I recently started to have this problem, I can view videos on youtube without any problems, but if I put a link lets say on FB, I cant view the video

I recently started to have this problem, I can view videos on youtube without any problems, but if I put a link lets say on FB, I cant view the video I can only hear the sound, its like, there even the buttons, only invisible, yet still clickable, so if I manage to find and click the full-screen button the video switch to full-screen and I can view it. this is really annoying as I cant see flash animations and some videos at all.

You need to find out what type of video it is.  What your describing is what you get when a Video codec (software that allows you to "see" the video) is missing, damaged, or too old for the movie.
Once you identify what kind of movie it is, then you can update the codec.

Similar Messages

  • Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

    Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

    Try
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • Few days before I brought one iphone 5 by second party and this phone make a unlock but it sometime have a cellular network most of time say no service can u solve this problem please and I put serial number it say this phone is replace can u help me for

    Few days before I brought one iphone 5 by second party and this phone make a unlock but it sometime have a cellular network most of time say no service can u solve this problem please and I put serial number it say this phone is replace can u help me for original serial number....

    If Apple's service database says that your iPhone was replaced, then Apple will no longer provide any service for that phone.
    First, get a new SIM from your cell carrier and see if that corrects the problem. If it does not, try the usual steps for addressing software problems: restart, reset, restore.
    http://support.apple.com/kb/HT1430
    http://support.apple.com/kb/HT1414
    If you try restoring from a backup and that doesn't fix the problem, try restoring to factory settings and, if the problem goes away, then sync back your apps and content. You'll lose the app data and settings, but if the problem is due to a corrupt cache or settings file, restoring to factory settings should cure it.
    If none of that helps, your device may have developed a hardware fault. Again, Apple will provide no service for it, so you will need to pay some independent repair shop to fix your iPhone.
    Regards.

  • HT1386 Since updating to OS5 I cannot open downloaded podcasts on my iPad 2, indeed can't confirm If they have been downloaded. I see others have this problem but what is the solution?

    Since updating to OS5 I cannot open downloaded podcasts and can't confirm if they have actually been downloaded. They appear in the "more" list in iTunes music, but won't play. I hear others have this problem but what is the solution ?

    Install the Flex:Player App;  http://itunes.apple.com/app/flex-player/id451024857?alreadyRedirected=1&mt=8
    Then you can open the movies, keep tapping on them and choose Open in Flex:Player.

  • TS3554 Recovering a lost firmware password. I have this problem but I live in Argentina. How I can solve it. Thanks.

    TS3554: MacBook Air (Late 2010) and later, MacBook Pro (Early 2011) and later, iMac (Mid 2011) and later, Mac mini (Mid 2011): Recovering a lost firmware password
    MacBook Air
    I dont remember my EFI password, I have my admin password. I dont know how to reset it.
    I have this problem but I live in Argentina. How I can solve it. I bought this machine last year. Thanks.

    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.
    For Snow Leopard and earlier with installer DVD
         Mac OS X 10.6- If you forget your administrator password,
         OS X- Changing or resetting an account password (Snow Leopard and earlier).
    For Snow Leopard and earlier without installer DVD
        How to reset your Mac OS X password without an installer disc | MacYourself
        Reset OS X Password Without an OS X CD — Tech News and Analysis
        How To Create A New Administrator Account - Hack Mac

  • I cannot view a website I frequently visit due to a grey box that appears to the left of the web address. How do I change this so I can view the whole site?

    I often visit a website to watch climbing videos & check score cards of athletes. I have been able to look at it all day, now there is a grey box that does not allow me to view these things. When you click on the grey box, a grey cartoon man appears, & a message. It says "This website does not provide identity information. Your connection to this website is not encrypted." How do I change these settings so that I can view the entire site?

    Just to expand a little on Sudarshan's reply, and perhaps to inform you as a beginner, I will say that everything you see on the screen in DW's Design view is completely dictated by the underlying HTML and CSS (and perhaps javascript and server scripting). In addition, if that code is somehow made to contain invalid usages, then the effect of that on DW's Design view, and ultimately on the rendering of the page is completely unpredictable but most likely always destructive to the desired layout.
    As a result of this, any answers to questions you might pose about layout would always need to begin with an examination of the VALID code. That means you can shortcut what often becomes many tedious steps (as seen in this forum over and over again) by first validating your code with the W3C's validator (http://validator.w3.org) and fixing those errors highlighted that you are able to fix. It is perfectly reasonable to ask here about errors that you don't understand or don't know how to fix.
    Once you have your page built with valid code, then we can begin the task of troubleshooting your layout. And again, the best way to do this (and to enhance the likelihood of getting a useful answer) would be to upload your page and its dependent files to some webspace that you control, and include a link to that uploaded page in your post.
    Make sense? You will really help us help you by doing this.

  • When I send a group txt and one of the people reply it creates a new message.   How do I keep all the replies in the same message?   I used to not have this problem but it started last month.

    When I send a group txt and one of the reciepients replies it creates a new message.   How do I keep all the replies in the same message?

    If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
    If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
    http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
    This one will create the form, database and send out the emails...
    http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
    The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
    http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • When I press slightly on either side of my macbook pro august 2011 trackpad or if I click the tracpad, I hear a light tick noise, sounds kinda like metal.  Anyone else have this problem? What is it?

    When I press slightly on either side of my macbook pro august 2011 trackpad or if I click the trackpad, I hear a light tick noise, sounds kinda like metal.  Anyone else have this problem? What is it?

    It's a spring-loaded grounding contact between the top case/chassis and the bottom pan of the machine. When you press, it scratches against the inside of the bottom pan and makes the sound. It's completely harmless and doesn't indicate that anything is wrong, but it can be slightly annoying. A visit to a Genius Bar may result in quieting it partially or completely.

  • I movie is not responding.  I have tried deleting storage space to no effect.  Does anyone else have this problem?

    i movie is not responding I have tried deleting storage space to no effect.  Does anyone else have this problem ?

    If you are positive there is a good Wi-Fi signal in the area of the iPad I would first reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
    If that doesn't work, I would turn off your iPad and then restart your Wi-Fi router. Unplug the router for 30 seconds then plug it back in. Once the router had completed its restart process and established a link to the Internet then turn your iPad on. Make sure Settings > Wi-Fi> On.

  • When I am listenign to songs off iphone, I hear the music but not the vocals does anyone have this problem and do you know how I can fix this

    When i am listening to music from iphone, teh sound is greater than the vocals.  Does anyone else have this problem and if you do, how do I fix it, it's somewhere in the setting i believe

    Plug the headphones all the way in.

  • We cannot complete the software update for apple tv.  is anyone else having this problem.  it gets to about 99%, then says 'unsuccessful'.

    we cannot complete the software update for apple tv.  is anyone else having this problem.  it gets to about 99%, then says 'unsuccessful'.

    toccolo wrote:
    I had the same problem when trying to update from 5.1 to 5.1.1 over ethernet. Try unplugging the ethernet cable and update over WiFi - worked for me. After the update you can plug in the ethernet cable again.
    Yes, I had the same problem and resolved by the method suggested by Toccolo...... thanks.

  • Don't know if it's sync or icloud but I have started getting thousands of ithmb files in my pictures library each day. I can't open them and I have to continually delete them. Anyone else have this problem?

    Don't know if it's sync or icloud but I have started getting thousands of ithmb files in my pictures library each day. I can't open them and I have to continually delete them. Anyone else have this problem?

    Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    See Here  >  http://support.apple.com/kb/HT1808
    However... Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Jessica Sanchez wrote:
    I am installing itunes to a laptop and have not sync device to this lap. ...
    Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue.

  • HT204291 my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem?  How can I fix it?

    my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem?  How can I fix it?

    Hi freezebri,
    The following steps may resolve your issue:
    Apple TV: Basic troubleshooting
    http://support.apple.com/kb/ht1551
    If your TV screen appears fuzzy or black (you see no video)
    Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
    When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
    Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
    Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
    Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
    Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
    If you are connected via HDMI, try unplugging and replugging your HDMI cable.
    If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
    Hope this information helps ...
    - Judy

  • Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
    You are likely to get poor connections and dropping out.
    If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
    There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
    http://forumhelp.dyndns.info/networking/powerline3.jpg
    I will monitor the subject line of this thread, should you want to post any more information.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

    Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

    Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

Maybe you are looking for

  • Pivot point in image rotation with JAI...

    I'm using JAI to rotate some images... but it doesnt seem to rotate around the center of the image.. here is my codes.. float xOrigin = ((float)src.getWidth())/2; float yOrigin = ((float)src.getHeight())/2; float angle = (float)v * (float)(Math.PI/18

  • Creating a vertical dropdown menu that displays inline

    I would like to change how my dropdown menu displays.  First I'd like for it to dropdown directly underneath its menu item and in the process move the other links down.  And remain visible until it is clicked again, thereby shifting other links back

  • Cannot open link with PDF in windows7

    I got a new computer with windows 7( 64 bits) and I have got the latest version for Acrobat reader (Windows 7/English 10.1.3). When I search for a web page and I get links that contain PDF documents, I cannot open the PDF docs.  The Adobe reader trie

  • Duplicates in Drafts Folder

    We have recently migrated from an IMAP provider to Exchange. Users on 10.5 and 10.6 are experiencing an bug where Drafts are being duplicated over and over again in the drafts folder. This happens whether or not drafts are being saved to the sever. U

  • Had to do a recovery from icloud and lost all my projects in imovie

    Got back all my photos and videos but can't find my projects in i-tunes and don't know how to find them on the cloud. can anyone help ?