I recently downloaded iOS 6 and since then, my shortcuts for messaging no longer work, I've tried resetting it, and deleting and re-entering them.
I recently downloaded iOS 6 and since then, my shortcuts for messaging no longer work, I've tried resetting it, and deleting and re-entering them.
Use the yahoo app if available?
Similar Messages
-
I just upgraded to OSX version 10.8.3 and since then all animations are defective.
The dock is jerky!
The effects of opening and closing windows ranging in shots!
What should I do?You can check the status of your drive's indexing by clicking the Spotlight menu to see if there is a progress bar at the bottom of it, and can also open Activity Monitor and click the "%CPU" column to sort by CPU usage, to see if the processes "mds" or "mdworker" are currently active and using your CPU.
If so, then wait for them to finish. However, if not then try rebooting and then hold the Shift key immediately after you hear the boot chimes. This will load the system into Safe Mode, which should run some checks and maintenance routines on the system. Then reboot normally to see if the problem persists.
How much RAM do you have installed on your system? You can see this by choosing About This Mac from the Apple menu. -
i have changed my payment method with another and since then it dose not except the new payment method i tried another one same thing is happing
What payment method are you trying to use? Prepaid debit cards by chance? Apple does not accept prepaid cards.
-
Hi i just had my imac hdd replaced and since then ive had nothing but problems...i cant find imovie iphoto or anything and i followed the steps mentioned on here go in app store and buy but my account wont be charged...but it did...can someone pls advise.
Hi i've done everything that i was advised on...and also another problem i tried to restore my mac and it keeps sayin disk erase failed couldnt unmount disk!...i'm so angry i swear....someone somewhere dont know what they doing....
-
I've upgraded my imac to mountain lion and since then I havetroubles with my networkconnection
Please carefully read iMac SMC and PRAM reset for correct instructions on how to reset the SMC, do this 2x back to back.
-
Like I've said, I've done everything to get it to work again and the screen just shows white lines, or it starts up and the screen fades away to black. It's not water damage, or anything like that. I haven't dropped it. It's since the last update, last night. (for me I did it late)
Will apple replace this for me or is it not covered?The iPhone includes a one year warranty.
If this is determined to be a hardware failure that is covered under the warranty, it will be exchanged under warranty. -
I don't know how to get to the crash ID since I can't get into the Firefox window to go to 'help'.
The crash report details:
AdapterDeviceID: 0322
AdapterVendorID: 10de
Add-ons: [email protected]:1.0,{972ce4c6-7e08-4474-a285-3208198ce6fd}:6.0.2
AvailableVirtualMemory: 2043473920
BuildID: 20110902133214
CrashTime: 1316129359
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1315428336
Notes: AdapterVendorID: 10de, AdapterDeviceID: 0322, AdapterDriverVersion: 5.3.1.6
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 95303
StartupTime: 1316129351
SystemMemoryUsePercentage: 91
Theme: classic/1.0
Throttleable: 1
TotalVirtualMemory: 2147352576
Vendor: Mozilla
Version: 6.0.2
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
RSVP UDP Service Provider : 6 : 2 : %SystemRoot%\system32\rsvpsp.dll
RSVP TCP Service Provider : 6 : 1 : %SystemRoot%\system32\rsvpsp.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{1A17B1B8-0476-4031-98B2-13100AC671BC}] SEQPACKET 4 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{1A17B1B8-0476-4031-98B2-13100AC671BC}] DATAGRAM 4 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{DD1B74E0-8FEF-4EF5-B109-2CA4631682AC}] SEQPACKET 3 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{DD1B74E0-8FEF-4EF5-B109-2CA4631682AC}] DATAGRAM 3 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{469CBEE7-DE58-4D0C-BA40-FE44EC78F932}] SEQPACKET 0 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{469CBEE7-DE58-4D0C-BA40-FE44EC78F932}] DATAGRAM 0 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{2E33DF80-687E-463A-A98D-C8332CE564C9}] SEQPACKET 1 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{2E33DF80-687E-463A-A98D-C8332CE564C9}] DATAGRAM 1 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{EB416DA2-FDC7-4A17-9FAF-C6536909FD4F}] SEQPACKET 2 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{EB416DA2-FDC7-4A17-9FAF-C6536909FD4F}] DATAGRAM 2 : 2 : 2 : %SystemRoot%\system32\mswsock.dllCreate a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
* https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes
* https://support.mozilla.com/en-US/kb/latest-firefox-issues
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
See:
* http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
* https://support.mozilla.com/kb/Mozilla+Crash+Reporter
* https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report
<br>
Firefox 8
* getfirefox.com -
Shortcuts for messages don't work after iOS upgrade
After having upgraded to the most recent iOS, my shortcuts don't work in messages and mails anymore. Has anyone else had the same experience?
Well, it's telling you that the datset doesn't exist. From the help in 4.7:
OPEN DATASET
Addition 1a
... FOR INPUT
Effect
OPEN ... FOR INPUT opens the file in read mode.
If the file does not exist, OPEN ... FOR INPUT fails with Return Code SY-SUBRC = 8.
Note
If OPEN DATASET is not executed in a Unicode program and if the user has write authorization for the file, the file is opened in read and write mode. Otherwise, it is only opened in read mode.
Rob -
OS- Windows 7
Upgraded from Firefox 3. I tried updating to FF 4 a while ago and had the same problem, so I went back to 3. Decided it was time to upgrade and the problem recurred. Please help!Try to modify the pref <b>ui.trackpoint_hack.enabled</b> on the about:config page from the default value -1 to 0 or 1 to see if that makes the scroll pad work.
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean) -
I upgraded to 10.6.8 and since then can't print
I upgraded to 10.6.8 and since then get the error message library/printers/ EPSON/Inkjetprinter2/ filter./rasyertoescpll.app/Contents/MacOS/rastertoescpll failed. I've renewed the permissions, reset installed printers, reinstalled the printer driver, still won't work. HELP!!....
I upgraded to 10.6.8 and since then get the error message library/printers/ EPSON/Inkjetprinter2/ filter./rasyertoescpll.app/Contents/MacOS/rastertoescpll failed. I've renewed the permissions, reset installed printers, reinstalled the printer driver, still won't work. HELP!!....
-
i recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.
fingers crossed, it appears they are working the bugs out of this update....i was able to post a pic to my newsfeeds/time line this morning....first the picture went into the ios album but within a minute, it appeared on my timeline! im glad ...
-
I have recently restored my phone to unlock it. I have installed the latest version of IOS. Since then, I have not been able to play the music I have purchased. The scrolls or flips through the songs and I am unable to listen to them. Can anyone help?
iTunes is quite friendly, and very powerful.... You probably just need to set up automatic syncing in iTunes.
If the iTunes sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar. The iPod appears in the sidebar, under DEVICES. Select the iPod there.
To the right, the iPod's Summary screen is shown. Toward the top, there is a bar of buttons, starting with Summary. Click on Music next to Summary. This Music screen is where you tell iTunes how to sync songs to the iPod.
Check the box for Sync Music. This setting enables automatic syncing for music. If your iTunes music library is small enough to fit on the iPod's storage, you can choose to sync Entire music library. Otherwise, you can choose to sync Select playlists, artists, albums, and genres. From the lists below, select (checkmark) what you want to sync to the iPod.
Here's one convenient way to set this up. In your iTunes library, create one or more playlists. Add the ALL the songs you want on the iPod to those playlists. OR, you can use existing playlists. Back on the iPod's Music screen, select those playlists under Playlists. (You can select other items on those lists, if desired.)
When you click Apply, the songs in your selection sync to the iPod. Going forward, to update your iPod (add/remove songs), just update those playlists in your iTunes library. The iPod does not need to be connected. The next time you connect the iPod (or click Sync if already connected), iTunes automatically updates the iPod with the same changes.
NOTE: On the bar of buttons that starts with Summary, click on the other buttons (such as Movies, Podcasts, Audiobooks, etc.) to set up syncing for those iTunes media categories. -
What antivirus protection should I purchase for my MacBook Pro? MacSecurity.app appeared on my desktop, and I downloaded that. Since then, it has said my computer is infected and pop-ups have been appearing.
You've been infected by a scam trojan. You don't need any anti-virus software on your Mac. See the following about getting rid of the trojan.
Trojan War
If you discover a trojan program is running on your computer then look to the following information for assistance:
1. A recent discussion on the Apple Support Communities: MacDefender Trojan.
2. An excellent site devoted to Mac Malware: Macintosh Virus Guide
3. Another site for removing MacDefende, et.al.: MAC Defender Rogue Anti-Virus analysis and Removal
4. A new removal utility - MacDefenderKiller
Removing strange software can be a task. The following outlines various ways of uninstalling software:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a Startup item or a Log In item. Startup items are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the Delete [-] button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Note that you must have this software installed before you install software you may need to uninstall. Uninstallers won't work if you install them after the fact. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them and others at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQs on removing software and dealing with spyware and malware.
After removing all the components of the software you may have to restart the computer to fully disable the software. This will be the case when removing software that has installed a daemon. After the daemon has been removed you need to restart the computer to stop the daemon. Alternatively, you can kill the daemon process using the Terminal application or Activity Monitor. -
I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy and it is telling me so. Can any one help please?
Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
In fact there's a new one for HP at the top of the list just now.
You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc. -
I recently downloaded Ios 7 and all the songs that i have purchased before, but deleted off my itunes because i didn't want them, showed up. I don't know how to delete them off my ipod and i really don't want them there. Is there a way to get them off? The songs dont show up in my itunes on my computer, just on my ipod with a download button next to them. I don't want them there anymore because i don't like that kind of music anymore and i don't know how to get them to go away.
There is a similar setting for Videos on that Settings screen, so if you leave that 'on' you may have similar happening in the Videos app
Maybe you are looking for
-
I have the brand new X1 Carbon with the WQHD display. I wiped the drive and installed Ubuntu Linux 13.10. Everything works perfectly. Sound, WiFi, camera, trackpad...all running fine with no issues. I also have a new T540p running Windows 8.1. When I
-
Streaming and Delivery using Quicktime Pro software.
I was reading the tutorial about Streaming and Delivery with the Quicktime Pro software. I have questions around the steps that are listed to be taken in order to create a streaming video. Here are a list of the steps and the link to this website pag
-
Unconfirmed Line items in Sales Orders in TP/VS
While doing TP/VS process and moving the shipments from C to D status, certain shipments do not move to D status due to the reason that there are unconfirmed line items in the orders and are not converted to deliveries, thus preventing shipment statu
-
Business area in asset retirement
Hi, While retiring the asset(t.code F-92), we get an error message "Account assignment not possible (Asset not assigned to a business area)". But in asset master(time dep tab), business area is assigned to the asset. The version is 5.0. What should b
-
Is there any way to upload iWeb files updates only with a 3rd party ftp program to a new hoster, e.g. Godaddy? I see no posts newer than 2007.