I recently had to have a migration done. Since then I keep getting a message on my calendar: "The server responded with an error."   Its been asking me to check my ID and password, which I did not change.  What do I do to correct the problem?

I recently had to have a migration done on my Mac Desktop. Since then I keep getting this message on my MacBook regarding my calendar: "The server responded with an error."   Its been asking me to check my ID and password, which I did not change.  What do I do to correct the problem?

That's probably the MobileMe or iCloud password. 
Go to System Preferences > Mobile Me (or iCloud).  If you're not logged-in, do so.  If you are, log out and back in again.

Similar Messages

  • MY calendar screen on my MacBook Pro is locked up will not let me close. "The server responded with an error" I have tried force quit, and shutting of the computer.

    My MacBook Pro 15in mid 2010 4gb 1067, 2.4gighertz i5, os 10.9.5 has locked up the calendar screen displays "The server responded with an error" and will not let me exit the msg or the screen I can use the rest of the computer.  I have turned of the computer, force quit and other things.  I tried to send a Calendar by email

    I tried your suggestion but it did not work (hold shift down when re-launching calendar). Here is the message I keep getting. Help - this endless loop prohibits me from accessing any calendar functions.
    The server responded with error.
    Access to account “Google” is not permitted.
    The server responded:
    “403”
    to operation CalDAVAccountRefreshQueueableOperation.

  • The server responded with an error.  Access to "Don Weist/Winhall" in "Work" in account "iCloud" is not permitted.  The server responded: "403" to operation CalDAVWriteEntityQueueableOperation.

    "The server responded with an error.
    Access to “Don Weist/Winhall” in “Work” in account “iCloud” is not permitted.  The server responded: “403” to operation CalDAVWriteEntityQueueableOperation."
    Does anyone know how to repair this problem.  It just began happening today.
    Thanks,
    Ken

    We previously had a similar issue when migrating multiple accounts from MobileMe to iCloud.  The issue was resolved by disabling and then enabling iCal sync through iCloud on our iMacs in System Preferences.
    Always backup your calendar before troubleshooting (File > Export > iCal Archive).
    The following steps are roughly from a Apple Support Community discussion.
    Open iCloud in System Preferences.
    Switch off (uncheck) iCal sync in iCloud System Preferences pane.
    Backup iCal before doing this. You will need to remove calendar data.
    Open iCal and verify the iCloud account is removed in the iCal preferences under accounts.
    Close iCal, reopen System Preference and switch on (check) iCal sync in iCloud System Preferences pane.
    Reopen iCal and verify the iCloud account is enabled in the iCal preferences under accounts.
    At this point if the problem persists you might try completely signing out of iCloud and then signing back in. But remember to backup all related data (iCal, Contacts, Mail, Photostream, etc) before turning off iCloud sync!

  • OMacbook calendar gets the message "the server responded with an error" and is now not syncing. Any idea?

    I haven't done anything to my Macbook (I don't think) but out of the blue when adding entries to my calendar,  I now get the message "the server responded with an error". Consequently it will not sync with the Cloud. I have an iMac which DOES sync with both iPad and the iPhone.
    Anyone any idea?
    ALan

    Sorry, no help there. Ical does not stay open long enough to do anything with. All it does is crash and apologise and say it will notify Apple.
    Guess I will just delete it altogether and use google calendar.

  • When opening the Calendar app, I am greeted with a box that says "This calendar can not be refreshed."  After clicking on "OK" another box pops up saying "The server responded with an error."  How can I get rid of these?

    When opening the Calendar app, I am greeted with a box that says "This calendar can not be refreshed," and after clicking ok there is another box saying "The server responded with an error."  How do I get rid of this.  The calendar functions all right, but just have to close both of those boxes after doing any action in the calendar app.

    Please take each of the following steps that you haven't already tried, until the problem is resolved. Back up all databefore making any changes.
    Step 1
    From the Calendar menu bar, select
    Calendar ▹ Preferences ▹ Accounts
    Choose the affected account from the list on the left and uncheck the box marked
    Enable this account
    Then check the box again. Test.
    Step 2
    Make a note of the account settings, then delete the account and add it back with the same settings.
    Step 3
    If you can't add the account, the settings may be invalid. Verify them. How you do that depends on what kind of account it is. If it's a Google calendar and you've activated 2-step verification, you need to generate an application-specific password in your Google account and enter it in place of your old password.
    Step 4
    Quit Calendar. Triple-click the line below on this page to select it:  
    ~/Library/Calendars/Calendar Cache  
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
    Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • The server responded with an error. (not MobileMe related)

    Hello,
    At work, some people are getting this message on their computer:
    *The server responded with an error.*
    There was an unexpected error with the request (domain CalDAVErrorDomain / error 5 / description 'The server has not specified a calendar home for the account at "/ -- http://192.168.[my edit:rest of address]".').
    Can anyone please help?

    AppleMan - you're a star! Thank you very much. Bit late in coming to the rescue - just like the Cavalry always was, allegedly - but nevertheless very welcome. It has sorted the problem out for me, and probably many others who, like me, did not know that there was an empty box waiting for the Password!
    Cheers and thanks. Case closed
    Chris

  • HT4968 Calendar is locked on my Mac. I keep getting the message "The server responded with an error: Access to iCloud is not permitted. The server responded 403 to operation caldavmigrate to server queue able operation." How do I resolve?

    Calendar is locked on my MAC.
    I keep getting the message" The server responded with an error: Access to icloud is not permitted. The server responded 403 to oepration caldavmigrate to server queueable operation."
    How do I recify?

    We previously had a similar issue when migrating multiple accounts from MobileMe to iCloud.  The issue was resolved by disabling and then enabling iCal sync through iCloud on our iMacs in System Preferences.
    Always backup your calendar before troubleshooting (File > Export > iCal Archive).
    The following steps are roughly from a Apple Support Community discussion.
    Open iCloud in System Preferences.
    Switch off (uncheck) iCal sync in iCloud System Preferences pane.
    Backup iCal before doing this. You will need to remove calendar data.
    Open iCal and verify the iCloud account is removed in the iCal preferences under accounts.
    Close iCal, reopen System Preference and switch on (check) iCal sync in iCloud System Preferences pane.
    Reopen iCal and verify the iCloud account is enabled in the iCal preferences under accounts.
    At this point if the problem persists you might try completely signing out of iCloud and then signing back in. But remember to backup all related data (iCal, Contacts, Mail, Photostream, etc) before turning off iCloud sync!

  • I added a reminder in iCal and it froze up.  The error message is:The server responded with an error.

    I added a reminder in iCal and it froze up.  The error message I am receiving is:The server responded with an error.  The application then locks up and I can't find out how to resolve the issue.

    Check the parameters in your email account against what is recommended by your email provider.
    Settings > Mail, Contacts, Calendars > account
    Have you contacted the support contact at your email provider?

  • I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any sugge

    I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any suggestions on how I could kill this error message? Thanks.
    iMac, Mac OS X (10.7.2)
    Basically i tried to enter too much information into my calendar and it has crashed  now i can not get rid of the error message or use the calendar  can anyone help please

    did you find ou how to get rid of it i can't

  • I received the error (in iCal on my mac) : "The server responded with an error" while creating an event. I can't delete or acknowledge this error and now iCal is frozen. Any suggestions?

    I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any suggestions on how I could kill this error message? Thanks.

    did you find ou how to get rid of it i can't

  • Entering description of event into iCal, pasted too much text into event, responded with The server responded with an error. Preferences is greyed out, and window pop up comes up every time I open iCal and doesn't go away. Force quit, still opens. Help?

    While pasting event description into iCal, accidently pasted too much text, causing "The server responded with an error" pop up. This pop us includes the event description, but because of the mass amount of text, the window shoots off the screen to the bottom, so if there was an exit red "x" available, it isn't visible or accessible. The iCal>preferences is greyed out and I have force quit and it pops up each time I use iCal. Is this even fixable?

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • HT1338 ical error pop up, "The server responded with an error". Cannot get it to go away and cant use my ical because of it

    ical error pop up, "The server responded with an error". Cannot get it to go away and cant use my ical because of it

    How are you syncing your contacts?
    Contacts Troubleshooting
    Contacts - Troubleshooting iCloud Contacts

  • I can not open Calender. The server responded with an error. Access to account "virgin net" is not permitted. The server responded: "403" to operation CalDAVAAccountRefreshQueueableOperation.

    I can not access Calender.
    Keep getting blocked by message.
    The server responded with error.
    Access to account "virgin net" is not permitted.
    The server responded:
    "403"
    to operation.
    CalDAVAaccountRefreshQueueableOperation.

    Please take each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    In the Internet Accounts preference pane, delete any calendar accounts you don't use.
    If there's no improvement, delete all calendar accounts and add them back. With an iCloud account, all you have to do is uncheck and recheck the box marked Calendars & Reminders in the iCloud preference pane.
    Step 2   
    You may be trying to access an invited event that you declined, or one that was rescheduled after you accepted it. The error message should give you a clue as to what it is. If the calendar is on iCloud, you can bring up the Calendar on the website and select
              Show Declined Events
    from the popup menu with the gear icon in the upper right corner of the page. The declined events will appear in gray, and one of them should match what's shown the error message. [Credit for this solution to ASC member Psi.]
    Step 3
    If you get the error when trying to accept an invitation in an email attachment, it's because the organizer didn't properly create the event.
    Step 4
    Follow the instructions in this support article. Modify as necessary for a calendar that's not on iCloud.

  • I configured my iPad2 mail with my current settings. Now my Apple Mail on my Macbook Pro won't accept the password, which I did NOT change. I am running latest Snow Leopard on the Macbook. ANy help?

    After configuring my Ipad2 to accept mail at my .me account, I can no longer get my MacBook pro Apple Mail to accept the passwrod.
    I did not chnage the password when configuring iPad2 and it works perfectly.
    Using 10.6.8 and iPad is running most current update.

    Since I upgraded the hardware myself - the warranty that covers the computer is basically nulled.
    Warranty is not made void by upgrading memory or storage. If you have AppleCare then you should be fine.
    Disk Utility is powerful, but not the most powerful tool out there. There might be other applications (sometimes expensive) that can fix the volume. If your Windows partition works but not the Mac partiiton that leads me to believe the issue is solvable.
    Can you read the Mac files from your Windows partition?

  • The Server responded with an error...did not recognize your user name etc

    On one of my Macs, I am constantly getting this message and iCal will not sync. I have signed out of .Me and back in again. I know I am signing in correctly, but this will not go away.
    I could do with some suggestions please - very much appreciated.
    Cheers
    Chris

    AppleMan - you're a star! Thank you very much. Bit late in coming to the rescue - just like the Cavalry always was, allegedly - but nevertheless very welcome. It has sorted the problem out for me, and probably many others who, like me, did not know that there was an empty box waiting for the Password!
    Cheers and thanks. Case closed
    Chris

Maybe you are looking for

  • Cost Component Structure Price Not updating

    Hi, I have run cost estimate and successfully Mark and Released(CK40N). But when I see the cost estimate in CK13N its updating Ram Material cost (Overall and Lower level) but rest of the items not getting updated e.g. Mfg. Machine Time, Mfg Operter L

  • InfoObject 0ID_CHADAT is not available in version A

    Is there step by step procedures for activating this InfoObject.  The reason I plan to use it is because I have created a Delta enabled Generic Extractor using EQUI-AEDAT and feel that this is the ideal InfoObject to map to.  If incorrect please advi

  • How to color a particular row in a matrix

    Hi All, Using SBO, i am having two queries: 1. Is it possible to color single row, Cell in a matrix or a grid by any way. 2. And How to copy particular row from 1 matrix to another?. I want this by using drag n drop event of mouse. Only click and rig

  • Windows 8 Adobe Reader will not fully open a pdf compiled with several pdf's into one - why?

    Windows 8 Adobe Reader will not fully open a pdf compiled with several pdf's into one - why?

  • Packages problem plzzz help

    I have a sourcecode with the package hierarchy as package1.package2.something. Can anybody tell me how can i change the whole package into package3.package2.something nd compile it ? how can i do this ?