I recently have installed Windows XP for my computer, but it does not start my Ipod information although I already installed Itunes. What should I do, if I do not have the CD to install it from there?

Hello everyone, I recently installed Windows XP in my computer but now it does not start my Ipod classic information even I just have installed Itunes. What should I do if I do not have my CD to get it from there?

Try using Firefox. Flash usually works on Firefox when it won't on Safari. I noticed that the Safari does not show the same version as Firefox does. Iwonder if that could be the problem. Safari on the left shows 10.1, Firefox show 10.3

Similar Messages

Installed Digital Edition on the computer but it does not recognize the Nook HD when I plug it in and open Adobe....how can I transfer a book from computer to Nook if it doesn't recognize it....?

I have just installed Adobe Digital Edition on my computer. I closed it and then plugged in the new Nook HD and opened the Digital Edition back up - it does NOT list the Nook in the left side so I cannot move the book to the NOok....how do I get this recognized so it works. ?

Please have a look at the similar thread, Authorizing my nook. Hope the solution mentioned in this thread solves your problem.

I need to earase some of my old games on the i pad ,i try to push it and wait for it wiggle but i could not see the x sign ...is there somethig else i should do or forgot to do ?

i try to delele some of my old games of the i pad ...push in wait til wiggle and the x ....but haven't see the x come up ....what did i done wrong or why there is no x sign ????

Try syncing to your Mac and then try again. Don't know what is causing that problem.
If you really must delete the item from your ipad, first delete it in iTunes on your computer then sync the iPad with the computer.

I am trying to download an app for my iphone but it does not load the store

Hi
I am trying to download an app from the store, but when i go to do a search for it, the phone just stops searching. Please help

Hi Robertfrom Denver.
Did you try the solution given, and if yes, did it work?
I have done several "attempted downloads, and see the full file download, typically taking 30 minutes to complete, and then something goes wrong.
I am happy to suspend AV and FW software, but would like to know if it is a good fix or not first?
HelenfromBroughton Astley

Hi, I have Lightroom 4, but it does not support the new 10-30 pd lens for my Nikon 1. It is supported in LR5. Can I download this lens profile and install in LR4?

Hi, I have Lightroom 4, but it does not support the new 10-30 pd lens for my Nikon 1. It is supported in LR5. Can I download this lens profile and install in LR4?

Do you have the latest camera raw installed for Photoshop? If so, you can find the profiles in /Library/Application\ Support/Adobe/CameraRaw/LensProfiles/1.0/Nikon/ . Lightroom should recognize them if you move them into your home directory's Library folder in the exact same folder structure (but in the Library folder in your home directory). This is assuming you are using Mac OS X. No clue where these files would be on Windows. If you don't have Photoshop, you can install Camera Raw using the combined installer with DNG converter which is a free download from Adobe. This should (I think) give you the profiles in that exact location without owning Photoshop.

I work for the County and we purchased a copy of Adobe Photoshop CS2 long ago. The person that did the order is no longer here. All I have is the CD Disk that is new but i did not know the key code is. Is there a way to get the keycode for this?

I work for the County and we purchased a copy of Adobe Photoshop CS2 long ago. The person that did the order is no longer here. All I have is the CD Disk that is new but i did not know the key code is. Is there a way to get the keycode for this?

It would not work anyway. The activation servers have been retired and Adobe has provided a new CS2 download along with a new serial number for CS2 owners.
Download Acrobat 7 and CS2 products
Gene

Somehow my calender was erased. How do I restore it? I have time machine. Fortunately it was synched with Outlook, so I still have it there. But Ical does not recognize the Outlook file. Is there a way to restore from Outlook? resi

Somehow my calendar in iCal was deleted. It was not archived. I have Time Machine. How do I restore? Fortunately it was synched to Outlook, so it is not lost. I would like to out it back in iCal but iCal does not recognize the Outlook file.

Thank you. It's all back to normal (took around 7 hours on the late 2009 iMac). Time Machine's become better now compared to the last time I used it to migrate everything automatically (Snow Leopard days). With Maverick's Time Machine, it's almost like a cloning (except for the password) tool now. But it's always great to name the account and maybe the hardisk the same names so can just replace a newly installed OS.
God bless. Thanks again.

HT4293 I have an Apple monitor model A1316 is using for Windows computer, but I could not adjust the brightness. The monitor is not bright enough when I turned off the lights in my room.

I have an Apple monitor model A1316 is using for Windows computer, but I could not adjust the brightness. The monitor is not bright enough when I turned off the lights in my room.

Have you plugged the USB cable into the computer also as the brightness is controlled over USB. If this does not work, you would need the Apple Display Driver for the version of Windows that you are using. The display driver is part of BootCamp software that you may be able to find online

I am installing snow leopard on a new drive unformatted but it does not show the disk to install it on.? do i need to format first with one partition?

I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
do I have to partition it and name it first. -- if so just one partition?

Do this:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

HT1296 How do I back up the calendar and contacts from my iPhone5 to my new macbook pro(10.8.3)? I have backed up the phone, but it does not transfer the calendar or the contacts. If I check them in the sync area and the back up the phone again...

How do I back up the calendar and contacts from my iPhone5 to my new macbook pro(10.8.3)? I have backed up the phone, but it does not transfer the calendar or the contacts. If I check them in the sync area and then back up the phone again will they transfer or be erased? I am a bit gun shy since my previous macbook pro committed suicide and I lost a ton of info there.

Copy everything from your backup copy of your old computer.

How do I transfer music and photos from my Power Mac G5 to my new iMac. Have an old FireWire but it does not fit the new iMac

I am trying to transfer photos, music, etc from my Power Mac G5 to my new iMac. The Power Mac is too old for the migration assistant to help. I have an old Firewire but it does not fit the new iMac. Any suggestions? If a Firewire is the best option which one do I need? Thanks.

You need a Firewire 800 to 400 adapter or cable or a external USB 2/3 drive (self powered) it can default to the old USB the G5 uses 1 or 2.
Format the drive info here.
Backup and restore info
https://discussions.apple.com/message/16276201#16276201

My I pod touch 5th one month old wont charge. Its on charger for 2 days but battery does not move from red sign?

My I pod touch 5th one month old wont charge. Its on charger for 2 days but battery does not move from red sign?

Try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My ipod wont connect to itunes, i have re-installed itunes ...reset my ipod...re-boot my computer...basically i've done eveything i could but no joy it even shows on my computer but simply does not link in to my itunes. Please HELP !!!

my ipod wont connect to itunes, i have re-installed itunes ...reset my ipod...re-boot my computer...basically i've done eveything i could but no joy it even shows on my computer but simply does not link in to my itunes. Please HELP !!!

If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040

Please assist I am on a Windows 7 64 bit machine I have VS 2010 and have been fighting with this new program that I was brought on to help with - Issue is that I am unable to get rid of this issue. There is so many solutions but none have worked. If someone can give me some help with what has worked for you.
The error is Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
This is with CR installed on 64 bit.
Thank you very much for any assistance with this problem,
Kris

Hi Vittorio
Please enter the search string 'log4net crystal net' into the search box in the top right corner. When the results come up, click on the Support Notes link. That will filter for the KBAs that you want to have a look at.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
===========================================================
This is a SQL Server 2012 Developer Edition of SSRS.
I am getting this error when navigating to http://servername/Reports. The reports site was working fine, until I installed a SQL 2014 Developer instance (including SSRS) on the same server.
I can still get to the http://servername/ReportServer site.
Neither of these are using Sharepoint.
Any help resolving this issue would be greatly appreciated.
Below is the stack trace.
===========================================================
[FileLoadException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Reflection.Assembly._nLoad(AssemblyName
fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String
assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel'
or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +1149
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +323 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +116 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +36 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection
compConfig) +212 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +174 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +57 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
virtualPath) +295 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +482 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +108 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean
noAssert) +171 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +52 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext
context, String requestType, VirtualPath virtualPath, String physicalPath) +53 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +519 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+176 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +274
===========================================================

Hi Glen，
"The located assembly's manifest definition does not match the assembly reference." is generally caused by the loaded assembly's version is different than the expected version application refers to.
In this case, it should be caused by:
While starting Report Manager, the backend process ReportingServiceService need to load assemblies it refers to
ReportingServiceService reads the compilation/assemblies element from web.config(under Report Manager virtual patch)
If the compilation/assemblies is not existing, ReportingServiceService loads all assemblies from Bin folder. It can be verified from call stack System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory(). ReportingServiceService
uses System.Reflection.Assembly.Load with the assemblies' name only to load assemblies.
The Assembly.Load tries to load from the specify assembly by name from GAC at first. If it is found from GAC, it won't be loaded from Bin folder any more.
Since Reporting Service SharePoint Integration mode is installed, a same assembly of 'Microsoft.ReportingServices.SharePoint.ObjectModel' with different version might be installed to the GAC. That causes the error "The located assembly's manifest definition
does not match the assembly reference."
For more information about the error message and the loading process, please see:
http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
https://msdn.microsoft.com/en-us/library/yx7xezcf(v=vs.100).aspx
Thanks,
Jinchun Chen

I recently have installed Windows XP for my computer, but it does not start my Ipod information although I already installed Itunes. What should I do, if I do not have the CD to install it from there?

Similar Messages

Maybe you are looking for