I recent repaired my screen and the carrier has been searching for almost a day what do i do
I recent repaired my screen and the carrier has been searching for almost a day what do i do?
You probably broke your phone when you tried to repair it yourself.
Similar Messages
-
I have downloaded Yosemite from the App store and I attempted to upgrade from OS X 10.9.5. It is stuck on a white screen with a moveable mouse pointer but that is it. I can't get Command + L to work, so I can see any progress that is being made and I have tried to force boot it twice. Each time I force boot the machine I get a progress bar that goes about half way across and then just a blank white screen. I have read on some blogs that patience is the best procedure for this freeze but I have been waiting for almost 36 hours now and nothing is happening. One thing I want to mention is I have VMWare installed with a virtual machine of 300gigs, could this be the cause of the hangup? My 27inch IMAC is about 3 or 4 years old with a terabyte hard drive and 32gigs of ram. I have unplugged everything from the back except the network cable. Is about 36 hours reasonable for an upgrade? Is there a way to cut my losses and revert back to OS X 10.9.5?
When you start your notebook press F8 to enter Advanced boot options.
Is Repair my computer option available?
If yes choose it and press ENTER. Follow the menu on the screen and when you will see System recovery options try to use System Restore option.
Do you have some important data saved on your notebook?
If not install OS again using HDD recovery option and after 2 hours you will have clean preinstalled OS and everything will be OK again. -
I have an old version of Firefox - Version 3.5.7.
I am trying to update to the current version. As part of the update, the system is first loading all of the intermediate versions.
I started the update 4 hours ago. It is still running. Most of the time, it has been downloading version 3.6.18. I am letting it run.
Is there any other way to get the most recent version?Thank you. That is basically what I did. I gave up on the update and downloaded a fresh version of Firefox.
-
Have recently updated Adobe Reader and now unable to open downloaded documents - Message received is could not open 'file name.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). When I check the file it shows Zero KB downloaded but the file appears - any suggestions?
Obviously your download was not successful.
What is your operating system? How exactly do you download such files? -
When I turned on my computer this morning it had a new noise coming from the top of the screen at the back.
Not loud but almost whirring.
What might this be ?21.5 Mid 2010
Processor 3.2 GHz Intel Core i3
Memory 4 GB 1333 MHz DDR3
Software OS X 10.8.5 (12F37)
I just found an answer !
I had moved my computer into another room and had to turn up the brightness, as I have always had it on the lowest setting. In doing so it created the noise, I turned it right down and it stopped. I have now set it about level 3 so it's not so distracting.
thanks -
i bought whatsup on 5th of june and my account has been debited for INR 60. Today(8th june) again my account has been debited for INR 55. I want to know the reason behind it?
You could go to the app store on your phone then tap on the update button bottom right then tap on purchases at the top and see what has been bought on your phone also you could goto itunes in you romputer and click on your account once itunes store has been selected from the left then click on account and enter your password and scroll down to Purchase history and click on "see all" and have a look at recent purchases
-
My computer won't turn off. It says iPhoto is doing something and iPhoto is doing nothing, the circle has been spinning for 45 minutes.
Try that. If that doesn't help:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Error message: ni: A frame has been dropped and the acqusition has been canceled
I use a NI PCIe 1433 framegrabber with a Basler spl4096-140km line camera.
Using triggered acqusition with an external source, I can get a framerate of 68500Hz in NI-MAX.
When I use the Matlab image acquisiton toolbox to acquire data, I however very often get the error message: 'ni: A frame has been dropped and the acqusition has been canceled". This happens even at much lower framerates (20kHz) and only seems to go away when acquiring data slowly.
Computer is a Dell Precision 7600 and I assume there should be no issues with RAM or the PC being slow. The error does not go away when reducing the data size (i.e. reducing the ROI to one single point that is readout).
Do you have any pointers why this error message appears and what can be done about it?
Thank you!
RetoHello,
I encountered the same problem and I think it is because the allowcation of storage in matlab cannot catch up with that of the camera so that it will drop frames when the buffer is full.
I also want to know how to solve that.
Yang -
I had this problem of not being able to open some files a couple of years ago and eventually was able to fix it but i can't remember how. Any help would be grateful.
The following document should help: Error: Adobe Reader could not open '*.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and was not correctly decoded.)
Please update this thread if your issue is resolved.
Thanks,
Shashi -
Can anyone assist me? I keep receiving this message when I download my ebook ''Adobe reader could not open .....acsm because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't decoded).'
Much appreciatedI think you should ask in the Digital Editions forum, Adobe Digital Editions
-
Hello,
I am getting a strange error trying to use the NI PCIe-1427 with the MATLAB image acquisition toolbox configured with continuous acquisition. After about 5 minutes of acquisition, I get the error below:
??? ni: A frame has been dropped and the acquisition has been canceled.
Does anyone have any clues as to why I am getting this error / where I can find out what causes it? I need to acquire several hours worth of data and this error completely aborts my acquisition.
--YHello,
Turns out that I found the problem. I had a slow memory allocation in my MATLAB code and this delay allowed too many frames to be accumulated in memory. I still do not know the source of the exact text of the error, but upon removing the slow memory allocation the error no longer occurs. I believe that it may have resulted from a buffer overrun of some sort in the underlying driver.
Given that this no longer poses a problem for me, I will not pursue it further.
Thank you for your help! -
Why can't I open a pdf file on my desktop? I have Adobe Reader and running OS 10.10.1 I keep getting the same message: "Adobe Reader could not open '8pdk_96_4.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."
I tried that.
I saved the file 8pdk_96_4.pdf to my desktop and tried to open it using Adobe Reader but I get the same message: Adobe Reader could not open '8pdk_96_4.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). -
Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
that is the message how do i correct this problemIt sounds like your file associations are messed up and Reader is trying to open your .jpg files. Is this correct?
If so, you just need to change the associations to choose what application opens them. Here's how: Change File Associations in Mac OS X -
Adobe Reader could not open 'aw14lookbook.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
Most likely http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html
-
I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered to reduce contrast. The background is now grey as well rather than white. The accessibility options permit only three choices. First, increase type size. With the the low greyscale, thin typeface, increasing type size makes it HARDER to read. There is no option for contrast enhancement. Third, the background switch options suffers from the same deficit as the white background. The third choice is to enhance brightness but without the option to change contrast, this is useless. Am I missing something? Can this be fixed? How? When? Are you planning a similar negative "update"/change to other devices?
I am having the same problem. I have gone through every setting, set the bold font, contrast, larger font....everything I could find in any post to try and help - and between the new color scheme that makes it virtually impossible to use the pictures of my grandchildren as background (the picture colors now become the theme colors - which now match the colors of many of the "flat" icons...) I am finding the phone very difficult to use--espeically things like the calendar which has now become very hard to "see" and use. If I can't revert this thing to iOS6, I may have to get a different phone.
Maybe you are looking for
-
Animated Gif Image does not render correctly on screen
I have added animated gif image to the scene it does not render correctely.it shakes on the screen. plz give me any suggestion i use following code Image logo= new Image(getClass().getResourceAsStream("images/image.gif")); logoLabel.setGraphic(new Im
-
Database upgrade in a Dataguard Configuration - Help !
Hello Everyone, I am upgrading our test Oracle 11G RAC/Dataguard Configuration from 11.1.0.6 to patchset 11.1.0.7 and have run into an issue when trying to apply the patchset to one of our standby databases. I have upgraded our primary database to 11
-
How to modify an existing query to add a column
Hi all, I have an existing query : SELECT 2 as SOURCE_SYSTEM_ID, LI.IPROD AS SYSTEM_ID, LI.IPROD AS PART_NUMBER, LI.IDESC AS PART_DESCRIPTION, IsNULL((SELECT LZ.CCDESC FROM HCMEUP01.FRDA385A.LBPCSF.ZCC LZ WHERE (LZ.CCTABL = 'SIRF2') AND LI.IREF02 = L
-
DB and 10gAS infrastructure install...
Hello: We have an ERP product just like Oracle eBusiness suite (Oracle Applications) built using Oracle DB, Forms, Discoverer, Reports, Portal etc. for small and midsize companies (very low foot print compared to Oracle eBusiness suite). Our product
-
Get a dimension member with a criteria on property
Hi All, I added a property CB to category dimension to specify current budget. We add a value "1" to property of member that we want use for Budget. We use it in script logic, for example select(%version%, %id%, category, cb=1) xdim_memberset categor