I recently installed Maverick as my OS.  My external Apple Fax modem no longer works.  I receive the message that the fax is offline.  I repaired permissions, but still I have lost my fax capability.  What needs to be done?

I recently updated to Maverick.  My external Apple Fax Modem no longer works.  I receive a message that it is not connected.  What needs to be done.  I have repaired permissions, and found no error.

Chances are it is a software-based modem. Update the drivers of the device to Mavericks-compatible driver from the vendor.

Similar Messages

  • I purchased photoshop cs6 3 years ago via download, I copied to my own disc. Now I need to install on computer again and I get the message that the disc is counterfeit even though I have my serial number.

    I purchased photoshop cs6 3 years ago via download, I copied to my own disc. Now I need to install on computer again and I get the message that the disc is counterfeit even though I have my serial number. Help!

    download the installation files and install:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I am trying to burn a DVD with a 50 minute video.  I repeatedly get the message that the content is too long.  What have I done wrong??

    I am trying to burn DVD with a 50 minute video.  I repeatedly get the message that the content is to long.  What am I doing wrong??

    Is this using iDVD?
    iDVD encoding settings:
    http://support.apple.com/kb/HT1502?viewlocale=en_US
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
    Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t.  The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • Hi, I requested an unlock from T-mobile UK 1.5M ago, and after a restore I got the message that my iphones carrier setttings were updated successfully, but never get the message that it's unlocked. What am I doing wrong?

    Hi everybody, I need help.
    I requested an unlock from T-mobile UK 1.5M ago, and after the restore I got the message that my iphones carrier setttings were updated successfully, but never get the message that it's unlocked. And it still doesn't support nay other SIM. What am I doing wrong? How do I get it unlocked?
    Thanks in advance for advice

    Did you restore the phone as a new device when you did the restore/unlock, or did you restore it from an existing backup?  I have found that when unlocking an iPhone on the AT&T network, you don't get the message that the unlock was successful if you don't restore as a new device.  The unlock still works, you just don't get the message. Perhaps it is not carrier specific for this behavior.

  • HT201250 I set up Time Machine yesterday (using a WD 2T drive) and got the message that the first backup was complete.  I can open every file I try except Quicken and TurboTax.  What am I doing wrong?

    I set up Time Machine yesterday (using a WD 2T drive) and got the message that the first backup was complete.  I can open every file I try except Quicken and Turbotax.  What am I doing wrong?

    burgessiii22 wrote:
    Thanks for the answer Linc, but how do I check to make sure the back-up process is working if I don't think I need to restore?
    Create a test file with Text Edit (or any other program) and save it to your desktop.
    Run Time Machine from the menu bar.
    When the Time Machine icon in the menu bar stops spinning, drag your test file to the trash.
    Open Time Machine and go back 1 page. You should see your test file on the desktop.

  • I cannot install Flashplayer 10.2.152.32. I get the message that :The Active X for Flashplayer could

    I cannot install Flashplayer 10.2.152.32. I get the message that :The Active X for Flashplayer could not be registered.  The problem started when I "stupidly" accepted the upgrade on Feb 18, 2011.  It has not worked since.  I have tried every suggestion including all the older suggestions on this community forum, without success.  I am using ie8 xp2002 sp3.  I am almost going to give up.  Please help.

    Hi Lee,
    "You’re probably thinking this sounds like an administrator issue. However, I’m the only user and Windows 7 is registered to me – which should make me the only administrator."
    You are correct but to a point.  I thought so too, however, like you, I am "second in command"...under myself. 
    I was in the same situation and tried others' successful workarounds.  Nope.  Actually, an ongoing frustration for a few months to no avail...until I came across this link, http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ this-installation-package-could-not-be-opened/40c3cf33-b155-4dc7-b21e-ca5acce105 f3.  It shows you how to access the Administrator login, literally.  It worked for me. 
    This is from a Microsoft support page (SJ has probably been alerted, so I don't have much time, LOL).  I did not want to hit that "final" option and reinstall Win 7.  The first time was trying enough and I was about to give in.  
    " I’ve scanned a Microsoft forum for iTunes download/installation problems. Most answers on the forum refer to a system32 error appearing when they attempt to install itunes64bit.exe on Vista or Windows 7."
    I was opposite on this one.  What led me to think it wasn't the above was seeing this user " ` " , also known as Accent grave.  The Users first file is labeled " ` " and has a little gold lock on it.  When I scanned Task Manager, under Processes Tab, the User Name column showed " ` " attached to certain processes.  I knew it was me, but did not realize it was the Alpha me 
    I cannot say if the system automatically did this or I or Alpha (I'm blaming Alpha).  If there is a way to change this I do not know, and if I should.  Either way, I will do some more research and pray another personality isn't isn't lurking about
    Hope this helps you.
    Ss

  • I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file.

    I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file. Can anyone help me with this?

    What is the exact error message?

  • I have been trying to download Firefix 4, and eveytime I try to install it on my computer I get the message that the file is corrupt

    I am using an iBook running OS 10.3.9 - and each time I have tried to launch the download so I can install it on my hard drive I get the message that the file is corrupt and so it won't complete the operation.

    It sounds like you must have Automatic Downloads enabled on the Phone in Settings>iTunes & App Store>Automatic Downloads>Apps>On. That is why the apps are being downloaded to the phone, I would have to assume. You could try turning that off on your phone for starters. Although I don't think that would have any effect on the iPad, it won't hurt anything either.
    Try this and see if the apps show up on the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Tried to download cc and I keep getting the message that the program was downloaded but corrupted. What's best to do next?

    Tried to download cc and I keep getting the message that the program was downloaded but corrupted. What's best to do next?

    Hello Sheena - Thanks for your help. I will give it a try. Ralph
          From: Sheena Kaul <[email protected]>
    To: Ralph Alderson <[email protected]>
    Sent: Tuesday, March 3, 2015 3:19 PM
    Subject:  Tried to download cc and I keep getting the message that the program was downloaded but corrupted. What's best to do next?
    Tried to download cc and I keep getting the message that the program was downloaded but corrupted. What's best to do next?
    created by Sheena Kaul in Creative Cloud Download & Install - View the full discussionHi Ralph, Please refer to the help documents below to fix the issue:1. https://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html2. https://helpx.adobe.com/creative-cloud/kb/error--60-trying-download.html Regards,Sheena If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7248708#7248708 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7248708#7248708 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Creative Cloud Download & Install by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I left my Mac at the store for it to complete a 16 hr. backup.  Yet, I still get the message that the backup has failed, try again later.  If this persists use Utility Disk to  repair.  I have done all of this and the Apple Genus said everything was ok.

    My question:  is it important that I seek further help with this backkup issue or just ignore it.  The 16 hr. backup at the Apple Store is accessable in the Time Machine.  I'm just concerned about the error message. 

    I did the verification, which indicated that the last backup was 0422 today.  However, when I opened my Mac, this morning at 0500, I still got the message that the backup was NOT performed, etc, etc. etc.
    The backup is made on the standard Tiime Machine.
    The next backup has already started as of 0518.  Let's see what happens.  This is strange.  Here is the time sequence: 0518    Backup started
                    0525     Mac. froze and color wheel would not allow me to access anything on the Mac,
                    0528     Backup continuted:  91.9 MB of 94.8 MB
                    0530     92.2 MB of 94.8 MB
                    0532     Backup stopped.  Message: Latest backup 4:22 Today.
    It seems to be functioning properly at this point.  I'm curious to see if I get the standard "The backkup was not performed because an error occured while copying files to the backup disk" message, later today.
    I appreciate your help.  I'll keep you posted as I may need your help again. 
    Thanks

  • How do I install itunes on a windows 8 computer. I keep getting the message that the app cannot run on my computer.

    I cannot install itunes on my windows 8 computer. I get the message that the app cannot run on my computer.

    Hi mlheidt,
    If you are having trouble installing iTunes on your Windows 8 computer you may want to use the following article to help you get it up and running -
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • HT3275 I am using an external drive for backup. I am now getting a message that the drive needs a disk repair, but when I run disk repair it  just seems to freeze.

    I am using an external drive for back up. Yesterday the backup failed and I received a message that the external drive( a passport drive) needed a 'disk repair", when I ran disk repair nothing happened it seemed to freeze. Suggestions? should i simply erase the external drive and start over-my computer is fine.

    Get a different drive for backup.
    In the meantime, once you are backed up some drive safe, then you can attempt to repair the backup drive using the repair the directory link.

  • When I start iTunes on my home computer (Not a MAC), it automatically shuts down, and gives me the message that the Data Execution Prevention security feature has shut it down...what to do?

    When I start iTunes on my home computer (Not a MAC), it automatically shuts down, and gives me the message that the Data Execution Prevention security feature has shut it down...what to do?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Is there a way that articles opened in Safari can be saved to read off line? Sometimes they are there when I opened Safari but other times I get the message that the page can't be found because I don't have Internet access.

    Sometimes they are there when I reopen my iPad, even without Internet access. Other times I get the message that the page can't be found because I don't have Internet access.

    You're welcome 
    I use Reading List all the time.
    If applicable, you can access saved Reading List articles in Airplane mode >  iOS: Understanding airplane mode

  • I have sent invites to my photo stream but invitees are getting the message that the photo stream may have been changed or deleted - it hasn't. What do I do?

    I have sent invites to my photo stream but invitees are getting the message that the photo stream may have been changed or deleted - it hasn't. What do I do?

    Have you tried here:
    iCloud: Troubleshooting iCloud Photo Sharing and Shared Photo Streams

Maybe you are looking for