I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups.

I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups. Why? Please help

http://pondini.org/TM/FAQ.html

Similar Messages

  • HT2188 i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/s

    i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen

    Have you downloaded and installed the latest version of iTunes from here:
    http://www.apple.com/itunes/download/

  • TS3683 Not enough space on my Mac HD to back up my iPad.   My iTunes library is on an external drive.  Can I use this same drive to Back yup my iPad?

    I don't have enough space on my Mac HD to back up my iPad.   Actually, my iTunes library is on an external drive.  Can I use this same drive to Back up my iPad?

    1. First make sure iPhoto is not running. If it is, quit it. Use the Finder to copy your iPhoto Library file to your external drive. Unless you've changed it, its located inside your Pictures folder and is named "iPhoto Library".
    2. After the copy is complete, start iPhoto while simultaneously holding down the option key. iPhoto will bring up a dialog box. The file in the list is your existing Library on your internal disk. Click the "Other Library" button and navigate to your external drive. Select your freshly copied iPhoto Library file and click "Open". iPhoto will from now on open and work with this library on the external drive.
    3. After you've confirmed iPhoto is working properly with the newly copied library you may wish to delete the original library in your Pictures folder to recover the disk space.
    Don't forget to keep a backup copy of your library on a separate disk. It's not a matter of "if" your external drive will fail but "when". You need to make regular backups or you'll be sorry someday.

  • After accepting update to my time capsule, I can no longer complete a backup because there is not enough space.  I tried deleting old files, but it doesn't seem to work.  Any advice:

    My time capsule was updated through an apple download update on June 16, and now I cannot back up my computer.  The message is that there is not enough space.  I tried deleting my files, but it didn't help.  any suggestions?

    How much space is there according to airport utility?
    TM can be fussy.. Do a factory reset of the TC and give it a new name. Use short, no space and pure alphanumeric type names..
    And reset TM. See A4 here. http://pondini.org/TM/Troubleshooting.html
    Then set up TM again to the TC and see if TM will start .. the reset will not hurt the backup and TM can still find it on a renamed TC.

  • I'm trying to get the pictures from my ipod onto my computer. I did it earlier but i earsed them. Now when i plug in my ipod it says '''no new photos or videos' how do i get my pictures back on my dell computer to upload onto facechipz?? HELP PLEASE!!

    what am i spoopsed to type here?!?!?!

    Photos taken by and saved to the iPod are included in the backup that iTunes makes evetime you sync or if do a manual or iCloud backup.
    Per the following the backup includes:
    iTunes: About iOS backups
    Camera Roll (Photos, screenshots, images saved, and videos taken. Videos greater than 2 GB are backed up with iOS 4.0 and later.)
    Note: For devices without a camera, Camera Roll is called Saved Photos.
    Thus if you backed up after the photos were taken yuo can restore an iDevice from that backup

  • My Lacie external hard drive will not back up on Time Machine. Says there's not enough space. This has happened with every single external I've purchased. Thought TM was supposed to delete old backups??

    My Lacie External backed up on Time Machine after the first back up but now says there's not enough room. I thought TM deleted old back ups to save new versions. What am I doing wrong. This happens to me constantly. Every single external hard drive I've purchased for the MacBook Pro (5 of them) has not worked either initially or at the second back up. It either isn't formatted properly so I have to go to Genius bar to help me set up for the first back up, or after the first back up, it says there's not enough space and I have to go back to Genius Bar. Is there a way I can fix this on my own?

    I just purchased 2 external hardrives. a LaCie Minimus and a G Drive. Each 1 TB. The guy at Apple told me that would provide 2 good TM backups for me. My internal HD has 750 GB capacity, of which I'm using 700 GB. Perhaps the ratio is not great enough. I do wish they would have told me this before I purchased the two Bummmmer! I even had them format and get the first back-ups going because of issues I've had in the past. I also just bought a 750 GB for photos.
    So, I won't be able to buy another bigger external since I've just purchased 3. Ugh. Well, I'll just exclude some files and divide things up. Eventually, I just want my 20,000 iphotos on one of the 1TB externals, and a TM back-up on another so that iphoto will function once more. It really hates how many photos I have and is brutally punishing me for it.I seriously need to do some housecleaning!
    Thanks for the advice. Just moved from US to Australia last week and was hoping to upload a few photos and the domino effect has lead me to this. Just went to Genius Bar in Perth today and they told me how to reformat drive to transfer iphoto library over, but I got stuck at trying to back-up my TM.

  • Nokia 100 (not enough space for new messages)

    Hi!
    From time to time i get messages that there is a text message that wants to come through but that there is not enough space. I then delete some inbox messages and then within minutes i get the text. However, recently it has taken much more time for the text to come in after deleting old messages. 
    And why do i all of the sudden get a message that there is not enough space, then i delete some old messages, and NOTHING comes through? Why am i getting this so-called false alarm from time to time now?
    I really hope someone can help me with this problem!
    Thank you!

    Hi Friend,
    Much probably that "others" data is taking the most of usage space.
    So start to solve this issue deleting text messages.
    If the issue persists, connect your iPad with iTunes and check how much space "others" data is taking. try to reset your device by backup in iTunes.
    If still not working, I advice you to search ib other foruns. There are many pleople that faced this problem and successfully solve it
    Hope it helps

  • Mmap:Not enough space error

    I am using mmap for the cache and I frequently get the following errors:
    BDB0126 mmap: Not enough space
    BDB0061 PANIC: Not enough space
    BDB1546 unable to join the environmennt
    The cache size is 100 MB in 4 segments. How an I fix this problem.

    Lets go back to the original problem which is BDB0126 mmap: Not enough space.
    As discussed in my initial post, BDB is making a mmap OS call and this call is returning an error.
    This error is directly tied to your system.   You are trying to allocated 400MB in 4 100MB segments.
    I suggested you write a test program and perform a test.
    I also suggested you reduce the segments -- if you used 3 as an example you would have 3 100MB segments.
    This would effectively reduce your overall cache.
    You could also use something other than mmap as BDB provides other options which are covered in the docs.
    You will need to debug your own system to figure out if the problem is lack of total memory or lack of 100MB chunks
    of memory or something totally different.   What I know is the mmap OS call is returning a -1 on your system. 
    The other errors you reported all stem from the first one, so the first one is what need to investigate..
    thanks
    mike

  • My iPhoto Library was deleted from my computer, not enough space for a time machine back up?

    My entire iPhoto Library is gone, inaccessible, doesn't show up in finder. I tried to restore my last Time Machine back up but it says that I don't have enough space on my startup disk. In order to create space I deleted everything nonessential and moved all of my essential folders such as documents, photos, videos, everything, etc. to my external drive, then deleted them from my hard drive. I emptied the trash to make sure that everything was wiped. I tried to do the Time Machine back up of my iPhoto Library again and is still says I don't have enough space. I looked at my storage under About this Mac, and it says that 120.35 GB of my current computer storage are photos, however, I don't have ANY photos on my hard drive at all. I don't know what to do because I can't delete applications and there is literally nothing else I can delete from my computer, so I don't understand how 135 GBs of storage is being used up.
    Any ideas? Could there be somewhere my photos are hiding? I just don't understand how this makes any sense, or why my library got deleted in the first place for that matter.

    Search for your photos in Spotlight.

  • Time Machine - "not enough space to back up" despite large drive

    Hi,
    I have a 2.7GHz Quad-Core 27" iMac from July 2011. It has a 2TB HD which I back up to an external single partition 2TB HD (WD MyBook) over Time Machine (TM). The iMac HD has about 1.4TB on it.
    It was "just working" until about 2 weeks ago, when I got a message that says in essence  "not enough space to back up: only 600GB available when 1.4GB is needed". There is one succesful 1.4TB backup. I get the error message hourly as it attempts to back up then fails. Previously there were multiple time stamped (houry, daily etc) backups but when I first got the error message, there was only one left, implying that TM deleted the earlier ones in its quest for more space.
    As there is a 2TB drive to back up 1.4TB, there should be loads of space as each backup should just log the changes, not the whole drive.
    However, TM is acting as if it needs the full 1.4GB free for each delta backup, rather than just space for the changes. This is new behaviour as it did not need this before.
    I have googled the issue extensively, checked FAQs etc and found two potential causes.
    The first is that I changed the name of my computer around the time that the problem appeared. This can apparently cause TM to not recognise old backups. I therefore deleted the old one and rebuilt my backup from scratch, hoping that the new name would be used. I was able to do one backup before the same issue appeared again.
    The second is that the sparsebundle needs to be resized manually due to a bug, but I can't find the sparse bundle on the external HD, even using Disk Utility (this maty be because I am being very stupid - I am a recent Mac user and do not have much experience of digging into OS X's innards)
    I am now at a loss as to what to do.
    I would be very grateful indeed if anyone had any thoughts that they could share.
    SE.

    Semper Eadem wrote:
    I got a message that says in essence  "not enough space to back up: only 600GB available when 1.4GB is needed". There is one succesful 1.4TB backup.
    It's trying to do a near-full backup for some reason, and it's already deleted all but the last remaining backup trying to make room. It was probably trying to back up about 1.2 TB, since it adds 20% to the estimated size.  That's likely your entire home folder.
    The first is that I changed the name of my computer around the time that the problem appeared. 
    No, that shouldn't cause it.  Apparently on some of the very first versions of Leoaprd, it did, but not since.
    The second is that the sparsebundle needs to be resized manually due to a bug,
    No, there isn't a sparsebundle on backups made to an internal or directly-connected HD.  Those are used only for network backups.
    What else did you do around the same time you changed your computer name?  See #D4 in Time Machine - Troubleshooting for common causes.  
    I'd recommend turning TM off, erasing the drive and doing a "full reset" per #A4 in that same link.  Then exclude most of the large folders in your home folder, per #10 in  Time Machine - Frequently Asked Questions. Then run a backup, and immediately run another. 
    If the second backup is more than a GB, use one of the apps in #A2 of Troubleshooting to see exactly what got backed-up the second time.  That may tell us what's going on.
    If it wasn't large, start removing the exclusions, one at a time.  Run a backup (that should back up the excluded item(s), then run another and see how large it is.   That should pinpoint the problem.

  • Time Machine Back Up Not Enough Space

    I just tried to back up my Mac Book Air and I use OS X 10.7.3. 
    I got a message which said that there was not enough space on my external hard drive.   The message said that I needed 50 GB and the external drive only has 43 of space... Note, when I check out the hard drive, it says:  ""Available 43.63 of 249.93".
    The sole purpose of my hard drive is for back up purposes.  So,  there isn't anything other data or information on the drive...
    So, what do I do? 

    To be clear--is this a drive you have been using with the MacBook Air previously with Time Machine?  Or is this the first time you've tried to use Time Machine with this drive on this computer?
    If it's not the first time, I suspect you're just getting Time Machine's warning which everyone eventually will get (unless you've turned it off or really don't change many files) that it is going to need to delete something from the drive outside of its normal scheduled elimination of backups (normally it lengthens out the period between saved backups as the backup ages, figuring you don't need every hour's snapshot for the last three years).  By its nature Time Machine's needs tend to grow over time and it will eventually consume all available space on a drive that it is given access to.

  • Time machine back up- not enough space  so can't back up?

    hi my computer entire hard drive is 2TB and only 1Tb used. and my external hard drive(time machine back-up) is 2TB. and right now Time machine back up failed. and keep saying that hard drive don;t have enough space....
    i erase all from external hard drive ,, back up NEW. and still saying that not enough space on back up drive, weird thing is and i have 2.8 TB to back up.. but my entire hard drive is only 2TB .. what is that? and i only used 1.1 TB ish..
    somebody help me? how can i use time machine back up with this issue?

    What's shown for +Estimated size of full backup+ under the exclusions box in TM Preferences > Options?
    If that's over the 1.1 TB used, there are a couple of possibilities:
    Another internal or external drive, formatted for a Mac, is connected but not excluded, so Time Machine is trying to back it up, too. Exclude it, per #10 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
    Something on your internal HD is corrupted, making Time Machine think it's much larger than it really is. Verify your internal HD, per #A5 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).

  • HT204053 I am trying to sign up for icloud using windows 7. When I enter my apple id it says "this is a valid apple id but is not an icloud account". Where do I create an icloud account?

    I am trying to sign up for icloud using windows 7. When I enter my apple id it says "this is a valid apple id but is not an icloud account". Where do I create an icloud account?

    I already quoted the minimum requirements, look in the post before yours.
    You will have to upgrade your Mac to at least 10.7.5, upgrades are not free, you buy them from the App Store. Mountain Lion is the best but your Mac must be compatible.
    Here is a list of compatible machines.
    Also note that some older apps (Office 2004, Appleworks) will not run on Mountain Lion.

  • I am trying to update my apps on my 4s but says there is not enough space. It shows i have 19.3 GB of 25 GB. Also, in my itunes...it shows about a quarter of space on the bar is photos but I took all the photos out. Don't make sense.

    I am trying to update my apps on my 4s but says there is not enough space. It shows i have 19.3 GB of 25 GB. Also, in my itunes...it shows about a quarter of space on the bar is photos but I took all the photos out. Don't make sense.

    It's telling you there's not enough space *on your 4S*.  The 25GB you refer to is probably that on iCloud, that's different memory than that on your iPhone.  You need to delete video, pictures, apps, or whatever ON THE IPHONE, to make enough room for downloading updates to your apps.

  • HT1688 I did a back up and now trying to do the restore and it KEEPS saying there not enough space - I've deleted all kinds of things but it still keeps saying that.  It shows more space available than what is actually used.

    I'm tryin to get my iPhone 4s unlocked and I was told to do a back up and restore - well, over and over it says I don't have enough space for restore and I've already deleted a lot

    Morning Bodance,
    Thanks for using Apple Support Communities.
    There could be several reasons why this could occur.
    For more information on this, take a look at this article:
    iOS: 'Not enough free space' alert when trying to sync
    http://support.apple.com/kb/ts1503
    Best of luck,
    Mario

Maybe you are looking for

  • Set value for subreport on load or current-to prevent dispalying "#Error"

    I've got a Work Orders Report which I use to Print Production Copies for Operators.  This report uses a subreport to pass information about Purchase Orders to the Report and then I use "=[Reports]![WORK ORDERS REPORT]![AssociaterQuery subreport]![SIZ

  • Document currency

    Hi,   I am working on a report in which there are 5 fields gl account(hkont),vendor code(lifnr),vendor name(name1),aging details,currency(document currency-waers).Here the requirement is I have to split the aging details column into 4 columns(current

  • What's exactly wrong with my iPod?

    I have had my nano since last October, and its been working fine for me until now. When I turn on the iPod, its the old folder with exclamation point. However, the computer doesn't even have an idea it exists, and henceforth won't charge. So I got it

  • Twitter does not update in Firefox but does in IE9. I prefer Firefox but can't use it with Twitter. Is there a fix?

    When I go to Twitter in Firefox it doesn't update automatically, which it should. It does, however, and I'm sorry to say this, update automatically. I prefer Firefox and hope there's a fix for this Twitter issue. Thank you.

  • How do I use both a dtd and schema during parsing?

    Hi I have this akward problem. I have created at schema for or DOM parser to validate up against. Thats all fine. The problem arise when I want to use entities in the xml like æ å which are special html esc. sequences for danish letters. Then I found