I recently go my screen replaced and it has worked since then. But now all a sudden the screen does not light up. I know my phone is on because Siri is still responsive if I hold the home button, I just can't see anything. Any suggestions?
I recently go my screen replaced and it has worked since then. But now all a sudden the screen does not light up. I know my phone is on because Siri is still responsive if I hold the home button, I just can't see anything. Any suggestions?
Most likely the LCD Display connector simply came loose from its logic board connector. Take iPhone back to where it was repaired, and ask them to simply press the connector back into its place. Ask them to apply a bit of foam material or several small pieces of tape on top so the pressure of the flex connector plate holds it properly in place for the future.
Similar Messages
-
My daughters iPod touch does not turn on even after hooked up to charger for over 24 hours. Tried to hold the power button and home button at same time for 10 seconds and still did not turn on.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???
This sorted it for me:
Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up. -
"Your session has timed out, try again." is the message I get every time I try to purchase a song. My last purchase was june of this year, and nothing has changed since then.
I had this problem, but it was because I was clicking on an external link. Try instead going straight into iTunes, then going to the Podcast section. At the bottom of the "Podcast Quick Links" section, there's a text, "Submit a Podcast." Click on this instead. Once I did, I got to the same page as before, but it did process the feed.
Good luck! -
When importing CDs into i-tunes should the artwork be there automatically. If not how do I get artwork to show in i-tunes and on my ipod. I had artwork with a PC but now I have a mac artwork does not appear.
I don't use iTunes's "fetch artwork", so I'm not 100% sure, but unless you are signed in to your iTunes account, artwork is not automatic. Even then, iTunes doesn't always find it.
You can copy-and-paste artwork from the inernet, either Amazon or Google. I use 300x300 pixel images.
For the future, if you have iTunes questions, you might be better off posting them in the iTunes for Mac forum, this is iTunes for Windows. In this situation, it doesn't make any difference, but next time maybe it will. -
I purchased a program on Mac App store and the program does not act as it should, also was required to pay up front whereas had I went to the web site, ibank 4 I would have had 30 days free trial an would have found that the program does not work.?
Free trials are not available through the Mac App Store.
Apple is not here. Apple does not answer questions here. This is a user to user support forum. There are only folks here who use Apple products. -
how is my laptop working even though I spilled iced tea on it? The keyboard does not light up but works normally, and everything else seems to be in order! The front of the bottom is hot while the rest if mildly warm. I don't know if its going to have a problem in the future. I wiped off as much as I could with a cloth and left it open and upside down for 10-15 minutes. Any idea if I am in the clear?
Please make a Genius Appointment and take it in for service. Do not wait.
-
I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port. The MacBook recognises the camera immediately. Can anyone help?
Thank you for your reply. I know I can use a card reader however I don't see why I should when importing directly from my camera has worked reliably for years. The process I use is simply connecting the digital output from my camera to the USB port on the iMac, which has previously automatically opened iPhoto ready for the import. Now all of a sudden my iMac does not recognise the camera. However if I connect in the same way to my MacBook then iPhoto opens automatically on the MacBook, recognises the camera and is ready for importing. So whilst I know I can use a reader, or my MacBook I want to use my iMac in the same way that I have for years. I can only assume that the settings on the iMac may have changed, but I cannot verify this.
-
Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.
Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.
Sometimes this happens, because the camera is not properly charged. In that case connect the camera to a charger or use a card reader. -
I keep getting a pop-up WEBKIT 2 WEB PROCESS.exe has stopped working and then I can't do anything -- any suggestions as to how I can get rid of this one?
but i using safari on windows7.Uninstall Safari and reinstall:
Safari 5.1.7 for Windows - Support - Apple
If this doesn't work, I suggest migrating to a different browser given that: Farewell Windows Safari, as Apple excludes its homegrown browser ... -
My iPhone 6 panoramic camera does not work properly: the arrow does not turn when i turn my phone. Furthermore sonetti da my Keyboard does not turn as well. What do you think si the problem?
Furthermore my keyboard does not turn sometimes as well
-
iPhone 5s won't turn on after this update. Battery was at 98%, tried holding sleep & home button while plugged in, no good. Any ideas?
P.S. I just noticed; when I hold the power and home button at the same time while it's plugged in as if I was going to restart it, my computer acts as if I'd plugged it in again (it makes the USB notification sound, itunes opens up again, I get the same "your iphone is in recovery mode" message, etc.), but that's the only response I've been able to get from pressing anything on the iphone. thanks again.
-
I upgraded from an iphone 4 to a 4s, after a few initial problems and two restores, everythings seemed to be working...until I went to play some music, all music loaded to itunes via CD's played, but ALL purchased music from itunes does not play...i click on the song and the screen flashes to the image then goes back to the list of songs, so the purchased music shows up...just does not play. Can anyone help resolve this problem? Thanks!
here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
Siri seems to behave properly with scenerio above---sans call button. She does not go to lock. -
My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything
Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)
-
pourquoi lorsque je charge un projet sur cs4 il apparait,mais dés que je clique sur une fonction mon écran devient blanc et le logiciel ne répond plus?je travaille avec ce logiciel depuis 2008.Merci de bien vouloir m'éclairer.André
Nobody can tell you anything without proper system information and other details.
Mylenium
Maybe you are looking for
-
Error (ORA-01403) saveing data form a report with apex_item items
Hi all, I've a problem saveing data that's inserted into a report which I created using apex_item items. Reproducing the exact issue on apex.oracle.com will take me a lot of time, and I don't know if I really can reproduce this matter... So I hope I
-
SAP NetWeaver 7.01 ABAP Trial Version: AMD Processor
When i try to install i got the following warning : You started an installation of software for platform I386, but SAPinst is running on platform AMD64. Will that have any impact on the installation process ? Thanks for any answers ..
-
Width of table column in a JTable
I am not able to set the default width of table column. To set the width I need to call setPreferredWidth(), setMaxWidth() setMinWidth() but after doing this I can not resize the column Any clue what I am doing wrong.
-
Hello All, I am using Oracle 10g RAC. I facing some dead locks in the db, I checked the alert log for both instances and i did not find any ORA-00060 error. Is there other ora error to search it inside the alert log to check dead locks for RAC enviro
-
BI template calling a BSP to get a value
Hello, I have a BI web template in Netweaver 2004s. I click on a link_item that calls a function in the script_item to open the BSP. Also in my template I have a holder for an input field: <label for="description" > Fiscal period: <input id="descript