. I am running a driver VI supplied by the company that made the slaves.
I've used a terminal program called Termite to monitor the ports during operation and have concluded that both the PC and the slaves are sending correct data packets (i.e. correct protocol and reasonable data). Termite indicates that the slave's response is being received by the PCI card, but the problem is that LabVIEW simply isn't reading the response from the card. Each time the driver VI is run it returns a "timeout waiting for slave to respond" error.
The VI and slaves I am using are designed for both RS-232 and 485 communication. I've verified the VI to run in 232 mode on a different COM port. I also wrote a simple VI using the VISA functions to test the ports on the PCI card, but I've had the same results. Hardware connections have been looked over carefully, but the fact that the card actually sends a correct message and receives a correct message indicates a different problem.
Any idea why LabVIEW can talk to the PCI card but can't hear it? Is there anything I can do about this, or does LabVIEW generally not like StarTech's PCI2S485 cards?
Thanks,
Tim
RS232 interface consist of 2 indipendent communication crossed lines between 2 devices (9DSub connector: Pin 2-RX Pin 3-TX pin 5-Gnd)
RS485 interfaceis a bus, shared between 2 or more devices. (like ethernet or CAN Bus)
This means that an incorrect use of the bus can lead to a "packet collision" if 2 or more devices try to send a message on the bus at the same time or at least their messages, partially "overlap"
About 10 years ago I have used a PCI 2 RS485 port: I remember that I have to change the status of RTS serial control line to switch between transmit and receive mode.
This can be done using the serial VISA property:
Serial Settings --> Modem Line Settings --> DTR State
or using the VI
<LabVIEW dir>\vi.lib\Instr\_sersup.llb\serial line ctrl.vi (LV 8.6.1)
The result was that the slave device connected, send me the response after few nanosec. causing the lost of the answer.
because LabVIEW use more than some nanosec. to change RTS property after sending message on the 485 bus calling a VISA Write.
So for me there was 2 possibilities:
- use 2 RS485 port (1 for transmit 1 for receive echo transmit included)
- use this converter
http://www.advantech.com/products/ADAM-4521/mod_2E78D425-8B08-43F6-81B0-1B924E53E075.aspx
this converter, after sending a message on the bus, electronically switchs back to receive mode without losing a byte.
But the question is :
what does it means
"RS-485 mode supports Auto Transceiver turn around (ATTA)"
of your card?
bye -
I have ten usd free gift card but can not buy gems in Clash of clans 's game. So please check my ID and unlock it to let me my gems. Thank you!
Contact iTunes support at the link below.
http://www.apple.com/emea/support/itunes/contact.html -
I redeemed a $50 gift card and it says $50.00 is my balance but when I try to buy an app it asks me for my billing information. I don't want to use my credit card, I want to use the $50 gift card I paid for. Please fix this
Hi ...
asks me for my billing information
Apple "verifies" your billing information with every transaction whether it's purchasing media from the balance of redeemed gift card or a debit or credit card account.
Click Account right side of the App Store window then click View Account.
Make sure your name and billing address is correct then click Done.
Now try purchasing an app. -
I purchased a new computer, and downloaded I tunes and my music to my account. I previously used a gift card which shows i have credit. I went to buy a song and when i entered the email address and password it says that it is wrong. it directs me to make a new password, for which was do not want to do so because after an hour on the phone with apple support, i got it straight where i have one password for my apple id. the reference number for that issue is 425431646. I don't want to mess up by changing my password and not being able to connect via my apple accounts on my i pod, or computer.
Have you follwed the instructions here:
iTunes Store: How to redeem a code
Also see:
Redeeming gift card -
HT202359 I have redeemed a gift card but how can I use the credits that I gained?
I have redeemed a gift card and gained 5 song credits. When I try and buy songs, iTunes takes me through to the ''redeem'' page but when I try and enter the gift code, it just opens up a window that says this code has already been redeemed. How can I actually use the credits to buy songs? There doesn't seem to be an option to use ''credits''... Thanks.
What exactly do you see when trying to buy a song, what messages appear ? You can't change how items are billed, it's automatic, as long as you are buying for yourself then your account's balance should be used for the purchase, it's only if gifting (which can only be done via a credit card) or if your balance doesn't cover the entire purchase price that credit card details should be asked for - or if it's a new account and you didn't follow particular steps when creating the account. (A gift card can only be redeemed once, you can't re-enter its code.)
Maybe you are looking for
-
2008 Macbook pro left click not working properly after upgrading to 10.6.8
I have a 2008 Macbook pro and a few months ago after upgrading to 10.6.8 my left click has been wonky. Using the trackpad the left click eventually gets "stuck" or stops responding and I have to push it multiple times before it does anything. I have
-
Converting an html file with jsp contents to a text file for download
Hi guys, I'm currently having troubles with downloading a .jsp file to a doc file. The thing is i am able to download the desired file and make it as a .doc but when i open it with ms word 2007 i can only see the content of the html. The dynamic cont
-
Essbase and database in different server
Hi, It is possible to put the ESSBASE in one server and database(oracle , SQL Server) in another server? It is possible, what are the things i want to do? Thanks, PC
-
Hi, I have installed and configured OBIA 7.9.6... I haven't yet started any data loading... My question is, Will there be any tables displayed before data load in the Refresh Dates tab under Setup->PhysicalDatasources->Datawarehouse Currently my Refr
-
I have mobile me mail service. Use mac 10.6.7. Have latest firefox. Suddenly only can get "find my phone" - not mac mail - even when I type in the mac.me or mobile me mail in the browser window. Safari seems to work fine.