I recently switched from PC to Mac and am able to find and transfer most of the larger files of music to iTunes, but there are about 750 songs that are held in sub-files that require me to dig in and transfer them one by one to iTunes.. I've tried transfe
I recently switched from PC to Mac and am able to find and transfer most of the larger files of music to iTunes, but there are about 750 songs that are held in sub-files that require me to dig in and transfer them one by one to iTunes.. I've tried transferring the parent folders, but it doesn't seem to work. Does anyone know of a more efficient way of getting iTunes to dig into the subfolders and transfer the music without me having to go one by one?
There is a good general guide to switching from Windows to Mac at the following link that touches on moving music as well How to Move to a Mac - Get your stuff from your PC to your new Mac
There are also these guides:
How to move music between authorised computers
Networking with a Windows PC
Don't forget to deauthorise your old PC if you are disposing of it so you don't use up your 5 allowances: About iTunes Music Store Authorisation and Deauthorisation
Similar Messages
-
recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42 are all the cores being used with FCP7?
johnnyapplesod wrote:
exporting qt files and rendering project files now takes longer than my old machine
It's because the PowerMac G5 had HUGE bandwidth with a fat BUS on each processsor so they could run hard, hot and heavy.
It's not so with the Intel processors which are multi-core and share a common bus thus bottleneck.
The newer Intel processors can do more work on the CPU, but when it comes to in/out they are s-l-o-w.
I've had a wickedly fast dual processor (not dual core) G5, RAID 0 pair of 10,000 RPM drives as boot and a fast video card, I could do a lot very very fast.
You'll likely have to upgrade to Final Cut X to get more cores utilized, prepare to cry a little bit, Apple is working on the features they stripped out of it to make amends to pro users who complained loudly. (all over TV too)
http://www.loopinsight.com/2011/09/20/apple-releases-major-update-to-final-cut-p ro-x-release-demo-version/ -
Recently switch from PC to Mac
I started to use the iPhone on a PC but now that I have made the complete switch to Mac the phone no longer syncs with iTunes! iTunes doesn't even auto-launch when I manually open it it freezes and I have to force quit the application. What should I do?
Is your iPhone still set to sync with your PC? Because if so, your Mac probably won't even recognize its auto-open-iTunes feature. I would suggest (if your Mac will even let you open iTunes without freezing) that you restore your iPhone. Be sure and do it on your Mac. Then set up all your syncing with your mac and it should work fine. Did the article viali17 have you look at solve the freezing issue?
-
Recently switched from windows to Mac-can't get ipod nano to sync
After reading help pages, I believe I need to reset my ipod. HOwever, all the directions are asking me to select ipod from device list and mine won't even show up on the device page of itunes. At this point I just want to erase everything on it and start over. Any help would be appreciated!
I have read that page before. My problem is that as I try to restore and follow the directions, it says to plug in ipod and wait for it to appear in the itunes page. Well it does not show up, so I cannot find the restore button in the settings. I really think its a software problem as the ipod just says do not disconnect whenever it is plugged into my computer-whether it's charged or not. Thanks for trying to help.
-
I recently switched from PC to Mac and I want to be able to open a tiff or jpeg in camera raw. I could do it on my PC but can't figure out how to do it in Mac??
Use File>Open, set Enable to All Readable Documents, then click on your tiff or jpeg and select Camera Raw under Format
Then click on Open -
Since switch from pc to mac epson R800 producing lousy photos.
Recently switched from pc to mac pro. Using Epson R800 printer. Cinema Display is calibrated using spyder pro. Mac driver downloaded from Epson seems to work okay altho setup is quite different from PC. Really not very good, actually. Prints are really very poor, not acceptable by any standard.
Have rechecked with Epson and apparently I have the newest driver for mac os x.
Anyone got any ideas???Yep, know all that. The problem that seems to exist is the inability in the mac to control all of the usual features that were previously controllable when this printer was setup on the pc.
I downloaded the mac driver for this printer from Epson but peculiarly in CS3 it does not allow for all functions. Why? Wish I knew.
So, downloaded it again, just in case a file or whatever went missing on the first download. Same thing happens. Not all printer controls are usable.
Oh and nope I do not have the gutenprint or whatever it's called listed so that's not the problem. -
I recently switched from a pc to the Mac and now I am unable to locate my music library in iTunes... any advice?
Your question is a little bit vague, can you be more specific? Are you trying to find your iTunes library on the PC so you can move it to the Mac? Have you already moved it to the Mac? Can you see the music in iTunes on the Mac, but want to find the folder where iTunes puts the music files?
You might find this article helpful:
iTunes: How to move your music to a new computer
Or this:
iTunes 10 for Mac: Find iTunes files -
Did Mac OS recently switch from 72 DPI to 96 DPI?
Did Mac OS recently switch from 72 DPI to 96 DPI?
I ask this because my MacBook renders text at 96 DPI, whereas I read everywhere that Mac OS (X?) renders text at 72 DPI, and MS Windows renders text at 96 dpi.
Note I'm only talking font points to pixels, not pixels to screen (which is dependent on the display).
For example, on TextEdit in plain text mode a 16 point font is rendered at 21 pixels, and that corresponds to 96 DPI (if it was rendered at 72 DPI, it would be 16 pixels instead of 21).
I had a look at the "System Profiler" > Graphics/Display, but I couldn't find a DPI value. It only mentions resolution (e.g. 1366x768).
So, do you know if Mac OS recently switched from 72 DPI to 96 DPI? And if yes, do you know at which version it made the switch?Thanks Kurt, but this was not the info I was looking for.
My point is, how comes my Mac is behaving as a 96 dpi OS, where this is not documented anywhere that I know of?
In fact, as I said, I've found plenty of documentation saying the mac is a 72 DPI OS
(for example, wikipedia) and, even after extensive googling, I have found none saying it is a 96 DPI OS?
In fact, everywhere it says Windows is a 96 dpi OS, and I've verified that.
Every rendering engine has a specific DPI count, which does NOT relate to the question "how many pixels (or points) do I need to specify if I want my text to be x inches tall" (by the way, I call that "pixel-to-screen" resolution, or "points-to-screen" resolution). That depends on the screen.
The DPI I'm talking about answers the question "how many points do I need to specify if I want my text to be x pixels tall". I call that the "points-to-pixel" resolution. That doesn't depend on the screen, it only depends on the OS (at least, when there's no "software" zoom, that's why I take TextEdit as a test on Mac, and Notepad on Windows). -
My wife recently switched from an iPhone to a Samsung and she can send texts but she can't receive them nor receive emails. Her iPhone has had her info removed and the settings have all been set to default. What else does she need to do to correct this?
In particular the last link is for you
iMesssage to old phone
If you move to another phone and forget to turn off iMessage then read “if you no longer have the device in http://support.apple.com/kb/HT5661 If you still cannot resolve it call Apple http://support.apple.com/kb/HE57
To deactivate iMessage http://support.apple.com/kb/ts5185
Read http://m.samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00053450&fm_s eq=62995 -
I have CC for work and my PC to do work at home. At home I switched from PC to Mac this weekend. I want to redownload my apps for the iMac but it's telling my I'm using a 30 day free trial. I need to discontinue the PC apps and download to the new computer.
YOu need to sign out of the PC thru the CC manager and then sign in on the Mac.
-
I recently switched from a pc to a laptop and am in process of moving my Itunes library to my laptop.I cant find my "purchased"songs .How do I recover my purchased songs and get them into my new laptop library? There is a record of my purchase in the Itunes store.
"Where do I find my hundreds of dollars of downloads I have done since 2005?"
They will only be where you put them If you are doing the very basics, then they will be on your computer and they will be in your backup copy of your computer.
The itunes store is not global at all, never has been. You cannot redownload your content from another country. You can only use the countrys itunes store for the country that you are physically located. -
i just recently did a reinstall on my mac, i tried to open itunes, but there is an error message that says itunes requires quick time 7.5.5 or later, i have tried to update quicktime, but cannot. please help
Just FYI
QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
http://support.apple.com/kb/DL27 <-- Quicktime 7.5.5 -
i am looking to make the switch from pc to mac and have been eyeing the MBP 13". I would like to know whether it is fine to add RAM and SSD myself? any compatibility or warranty problems? what brand/type of RAM and SSD is the best fit? thank you.
Chamar wrote:
I'm possibly wrong here but I suspect opening a brand new MBP to add parts yourself will void the warranty. It is probably in the small print. I certainly would not risk it for an expensive Apple product.
Some (Windows) laptops have easy access to memory and disk slots that do not necessitate taking the complete back cover off. However, Apple does not make life easy for you.
However, if you are going for a 'used' machine it is probably worth a try.
Not possibly, definitely wrong, Ram and Hard Drive are considered user replaceable and will not void the warranty if changed. -
I recently switched from years of PC to iMac ( OSX 10.7.5) and need to batch convert thousands of old WordPerfect files (many without an apparent file extension) into my new Microsoft 2011 Word. I am a computer nitwit and am hoping for some simple solution.
Try reindexing the mailbox. This can take awhile if you have a lot of mail.
Reindex messages.
If that doesn't work try deleting MessageUidsAlreadyDownloaded3.
Quit the application.
You need to look in your user Library. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail/V2/Mail Data/MessageUidsAlreadyDownloaded3. Move the file to your desktop.
Open the application and test. If it works okay, delete the file from the desktop.
If the application is the same, return thefile to where you got it from, overwriting the newer ones.
If you prefer to make your User library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.5. I have also been informed that if you drag the user library to Finder it will remain visible. -
Does ipad support all my MS Office docs and files when I have switched from PC to Mac?
Does iPad support all my MS Office docs and files when I have switched from PC to Mac?
A simple sreach on the App Store in iTunes will bring up dozens of them for you to choose from.
Allan
Maybe you are looking for
-
Error message when creating new database
Hi, i am trying to create a new database for the first time but keep getting an error. Ive been through the create statement several times and it all looks good to me.Any help would be greatly appreciated ! The error im getting is : ORA-00604: error
-
How can I make my images look good when exporting to PDF document?
Hello! I'm struggling here with a PDF Brochure that I need to create (intended for web only, not print). There are two images that look horrible and pixelated when I create my PDF file. I have tried everything, making the images bigger and smaller, u
-
Since updating to the newest version of Garageband I've noticed a distinct slow down in interface and functionality; makes editing incredibly difficult having to wait 2-3 seconds after selecting a note or section; sometimes the whole app becomes unre
-
Please fix the nav dock home screen!
I find it very irritating that the car dock screen does not rotate. It only displays in horizontal mode. I prefer to navigate vertically. I'm not concerned about what I'm passing on the map, I want to see where I'm going. This oversight doesn't make
-
im changing my media card from a 2gb to a 16gb and i want to transfer everything to the new media card, but i want it in the same order. is this possible? Solved! Go to Solution.