I recently had a repair...

Hello everyone,
Today I got my iBook G4 back from an AppleCare repair and I had a problem. The system ran perfectly until I came across a problem. When I had my laptop repaired, the problems were:
* No power
* Disc stuck in drive
And I put a DVD in my combo drive and it wouldn't accept it and would eject. I opened DVD player and it said "A valid DVD drive could not be found". I have a combo drive though (CD+RW/DVD-R). Can anyone help me? I need my laptop for a project this month, so I have no time to return it to get repaired again. I think Apple didn't run diagnostics with the disk drive. Any ideas?
Thank you.

If you just had a repair you need to contact them and tell them that there is a new problem which might have been caused by the repair.

Similar Messages

I recently had some repairs done to my ATT U-verse connection, and now my Safari doesn't open in a full screen. How do I reset that to open in full screen?

I recently had some repairs done to my ATT U-verse connection, and now my Safari doesn't open in a full screen. How do I reset that to open in full screen?

Mountain Lion is set up to close windows when you quit a program instead of saving them. To change this, put Safari in full-screen mode, move the cursor to the top, open Safari menu while holding Option key and close Safari from the menu.
If you want to do it automatically with all programmes, open System Preferences > General, and deactivate "Close windows when quitting an application"

I recently had my iphone 4s screen repaired because the screen was cracked. It was all ok and then a few weeks later something strange happened. My touchscreen works, but the screen doesnt show, you can see the light in the background but no picture?

I recently had my iphone 4s screen repaired because the screen was cracked. It was all ok and then a few weeks later something strange happened. My touchscreen works, but the screen doesnt show, you can see the light in the background but no picture? has anyone got any ideas as to what the problem is, is it self-repairable or even repairable at al?

The LCD Display connector has partially come loose from the logic board connector, and simply needs to be pressed back down into place. Or the front screen assembly is now faulty, and needs to be replaced again.

HT203164 playlist to cd burn failure. message stating unable to find cd burn program appears!? recently had HP pavilion laptop repaired for fan overheating prob & wonder if repair job erased cd program? HELP please!? am techno-challenged, old & not afflu

tried to burn playlist to CD but saw message stating unable to find CD burn program!? recently had repair company do replacement of cooling fan & need to know if this is the cause?? am OLD techo-challenged lover of music & am desperate for good free advice! PLEASE HELP! i only know enough about computer systems to be dangerous to myself and them!

i went to the HP site, read thru & viewed video instructions, went to device manager as well as HP assistant & followed all the instructions (hopefully?) but all i accomplished was killing some time as i waited for the next winter storm! am afraid to do their HP recovery disk that i made on my first HP day because i had to have geek squad make changes last year due to other connectivity issues & am hesitant to undo all their work i had paid for! hoped that HP assistant program would just discover prob on its' own! device manager took me to view of all components but nothing just simply says "this is your optical/cd drive program". am greatful for fact you tried to help, my friend, shows you have admirable and altruistic qualities!.computers have always been too unforgiving when it comes to my trying to enjoy them! too bad i don't know name of device that governs cd-drive. thank you for wanting to help me out.

TS4036 I recently had to send my iphone off for repair and when it came back they had restored it t factory settings. Is there any way I can get my music and photos back from icloud ??

I recently had to send my iphone off for repair and when I have got it back it has been reset to factory settings. Can I get my phonos,music etc back through icoulds ?

If your backup is incomplete you won't be able to use it. Do you have any backups on your computer? (You can check by opening iTunes and going to iTunes>Preferences>Devices (Edit>Preferences>Devices on a PC). That will list any available backups on your computer.

I recently had my Imac repaired and had snow leopard and now I cannot get Icloud?

I recently had my Imac repaired and had snow leopard and now I cannot get Icloud?

To use the features in iCloud you need to upgrade to 10.7.3 (Lion).

TS2518 I recently had to get a new hard drive on my MacBook Pro because of a crash. I was able to restore to my latest backup, but now when I need to upload to an application like DropBox, iMovie, and such, it won't acknowledge Aperture. I have Lion OS.

I recently had my hard drive crash on my MacBook Pro (OS Lion 10.7.5). I was able to restore my new hard drive from my latest backup, but since then have been unable to access Aperture Library from another application. When I 'request' an upload --- like to Drop Box, iMovie, or anything --- and it drops down the window for you to choose which library you want to choose from, Aperture is not acknowledged. It will show my iPhoto Library and Photo Booth.
I can export from Aperture to Facebook and Flicker, but not from the other direction. Any ideas on how to resolve this issue?
Thanks,
Brenda

Brenda,
Do you mean, the Media Browser is not showing the Aperture Library? What version of Aperture 3 do you have, and where is your Aperture library stored, on your system drive or an external drive?
For the Aperture Library to be visible in the Media Browser you need to have enabled the generation of previews in the Aperture "Previews" preferences. Do you have the option enabled "Share Previews with iLife and iWorks"? And have you the generation of previews enabled?
One other reason for Aperture not showing in the Media Browser could be a corrupted Aperture library. I suggest you try the "Aperture Library First Aid Tools" and repair your Aperture Library. Start with reapairing permissions, then try the other options, if necessary. See:
Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
Another reason may be a corrupted preferences file; remove your Aperture preferences from your User Library, see Aperture 3: Troubleshooting Basics, the paragraph on removing preferences.
Regards
Léonie

I recently had a Hard drive failure, got the flashing question mark

Hello,
I recently had a hard drive fail on my IMAC. The power went out in my home and knocked the computer off. When I turned it back on I go the dreaded white screen with flashing folder/Question mark.
I tried all the tricks I could find (on my other computer search) but nothing worked. I also inserted the install disk and then tried the "disk utility" ... this is where I got really scared...the utility saw my Hard Drive, but showed nothing on it with 0 space available. I thought I was fried and actually ordered a new hard drive online. (This is the second time in 3 years this has happened ... and wouldn't you know my extended warranty expired 2 weeks ago)
The next day, I think ... well, let me just try booting up to see if a miracle will happen. Low and behold it booted up! My drive is there, all my data everything! (and a new hard drive on the way overnight! lol)
So my friends, what the heck is going on? I immediately repaired permissions once I brought it up. But I'm afraid to shut the thing off now in fear it won't come back.
Any Ideas?
Thanks,
Ryan

Assuming you have some backups:
Drive Preparation and OS X Installation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.
If the drive is not failing then the above process will find any possible bad blocks. If no bad blocks are found and the drive reformats, then reinstall OS X. If the drive does fail and you have another you can install, then try that. If this doesn't fix things then take it in for service.

I recently had a kernel panic in which I think my hard drive only had so much space left after I ran a bunch of drivers I thought I needed. I uninstalled all and moved files. For some odd reason I'm not getting sound of of my hdtv/monitor.HELP?

I recently had a kernel panic in which I think my hard drive only had so much space left after I ran a bunch of drivers I thought I needed. I uninstalled all and moved files. For some odd reason I'm not getting sound of of my hdtv/monitor.HELP? I uninstalled all the drives and apps I download. I moived files either to trash if not needed, and others to other external drives. I went into disk utility and did a repair disk permission and verify disk. Clean out junk files. Now my hdtv/monitor does not give me any sound, nor does my mac mini. Can someone please tell me what to do?

What drivers?

HT203175 My Windows XP recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes." I have never had problems in the past. Is this a real m

My Windows XP software recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes."
I have not used iTunes for several weeks so the issue may not be related to the last Windows XP automatic upgrade. I have never had problems with iTunes in the past. Is this a real message or perhaps a virus?
Before I reinstall iTunes, any thoughts?

It's a real message.
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

Does the power cable from my 24" CinemaDisplay have to connected for the display to work. I just had it repaired and now it seems to have to be plugged into the laptop I dont remember it being like that before.

Is the power cable from the display required to be plugged into my MBP for my display to work. Recently had work done on the display (power supply replaced twice, glass replaced twice). Also since I got it back from repair my system goes to sleep sleeps even though I have it set not to. Frustrated

awesome, so you sound like you know what your going on about. im guessing its a Software fault tbh, because its like the phone is dead.. very upsetting..but with it not being the screen if they dont ask me to replace it and to send it off for repair what can i say as to a loan phone, mind a ease a little bit now i will just now wait for tommorrow to see what happens thank you

HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. Any clues?

I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. I only have a previous version re-install disc as I bought the latest OSX off the app store. Any help gratefully received?

Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

We recently had a few brief power failures. Since then, my Mac Pro has been very slow on start up. Any suggestions?

We Recently had a few brief power failures. Since then, my Mac Pro has been very slow on startup. Any suggestions?

Like the man says:
Run Disk Utility > Repair ... (not just repair permissions) while booted from another drive. If you have a stronger utility like Disk Warrior, that would be even better.
If you find that the ONLY way you can do this is by booting from the DVD, The Hatter recommends you establish an emergency drive or partition on a drive other than the Boot drive and use that in the future. It makes emergency Repair, backup, and cloning much easier.

I recently had my iPhone 5c screen replaced. When I switch the phone on all I can see is a dark blue/navy backlight on the screen. The phone powers on although I can't see the apple logo. I can ring the phone a bad Siri is fully functional.

I recently had my iPhone 5c screen replaced. When I switch the phone on all I can see is a dark blue/navy backlight on the screen. The phone powers on although I can't see the apple logo. I can ring the phone a bad Siri is fully functional.
I Have tried to soft rest it but it does not work.
can anybody help?

Belly114 wrote:
Unfortunately because you have violated the warranty - it will cost £216.44. See https://www.apple.com/uk/support/iphone/repair/screen-damage/
Unfortunately, since an unauthorized party opened it, Apple won't have anything to do with it at all. It's not eligible for an out of warranty replacement.

I recently had my cracked iPhone 4 screen fixed, the lady who did it told me my light sensor was broken.. How can I get a new one installed??

I recently had my cracked iPhone 4 screen fixed, the lady who did it told me my light sensor was broken.. How can I get a new one installed?? i noticed there was something wrong when I talk on the phone it will mute, hold or speaker the calls. It's very annoying how can I fix the light sensor

Was your cracked screen fixed by an Authorized Apple Service Provider? I may be wrong, but I didn't think they fixed such things.
Regardless of who fixed it, and whether it was an authorized repair or not, I recommend bringing it back to the agency that fixed it in the first place. But note if the repairing agency is not authorized by Apple, you may not want to spend much more money on repairs there for this unit.

I recently had a repair...

Similar Messages

Maybe you are looking for