I recently done new update now my charger isnt compatabile on my iphone 5.Any ideas? It was working fine before update.
I recently done new update on iphone 5, now its not charging on my charger because its saying its not compatible and it was working fine before update.
are you using an apple branded charger?
i have heard ramblings that they built in incompatibility with UNauthorized chargers for safety reasons after all that happened in china.
Similar Messages
-
I can not uninstall the software either, I already tried that. When I click on the "add or remove" software, it automaticly thinks I'm trying to install it and says I cant install??
Thanks again kglad. I have walked through several of these and no results. When I launch InDesign in gives me the "Licensing has stopped working" But that is the only program. The rest tell me I may need to uninstall and reinstall the programs. They wont even try to start up. I believe the problem started when I tried to use the CC Cleaner tool. I believe it deleted something. It now gives me an error message:
The alias “Add or Remove Adobe Creative Suite 3 Design Premium” can’t be opened because the original item can’t be found.
When I try to open the Add or remove Adobe Creative Suite. So now at this point it seems I cant even "Uninstall" my software? Is that right? Sorry I'm pretty dumb with the whole computer thing really
Thanks again -
drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?
Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.
-
i had recently followed orders to restore my iPhone 3gs (iOS 6.1) from a question on apple support. However it was working fine before that, it's just that my phone didn't have signal. So it said to restore my iPhone and now it says that the Activation server is temporarily unavailable and when i plugged it into my mac, it said that i ddn't have a sim card installed. What can I do to fix this besides bring it to the store? it also bugs me because this answer was supposed to work but it just messed my phone up even more. This has already happened once and i had to take it to the store. What should I do to fix this? Thank you so much for all answers. i really appreciate.
no so i dont know what happened
-
I just updated my Mac Mini to latest software, tried updating GarageBand. It downloaded but now it gets stuck downloading the 'essential sounds and loops'. It always worked fine before I updated and would really appreciate some help. Thanks
I just updated my Mac Mini to latest software
You mean, MacOS X 10.9.2 and GarageBand 10.0.2?
How far does the download proceed? Do you get an error message?
Try to resume the download as described here: http://support.apple.com/kb/HT4485 -
So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke
Have not heard of that but here is what I would do - test after each step to see if the problem is solved
1. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
2. If that does not work - back up to iTunes and restore to factory settings
3. Check to see if the problem is resolved before restoring from backup -
Have a new imac OSx10.8.2, and when I connected my Epson Stylus pro 3880, loaded print drivers, and tried to print, the printer utility opened and then crashed; happened several times. Any ideas? (it worked fine on my older imac)
I believe so. the driver version I have is 8.64
The person gave me the instructions to reset the printing system and I followed it. That's what corrected the printing drop down windows.
I am also having trouble finding the downloaded icc profiles for the papers I use. I see them in the Color Sync Utility, but not in the drop down window for Color Management. There is a thread on this forum relating to that, but I don't understand how to "copy" the profiles and put them elsewhere. -
I have Geo Asian TV App on my IPad which was working fine before loading ios6. Now if try to run the video in this app, it says adobe reader or html5 required. Can you help
It may have used the YouTube app that is no longer included in iOS. Try downloading the YouTube app in the App Store and see if it works.
-
my iphone 4 is stuck in restore after updating the lasted version. It was working fine before.How do I get it working again?
Hello, fschris.
Thank you for visiting Apple Support Communities.
When experiencing issues updating or restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
I deleted duplicate files with MacKeeper and now my firefox only shows text. I have reinstalled firefox, java, and checked all of my settings. Any ideas? Safari works fine.
I opened iCal back up, all the dates were blank, so i started to type events into a date.
As soon as I started to double click a date to type an event, magically all the events in all the months reappeared.
I'm still puzzled why it acted this way and if I did delete something that caused it to act this way. -
I have an iPhone 3GS 16gb not jailbroken, that I just synced and updated to the latest fix. Before my google maps was working perfectly but since I updated it always gives me a current location that is about a half mile off in any direction. I have tried several hard resets to no avail. turning off my wifi, nothing. Turning off my location services-reset-then turn them back on, again nothing. Tried resetting network settings with the auto lock on never. Rebooted.. Nothing again..
Help!!! What's the score here? What comes next?yes, you can update to the latest iOS, that would be the first thing AppleCare would have you do
doing a restore and then putting your information right back on the device is not a troubleshooting step. If anything, you wipe out the issue and then have put it right back on your phone. It would be better to restore as new -
worked fine with 3.6
updated to 4
tried uninstall/install plugin
.dll downloads
disable/enable different plugins
next step is format?I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?
-
My iphone does not seem to be working with the av composite cable brought from apple store worked fine until update to ios 6.0.1 help
Ipod NANO, forgot to mention that.
-
iphone 4s need help battery not workin since uptade of ios7
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
I can't access any of my files, photos, anything form my external hard drive... It worked before now when I plug it in the light comes on, but it doesn't even show up as an external drive, so I can't access anything, I'm worried I have lost everything...
Huge mistake was only having ONE copy of your data OFF computer,
most people do it, and its just horrible and the typical reason for serious data loss.
Likely you have a very common failure (extremely common actually) called SATA bridge card failure, which would be "good" news,
read about same here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
Never again let yourself have LESS than 2 copies of your important data off-computer, ever
1. verify the external HD doesnt show up on another Mac
if same, you have about a 8 in 10 chance its SATA card failure.......... easy to fix.
The great news at the end of the tunnel of an apparently failed or failing external hard drive.
When checked on another computer, and with no need for spending money on data extraction expertise or software, the very likely case is that your external USB or thunderbolt HD is in fact fine, and merely the card interface, or SATA bridge card has failed or is failing. Keeping a HD dock around handy, or cheaper still a $20 hard drive enclosure or a SATA to USB connector can be a real life saver in getting your drive back to use, when the drive itself is fine, and merely its interface card has gone bad.
The SATA bridge card inside a USB external HD has a very high failure rate in general
Typical SATA bridge cards as seen inside a 3.5" external HD with power input (#1), and 2.5" SATA cards (#3, #4, #5)
What are the realistic odds your HD is perfectly fine?
There are no hard facts whatsoever, especially since so many people discard their assumed “dead/faulty” hard drives, but a good educated conclusion from years of examining and seeing this issue is that for hard drives made since 2010, and not dropped or generally abused, is that a minimum of 50% conservatively are perfectly fine! I personally estimate however that it likely approaches 60%+.
Considering how many external hard drives ‘fail’ (rather the SATA bridge more than half the time) each day, that is a very high number of perfectly fine HD that are tossed!
This is especially common with 3.5” desktop HD that are connected 24/7 with power and see a lot of data transfer. People wrongly conclude that “X” mfg. just made a defective drive, when in fact their 3.5” drives inside the plastic enclosure is 100% fine. I have personally seen well over 200 of these dead SATA cards and additionally seen 3 fail within a one hour span of doing a large data copies.
One of the very reason pros use bare HD as inserted into HD docks is not just the saving of space and the need for endless USB cables, but the elimination of the need for this high failure-rate part.
While the shapes and sizes vary somewhat on SATA bridge cards, they all serve the same purpose and have likewise failure rates
What exactly is the SATA bridge card in your external HD?
In the middle to late of 2009, most all external hard drives both in 2.5” and 3.5” reached the shelves in SATA III. These small SATA cards or "bridges" are used to translate between the hard drives’ interfaces and the enclosures' external ports (USB, Thunderbolt, Firewire). Additionally these small bridges not only transfer power but also of course the data. Unfortunately these SATA bridge cards have a very high failure rate as they are burdened with shuffle power and data.
Literally these little unreliable and fragile cards are the power conduits and the nervous system for all external HD data transfer.
SATA card as found inside a typical USB external hard drive
The assumption that the hard drive is bad when its not!
Countless 1000s of good external hard drives are thrown away each year because the owner thought the HD was bad when it fact it was the SATA bridge card which had failed. This card is removed in a matter of mere second once an external USB HD is cracked open from its plastic casing to reveal the bare HD and the attached SATA card which attaches between the HD and the USB cable.
To complicate this problem, even many computer professionals do not know that there is a very easy solution to the “failing or dead HD” issue since the hard drive itself is very likely just fine. Its astonishing that so many highly educated computer repair persons are unaware of this high-failure part, but this is mostly due to the fact that they do not juggle 100s of hard drives and know that of the iceberg that is a “external hard drive failure”, the mostly unseen majority are not a HD failure at all, but a bridge card failure.
To add to this great misunderstanding is the fact that people assume that "likewise symptoms seen on an external HD are the same as seen on an internal HD, therefore also the external HD must be bad". This is a compositional fallacy of logic. Since internal HD do not have a SATA bridge interface, to conclude similar symptoms "indicate the same failure" is misplaced and incorrect.
This is all not to say that HD do not fail, they do indeed, and I have seen many 100s of dead and failing hard drives. Hard drives even under ideal conditions have a life expectancy of around 4-8 years due to ferromagnetic depolarization from entropy. But of the mountain of symptoms that are seen as “hard drive failures” in comments, posts, and hearsay, half or more of these are not a HD failure at all.
Once your rescued hard drive is removed from the bad SATA card
You have several options, but the purchase of a $20 HD enclosure is one option, another is having a HD dock, however this eliminates the former portability in a 2.5" small HD.
Remember that 3.5” HD require power, which means you need either a HD dock, or a powered SATA card kit as seen at top left in the picture below. 2.5” HD get power from the USB port itself.
Just remember that the serious downside to the low cost external HD enclosures is THEY TOO contain these SATA cards, and what is worse the cheap ones will fail, often, much quicker than the original factory one did! In which case it is recommended you buy a quality HD USB enclosure
Rescue tools to use with your extracted HD for data recovery
Maybe you are looking for
-
Now what, how do you fix this???
-
Java.nio.channels.NonWritableChannelException
i have been facing this exception, please tell me how to remove it java.nio.channels.NonWritableChannelException here is my code import java.io.*; import java.nio.*; import java.nio.channels.*; public class abc public static void main(String arg
-
Can one put XP image on the second disk with "img"?
Hi all, We have a requirement to put in two IDE disks in the same machine and image the machines with different XP systems, each hard disk hosting one operating system. I was wondering whether Zen "img" utility allows for putting images on more then
-
Hi Folks, Actully im a technical consultant. Now I want to study Projrct systems. tell me the process flow of the Project systems. And also I need important transactions and Master tables. Please anybody guide me. Thanks for your valuable time, Point
-
Firefox crashes when opening email in gmail
Hello Whenever I open gmail and try to read my email FireFox crashes. This is happening with all accounts I have. I am using the MAC Version and on a MacBook Pro. Any advise will be great. Thanks