I recently purchased an iPad2 and can't synchronize it to iTunes.
When I connect it to my PC (Windows 7, iTunes 10.3.1.55), I get a message stating that it could not read from my iPad2 and asking to restore it.
I downloaded the most recent iTunes and restored the iPad over and over.
After restoration, Ipad launches again, asks for iTunes connection.
After connection, iTunes says it is synching. This step takes a long time (more than 10min) and nothing happens on iPad screen.
After 10 min, progress bar disappear from iTunes and "Synchonizing" appears on iPad.
I get a message stating that "iPad could not be synchronized. A folder was specified instead of a file".
iTunes show that I have 4GB space on my iPad, although it should have 60GB.
When I drag files from library to iPad (on iTunes), sync starts on PC, but nothing on iPad screen.
I purchased my iPad in the US and I'm currently in Brazil.
I took the SIM card away so it doesn't interfere in the process. It wouldn't work with AT&T SIM card either.
I will appreciate any help.
Sorry I am not a Windows user but I found this thread and it talks about updating USB drivers. Take a look.
https://discussions.apple.com/thread/2523169?threadID=2523169
Similar Messages
-
Hi, I’ve recently bought an iPad2 and can’t get connected with AppStore or iTunes, when I tap on these icons a grey page pops up saying is loading but never opens the page, no failure message is displayed, it just keep saying is loading.
Apparently it is not an issue with wifi since Safari, You Tube and Maps work well, I’ve tried some of the tips, e.g. log off/on my Id, change password but no one worked.
Your help will be highly appreciated.
Thank you.
Luis.Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
can anyone help?
Did you purchase new or used? Is it fully charged when this happens?
Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now. I want to be able to face time also using my ipad2 to my laptop especially if one of the members of the family is traveling. Thanks.
thanks. your answer was correct, clearer. I have another question, maybe you can answer. I just purchase my ipad2 2 days ago. yesterday, there was a sound. today there is no sound. there is a sound only in movies and you tube and music. but no sound on all apps and keyboards. I look it up and seems like ther are few that have this problem. I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that. I tried rebooting it and still won't work. Should I just restore it?
-
I have been using one apple ID for my family as it makes it easier to manage itunes purchases/rentals on all of our devices. Now that my kids are getting old and my wife has recently purchased an Iphone, I can see that I need to change my strategy. I plan to add a few more iphones to the family very soon. What is your recommendation to manage all of our devices (iphones, itouch, apple tv) for my family? Can I continue to function with one apple ID or is it time to take the leep into attempting to manage multi-apple ID's?
There's a few ways of managing multiple devices on a single computer (and keeping seperate content on each). The following document is worth checking through:
How to use multiple iPods, iPads, or iPhones with one computer -
I recently upgraded my device and can't make purchases because I forgot the answers to the apple security questions. How can I reset these?
Thank youIf you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551 -
I recently purchased an iMac and transferred all of my documents, photos etc. from my Macbook Pro. Everything seemed fine until I opened iPhoto and now it seems as if some of my photos are distorted and squished. Does anyone know how I can fix this?
How did you move your iPhoto Library from the old Mac to your new one?
Do the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database. -
Hi there, I recently purchased an app and I need to re download it onto my iphone 4s. The app is saved on my laptop and is not available on my app store download history. Can anyone advice how I can redownload it from my laptop?
You just resync your iPhone with iTunes on your laptop.
If you are logged with the same Apple ID on both devices it should be available to download from your phone:
Open App Store app > Updates > Purchased -
I recently purchased an iMac and found out that I can download OSX LIon for free, but have been unable to redeem on the Canadian site. According to their info Canadian systems should be eligible. How do I redeem this on the Canadian site?
Please read and follow the instructions at the Lion - Get up to date site. If you continue to have problems you can contact AppleCare (the number is in your owners manual or you can use the AppleCare Contact Info site.
-
I recently purchased a mac and used a firewire to transfer my files onto my new imac with migration assistant. Now I have 3 users. I want one with all my main files (pictures, music, files from my old computer).
I don't mind having an additional "family" account so my younger daughter can't mess us things, but I can't figure out how to get files from one to the next and then delete the one user name.
Thanks,In order to delete other accounts you must be logged into an admin account. You cannot delete the account into which you are currently logged.
When you started the new computer you were in the Setup Assistant. You created a new admin account before finishing the setup. You need to log into that account because it is an admin account. You can then delete the account you migrated from the old computer (and any other accounts you don't need or want.)
Then create a temporary new user account with admin status - name it, Temp. Log out of the current account and log into the new account, Temp. Now delete the initial account you created in Setup Assistant. You now have one account, Temp. Now re-migrate your data from the old computer. When that is completed log into the migrated account, which should be an admin account, and delete the temporary account, Temp. -
My wife had an iPad for a year and synced to our computer with no problem. I recently received an ipad2 and when I tried to sync using separate apple and iTunes passwords, under her computer user name, it appears I over-road her account and synced all her apps with my apps on my iPad. I then set myself up as a new user on our computer and tried to sync. I now get the error that my iPad is synced to another library. How can I start over without erasing all my data on the iPad?
Go back to her login. Unless you deliberately erased apps, they should all be there, both yours and hers! Then, you need to set up each iPad separately. You will notice that they have separate names for that very purpose.
There is no problem with multiple Apple IDs on the same iTunes on the same computer except... Apps are permanently associated with the ID that was originally used to obtain them. If you choose to update an app from inside iTunes and you're logged into the "wrong" ID, you must log out and back in again.
On the bright side, you can configure either or both iPads to sync with apps and music and movies, etc. from either or both IDs. Further, if you choose to update the apps from the iPads themselves, there is no need to log out/in. The device handles that. All you need is the correct password. In my case, I use the same password for both IDs to make things easier. -
I've just purchased an ipad2 and have synced it with Outlook to get all contacts, etc. I've set up the mail account and it is working just fine. The sync doesn't pull over legacy emails from Outlook and my Outlook has been set up to remove them from the webmail server therefore they aren't available from webmail anymore. Is there anyway to pull them over to the iPad?
But is there a way (simple or not-so-simple) to find
out EVERY SINGLE FILE that's referenced on a
timeline? (I have lots of stuff imported into the
project that I know isn't used on any timeline, but
I'm afraid of moving or deleting things for fear of
never finding it again.)
I'd love to get some sort of "printout" (a list or
something) of every single file.
There is, go to browser and cntrl click on any one of the columns,
and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
Hope this helps and that I've read you properly,
Peace
P-Book 1.5, 17" 2gsRAM Mac OS X (10.4.4) FCStudio -
I recently purchased Apple TV and the first day it worked great. The second day I can no longer get the airplay symbol on any of my devices?
Airplay doesn't show up in control center on any of your devices?
Have you tried restarting the devices by holding down the home and power button for about ten seconds. I would also try restarting your router/modem. -
I recently purchased a IP5 and found that the volume is lower by 20-30% compared to an IP 3/4s.........is possible? Apple has a solution?
Of course, this all began just about 2 weeks after my 3 years of AppleCare were up....
Call Apple Customer Relations - 1-800-767-2275. Ask politely & firmly that you want to be transferred to Customer Relations. Tell them exactly what you stated in your post. See what they can do for you.
GOOD LUCK! -
I JUST PURCHASED A IPAD2 AND WANT TO PASS ON MY IPAD ORGINAL. I WANT TO CLEAR IT AND RETURN IT TO FACTORY SETTINGS. THIS MUST BE DONE ON WINDOW 8. IT HAS CHANGED TO MUCH TO UNDERSTAND.
I assume that you've copied everything off it that you want ?
You don't need to use your computer (on iTunes 11 you can enable the sidebar that used to appear via control-S, that may make it easier to navigate). On your iPad tap on your id in Settings > Store and log out of your account, and then do Settings > General > Reset > Erase All Content & Settings to remove all your content from it.
For future info typing all in capitals is considered shouting, make the post difficult to read, and may mean that people don't reply.
Maybe you are looking for
-
Is it possible to change the settings in AR Properties Advanced tab with Adobe Acrobat XI?
I noticed when I went to print a PDF double sided, that despite the following the guidelines from Adobe on this process, it still printed single sided. I checked the properties of the PDF itself and on the Advanced tab, the DuplexMode was set to Sim
-
Return in finally block hides exception in catch block
Hi, if the line marked with "!!!" is commented out, the re-thrown exception is not seen by the caller (because of the return in the finally block). If the line is commented in, it works as I would expect. Is this is bug or a feature? I assume the ret
-
Why is the background color not applied in one case?
Hi, I'm using RH 7 and WebHelp. I apply a TableHeading style to the first row of my tables. The TableHeading style is supposed to fill the cells of the first row with a background color of blue, and the text is in white. It works fine except for one
-
How to Covert a COBOL Program to a COBOL Service
Hi, Anyone knows how to convert a COBOL Program CMPxxxx to CMLxxxx ? I believe there should be some converter to do this. Thanks
-
Simple question - how do i deploy SQLJ on OC4J version 1.0.2.2.1?
I'm trying to get info on this question but it only seams to appear on JSP. I need to work with servelts and not JSP. Thanks for any help Paulo Gomes