I recently brought a HD PVR, i put in the disk to install the hard drive and it said " This program doesn't support DOS Mode! how do i get out of DOS Mode?? Please Help

What exactly are you trying to do? PVRs are for recording from TV not computers.
Either way, if it's complaining about DOS mode, it's Windows oriented software and not Mac compatible.

Similar Messages

I was updating my ipad to ios 6.1.3 and it restarted and turned on with an itunes logo and the usb cable. People say this is recovery mode,how do i get out of it?PLEASE HELP ME!!!!!!!!

My ipad 2 was being updated to ios 6.1.3 and when it rebooted it went to recovery mode. I want my ipad 2 back with or without my files.Please help

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

My ipod touch 5 gen still in recovery mode how can i get out in recovery mode? i update it in ios 6.2 while my itouch is in jailbrake

my ipod touch 5 gen still in recovery mode how can i get out in recovery mode? i update it in ios 6.2 while my itouch is in jailbrake

Google "DFU mode", put it in that mode and Restore it in iTunes.
And stay away from jailbreaking.

I wanted to trouble shoot, put comupter in safe mode , now its stuck , closed FF 3 times, re-started computer, still in safe mode.how do i get out of safe mode

i wanted to do trouble shooting, i put computer in safe mode & now i can not get out of safe mode. I've closed FF & re-started computer 3 times, even shut down computer, still in safe mode. What do i need to do to get out of safe mode?

Hi,
Please see this article: [[Firefox is stuck in Safe Mode]]
I hope that helps. Post back if not.
--Edward
EDIT: Just noticed that you already rebooted. You say that you "put computer in safe mode". Is firefox in safe mode or your whole computer?
If '''Firefox''' is stuck in safe mode despite reboot
* Check that the shift keys on your keyboard are not stuck down.
* Uninstall firefox and install again (your settings will not be lost as they are stored in your profile folder).
Let me know if neither of those works.

Itunes put ipod into recovery mode. how do i get out

I was updateing my ipod and then my plug came out of the ipod. Now it says its in recovery mode and i have to restore it. Is there any way i can get out of recovery mode so i wont lose pictures and videos?

If this program will not get the iPod out of recovery mode you will have to restore via iTunes and erase the iPod.

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
Bob

Bob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR

I have recently updated my OS from Leopard to Snow Leopard but now my external hard drive and even my iPhone are not recognized by my Macbook Pro! Anyone have a suggestion??

I have recently updated my OS from Leopard to Snow Leopard but now my external hard drive and even my iPhone are not recognized by my Macbook Pro! Anyone have a suggestion??

Zap the PRAM and Reset the SMC, then try again. If the problem remains, update to 10.6.8 and repeat.

How can I get out of recovery mode?

How can I get out of recovery mode without restoring my iPod?

Try using Yamipod.
http://www.yamipod.com/main/modules/downloads/
Make sure iTunes is closed before you use yamipod.
Another issue I have heard about if are in Windows is a Parental Controls conflict with iTunes and your iPod trying to access the iTunes Server for the Restore Software Update.
Make sure there are no firewalls blocking it if you are on a Mac.
Try that, if not, post again.
Max

Osx stuck in single mode, how do I get out please

I have a Mac Pro OSX mountain lion, stuck in single mode,not sure of administrative account so just want to get out of single mode .it displays right now...display all 1475 possibilities?(Y or no) I hit No and it repeated I don't want to Press yes unless I know what's going to happen. can someone please Help Me.I just want to get out of here so I can take it to the Apple store tomorrow

If you cannot login you will have to go back to single user mode in order to reset a password.
Follow the instructions here:
http://www.macyourself.com/2011/08/20/how-to-reset-password-for-mac-os-x-10-7-li on/
excerpt:
Shut down your Mac and turn it back on while holding down the Command and S keys at the same time until your see a black screen with white text. This is known as Single User mode.
You can skip this step, but it’s recommended that you don’t because it will check the consistency of your hard drive. At the prompt, type fsck -fy and press Enter.
Once the disk check is complete and the prompt returns, type mount -uw / and press Enter.
Type launchctl load /System/Library/LaunchDaemons/com.apple.opendirectoryd.plistand press Enter.
Type ls /Users and press Enter. All of the usernames on the computer will be listed, which is helpful if you don’t know or remember what these are.
Type dscl . passwd /Users/username password while replacing username with one of the users displayed in the previous step and replacing password with the new password of your choice. Press Enter. You will likely get an error message about a file or directory not being found – it’s safe to ignore this.
Type reboot and press Enter.

My ipod will only let me enter apps by double clicking and there is now a vioce telling me what app i am on which wasnt there before how do i get it back to normal, please help?????

my ipod touch will only let me enter apps by double clicking and there is now a voice which wasnt there before how do i get it back to normal does anybody know, please help ??????

Head to Settings -> General -> Accessibility and turn off VoiceOver.
See this article for more assistance.
http://support.apple.com/kb/ht3577
B-rock

IPhone 3GS froze during iOS 5.1.1 update - how do I get out of recovery mode without having to restore?

So I tried to update my iPhone 3GS to iOS 5.1.1, like iTunes told me to do, and it froze part way through the installation for a couple of hours. I tried to "reset" the iPhone by pressing both the home and power buttons simultaneously, but now iTunes tells me my iPhone is in recovery mode. From my limited knowledge, it seems I need to restore my iPhone, but I don't want to lose anything, like my SMS history.
Is there a way to get out of recovery mode without having to restore?
Thanks!

I came across this post as my iPhone 3Gs had gone into recovery mode on its own accord.   I had hundreds of photos unsaved and was gutted when I saw this post, I felt even worse as it was not the information (gdgmacguy) I wanted to read.
Unfortunately, the above post is simply wrong! A system cannot destroy information in a blink of an eye.   If it were that easy, the forensic teams across the world would have a hard time. A criminal could simply force a phone into recovery to remove all the data. Please!
I managed not only to take the phone out of recovery mode but also, salvaged all the data held on it.
To be fair, I am a little annoyed at Apple for not offering a salvage option on the device for such a situation. And it may be that they will not like me sharing this information, in which case I believe this view to be morally wrong because photos are so important. We all make mistakes, in terms of forgetting to backup from time to time.
What I used was the Redsn0w software, running as an administrator in XP compatibility mode. In the ‘Extras’ section it as a Recovery Fix option. It simply runs some software that takes the device out of recovery mode. I had to run it twice for some reason but the second time (out of desperation) worked a treat. The phone is now exactly as it was before it went into recovery mode. More to the point, it allowed me to backup all the photos and videos that I had failed to do before hand. And let’s face it, photos and videos are usually the most valuable stuff we keep on our phones.
I hope this help anyone in the same situation. I really hope someone from apple reads it and is able to convince the bosses that a recovery option is very important. And to take note that YES it is possible to recover data on a phone stuck in recovery mode. And more than likely it would be easier for apple, compared to other non-apple professionals.
Good luck.

HOW DO I GET OUT OF RECOVERY MODE?

Simple question, but seems to be hard to answer. Maybe nobody knows the answer. i have posted and posted time after time and no body gives me an answer. Go to clean up. ok been and done that. nothing happens. run pc scandisk. did it. nothing happened. connect to pc. did it. it does connect. i can get stuff off my nomad muvo 2 but for some reason
I CANNOT GET OUT OF RECOVERY MODE.
Could someone, anyone, give me a fricking straight on how to get the **bleep** out of RECOVERY MODE. I didn't spend $70 dollars on this piece of crap for it to not work.
So for the love that is all good and pure in the world, could someone please, please, getting on knees and begging for someone to help? And do not, and i repeat DO NOT REFER ME TO THE FRICKING RECOVERY MODE HELP THING, BECAUSE IT DOES NOT HELP. SO DON'T BOTHER TYPING THAT IN.

I have a Zen Micro Photo and have been frustrated for many weeks. Sometimes a certain sequence is the key to success. I tried everything to no avail. I could not even get the Zen to charge with my Computer or wall outlet. I was stuck in Recovery Mode Hell. Of course, my battery drained and you must have a charge to upgrade the Firmware or do anything else. I even ordered a new battery on eBay. In the meantime, I purchased a **competitor** MP3 player which is the absolute best I have ever seen. Anyway, I read the Post here suggesting you try a certain sequence---which I then tried---and it worked for me. Somehow, I was able to get a charge from my PC last night. Without being hooked up to the PC I did the sequence (it would get locked up in Recovery Mode as soon as I hooked up to the PC anyway). My PC would simply refuse to recognize the Zen Micro Photo no matter what I did. As suggested, from Recovery Mode I clicked on "reformat", and when it was done I clicked on "reboot"--which it did. I then plugged in the USB cable and to my extreme surprise my PC recognized the player! I had downloaded the correct firmware file so I clicked on it. It opened and asked me if I really wanted to install this Firmware update as my player already had this Firmware installed. Really? I did a Format and I thought I erased the Firmware. I told setup to upgrade the Firmware anyway--which it did. Suddenly, my player started "reloading" its Library! I now have a working Zen Micro Photo (and a new **competitor**). I transferred a few MP3's to the Zen and they play just fine. I am serious when I say I tried everything-----over and over again. The player just remained locked in Recovery mode. It was this certain sequence that worked for me and possibly may work for you. This was my last attempt before the trash bin. Prices have fallen drastically for MP3 players and quality has improved (**competitor**), but I am happy that I now have two working MP3 players. One of them is going on eBay---any guess which one?
**Discussion of competitor's product is not allowed in this forum - Richard

How do i get out of recovery mode without restoring on my jailbroken iphon 4? i ve tried tiny ubrella, recboot, redsnow etc.. idont want to lose my data base. thank in advance.

how do i can get out of recovery mode without restoring on my jailbroken iphone 4 (5.1.1)?? i ve tried with tinyubrella, redsnow, recboot etc.. plese help because i dont want to lose my database. thanks in advance..

Go elsewhere. Jailbreaking can't be discussed in this Apple forum.

I accidently deleted my voice memos on my iphone. i was using itunes on two different computers and my voice memos are gone. DOES ANYONE KNOW HOW TO RETRIEVE MY LOST VOICE MEMOS? PLEASE HELP!

itunes asked me if iwanted to erase all my files on my iphone when i connected it to my second computer.
i clicked yes
and all of my very important voice memos were deleted
however none of my photos were deleted...... and they count as files don't they?
anyway i need help on how to retrieve deleted voice memos
PLEASE HELP!!!

You should never try to sync your phone with more than one computer or you will lose your data. The pictures were not deleted because the sync process does not touch Camera Roll pictures (it only includes them during the backup step of the sync process).
If you had these voice memos on your phone when you last synced it to your first computer, and if you haven't synced to this computer since then, you could restore from the backup created during your last sync. This will replace the data on your phone with the data from this older backup so anything new will be lost. If you think that is the case, do not sync your phone again to the first computer prior to restoring from this backup or you will overwrite it and the backup will be lost. Instead, prior to connecting your phone to your first computer, open iTunes and disable automatic syncing by going to iTunes Preferences and on the Devices tab checking "Prevent...from syncing automatically". Then connect your phone and when it appears in iTunes on the left sidebar right-click on its name and select Restore From Backup and choose your last backup (containing your voice memos).
If you didn't have these voice memos on your phone when you last synced to your first computer, or if you have synced again to your first computer since losing your data, then your voice memos and other data are lost.

I recently purchased an HP officejet 6600 and whenever I put in the disk to install the printer nothing pops up. How do I run the disk on my 2011 MacBook Pro?

I recently purchased an HP Officejet 6600 and whenever I put the disk in to install the software nothing happens. How can I run the program to install it and get started using my printer???

You should be able to go to HP Web site and download the installer. It sounds like you got a bad CD.

I recently brought a HD PVR, i put in the disk to install the hard drive and it said " This program doesn't support DOS Mode! how do i get out of DOS Mode?? Please Help

Similar Messages

Maybe you are looking for