I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ? or can you run both versions on OS10.9.5 ?

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

Similar Messages

I recently got new mac air and transfered my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record shows its recieving sound from software inst. but no sound. I checked audio preferences OK

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ?
thanks,

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

Powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem. Now when I open Keynote on my iPad there is nothing. I could use some help with this problem.

powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem. Now when I open Keynote on my iPad there is nothing. I could use some help with this problem.

Morning AndreD86,
Thanks for using Apple Support Communities.
These articles explain exactly what is backed up by using their method.
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
and
iCloud: Backup and restore overview
http://support.apple.com/kb/ht4859
Also we want to double-click the Home button and swipe the Task Bar to the right.
Then make sure the button on the far left of Task Bar is not muted.
Best of luck,
Mario

I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Do you know a fix for this?

I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Does anyone have a fix for this?

I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Does anyone have a fix for this?

How can I get my new mac air to recognize my old iPod nano?

My new mac air does not recognize my old ipod nano. How can I fix this?

Hi nainmom,
Thanks for visiting Apple Support Communities.
I recommend starting with these steps if your iPod nano is not recognized by your Mac:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Best,
Jeremy

In VB6, why is the "GPIBNotify sub" (from the GPIBNotify AtiveX Ctrl) all the time called even if no Event happened? This callback function is started then stopped permanently as if its received SRQ from the GPIB Bus. Any ideas?

I'm programming in Visual Basic 6 to communicate between a computer and HP Measurement Devices (BER-Meter) with GPIB. I have already read information and code for this. My platform is W98. The NI488.2 commands can be sent without any problem between the equipements. However when I'm using the GPIBNotify ActiveX Control to use the callback function, there is a permanent starting and stop of the GpibNotify Sub. The SetupMask and RearmMask are set to RQS and the HP Device is well configured. Moreover an oscilloscope measuring the 10th line (SRQ
) of the bus didn't show any pulse on the line behalf the right one. Any Idea?

Hello-
So, the SRQ is not detected by the oscilloscope? It must be a setting that is not correct with the instrument. Try contacting the manufacturer of the instrument for details about SRQ's. The GPIBNotify ocx will not be able to react to an SRQ if there isn't one.
Randy Solomonson
Application Engineer
National Instruments

I copied emails from aol in 2001 to my ibook, then transferred those documents to my G5 and saved it to my sdmi. Now i cannot open them. Can anyone help me on what to do how to retrieve and/or convert these documents?

I have very precious letters I wrote and I want to retrieve them from 2001. Is there any way? Thanks for your help.

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

My new iPhone 4 has no button to add calendar events and downloaded games apps make a whining noise when I open them. Any help welcome

Got an iPhone 4 yesterday and cannot add events in calendar. There is no + button and have searched in settings but cannot see how to do it.
Also downloaded game apps open with a whining noise that lasts for about 30 seconds plus. Had to turn volume off as its very annoying. Any help please

Did you try updating the firmware or resetting all settings
at: Settings -> General -> Reset -> Reset all settings?
It will not remove any data, just settings and things like ring tones etc

I just did a software update and iPhoto was on that update. Now, when I open iPhoto app, I get this message:Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may ta

if I click Upgrade, will I lose my photos (over 10,000).

OT is correct. I was a little freaked by that message a few days ago... especially after spending time reading people's freak outs about access to data after making the iCloud switch. But since I had a backup copy on two other drives, I went for it because I could see no alternative.
Update went through, and all my photos are still there

I have loaded photos from two ipad1 on to my ipad2 . They were ok originally but now when I open them that are pixelly. Any ideas ?

Can anyone shed any light on pixelly photos from other iPads

That combination of problems points to a possible issue with the file that stores history and bookmarks. See http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

HT3805 I recently upgraded to mavericks on iMac . now when i open aperture I get the message"aperture cannot access this library. to use this library, make sure its file permissions are set correctly" I have repaid permissions via the aperture first aid.

I repaired the permissions in aperture first aid. I notice my short user name has changed from the one before the mavericks upgrade.

I notice my short user name has changed from the one before the mavericks upgrade.
Then you created a new user account when upgrading. How did you upgrade? Did erase the system and set up your mac completely new? If your short user name has changed, you are no longer the owner of your Aperture library, if it ha been created with your old user name.
I repaired the permissions in aperture first aid.
And after repairing the permissions you can still not access it?
Where is the library located? On an external drive or in your Home folder?

HT1923 I am using windows 7 and have upgraded itunes to 11. Now when I open my music library in itunes and click on a song it says "original file could not be found" Over 2000 songs come up this way and locate does not seem to work. Before the upgrade all

With Windows 7 I upgraded itunes to 11. Now in my itunes library, when I click on a song "original file could not be found" comes up. This happens with over 2000 songs, but it seems to be ones I recorded from cd's. Locate does not seem to work. Has anyone else had this problem?

Highlight a song that is supposedly missing, press CTRL+I to Get Info, say no when asked to locate the file, then look at the summary tab. Where does iTunes "think" the file should be? Where is it really? You may need to give a configuration file a minor tweak.
tt2

HELP !!! how to hear a simple sound from software instrument ????????

It's a simple question, but I lost half an hour to find a button to hit play and hear one single sound from software instruments, but no success. I saw the video tutorials and they skip the basic.
Very frustrating, I think I will have some difficulty in understanding how this program works.
I cannot do nothing with it, besides adding chapters and songs from itunes.
I need to take a course in Garage Band.
I found it. It's a keyboard.
Message was edited by: Pedro Santos

http://seminars.apple.com/seminarsonline/garageband/apple/index1.html this is a helpful seminar with 3 videos you can watch a 31 minute & 22 min & 16 min, they should help watch them over & over

My iTunes won't update on my computer. I have windows vista. I can open iTunes and when I click "check for updates" it asks if I want to update to iTunes 11.1.5 and I click "Download iTunes" but then nothing happens. What's wrong?

My iTunes won't update on my computer. I have windows vista. I can open up itunes and when I click on "check for updates" it asks if I want to download iTunes version 11.1.5 and I click "Download iTunes" but then nothing happens. Sometimes uptop the loading bar will appear but for only a split second. I have tried restarting, shutting down, I cannot figure out why it won't download. What's happening and how do I fix it?

Try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

I have a monthly subscription for PS and Lightroom. I upgraded to 5.7 this morning but not through CC as it wouldn't download. Now when Lightroom opens, it is asking whether I want to but or have a free 30 day trial and won't progress any further into the

Help please? My first time on this forum so apologies if I boob in some way!
I have a monthly subscription for PS and Lightroom.
When I opened Lightroom this morning, it told me an upgrade was available through CC. I probably did something wrong, butI couldn't get it to download.
I came on the forum and read a couple of discussions on your pages and found a reply that posted links to the pages where Lightroom 5.7 could be downloaded.
I clicked the link and downloaded the update fine.
However, now when Lightroom opens, it is asking whether I want to BUY or have a free 30 day trial and won't progress any further into the app.
My CC icon reveals that my software is up to date but I can't get past this register screen, without selecting BUY or FREE 30 TRIAL .
can anyone help please?

Help please? My first time on this forum so apologies if I boob in some way!
I have a monthly subscription for PS and Lightroom.
When I opened Lightroom this morning, it told me an upgrade was available through CC. I probably did something wrong, butI couldn't get it to download.
I came on the forum and read a couple of discussions on your pages and found a reply that posted links to the pages where Lightroom 5.7 could be downloaded.
I clicked the link and downloaded the update fine.
However, now when Lightroom opens, it is asking whether I want to BUY or have a free 30 day trial and won't progress any further into the app.
My CC icon reveals that my software is up to date but I can't get past this register screen, without selecting BUY or FREE 30 TRIAL .
can anyone help please?

I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

Similar Messages

Maybe you are looking for