I recently tried to update my iphone software via itunes but got an error and my iphone has gone to recovery mode and now it doesn't connects to my itunes. i tried everything but can't connect and apple mobile device(recovery mode) driver

I recently tried to update my iphone software via itunes but got an error and my iphone has gone to recovery mode and now it doesn't connects to my itunes. i tried everything but can't connect and apple mobile device(recovery mode) driver is not installed. Where can i get apple mobile device(recovery mode) driver software? please help

http://support.apple.com/kb/TS3694#error1

Similar Messages

  • I can not start my apple mobile device. the computer will attempt to start it up but then bumps me out. I have tried everything.

    I can not start my apple mobile device.  It will attempt to start and then bump my out.  I think I need a third party and I do not know how to get a third party of to start the apple mobile device.  I have looked online at people who had the same problem as me and tried to do what they did to get it started.  I am still not able to get it started and I have been working on this for three day. please help if you can

    See this article for instructions on restarting and re-installing the Apple Mobile Device service if necessary.
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    B-rock

  • Apple Mobile Device (Recovery Mode) and frozen "Connect to iTunes" screen

    I have had my iPod Touch for about one year and have synced with my PC (XP) without incident during that time. Yesterday something happened while connecting with iTunes and I have not been able to find the solution on this board or others. Maybe the charge remaining in the iPod was insufficient. The iPod screen is frozen with the "Connect to iTunes" icon. I can turn it off (black screen) but as soon as it is attached to the PC or docked, the same icon reappears. I cannot make the red slider appear to shut it down.
    On the PC side, as soon as I attach the iPod, it wants to install the driver for "Apple Mobile Device (Recovery Mode)". I have attempted to point it to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers find the driver, but what it wants is not there. I have completely uninstalled iTunes, Quicktime and related files; and reinstalled iTunes. I have tried every trick I can find in this forum and others to no avail. When the iPod is connected to the PC, the device manager shows Other Devices - Apple Mobile Device (Recovery Mode) with a yellow question mark and exclamation point. This device shows twice. The Apple Mobile Device USB Driver shows under Universal Serial Bus Controllers and is working properly.
    I am at the end of my rope. I hope somebody that can help me will read this. Thanks.

    Hi
    I am experiencing the same problem as the person in the first thread as follows:
    "The iPod screen is frozen with the "Connect to iTunes" icon. I can turn it off (black screen) but as soon as it is attached to the PC or docked, the same icon reappears. I cannot make the red slider appear to shut it down.
    On the PC side, as soon as I attach the iPod, it wants to install the driver for "Apple Mobile Device (Recovery Mode)". I have attempted to point it to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers find the driver, but what it wants is not there. I have completely uninstalled iTunes, Quicktime and related files; and reinstalled iTunes. I have tried every trick I can find in this forum and others to no avail. When the iPod is connected to the PC, the device manager shows Other Devices - Apple Mobile Device (Recovery Mode) with a yellow question mark and exclamation point. This device shows twice. The Apple Mobile Device USB Driver shows under Universal Serial Bus Controllers and is working properly."
    I have tried everything I can think of and have been advised to do on the Apple Support pages but this makes no difference.
    Please can someone offer a solution.
    Message was edited by: WillJackThom

  • Windows can't find Apple Mobile Device (Recovery Mode) after iTunes 9.2 upg

    Hey guys!
    My iPhone 3G (3.1.3) and iTunes (9.1) has been working normally when I upgraded iTunes to the 9.2.0.61 version to install the OS4 in my iPhone.
    After this, when my iPhone turn on in Recovery Mode, Windows cannot find the driver "Apple Mobile Device (Recovery Mode)" and the iTunes can't upgrade to OS4.
    If I turn on my iphone in normal mode, Windows can install successfully the driver and iTunes recognize the iPhone.
    I put my iPhone in another PC (with Windows XP and iTunes 9.1) and the Windows found and installed the iPhone drivers in Recovery Mode. But, in this computer, I've also tried upgrade the iTunes to 9.2 version and the same Problem has benn ocurred.
    Someone else has the same problem???
    Thanks for help!

    I GOT THE SOLUTION!!
    This problem happens due a conflict between the Samsung's Software "NEW PC STUDIO" and the Apple Drivers!
    The solution is unistall all Samsung's Software and removing all Apple Softwares as well (like iTunes, device drivers etc)
    Then cleaning the Windows Register with some software like CCleaner AND manually using REGEDIT, just find for Samsung (carefully with other Samsung Devices like HardDrive. You musn't remove something like that) then, finding for New PC Studio.
    Remove all Keys related Samsung New PC Studio.
    Restart your PC and reinstall iTunes lastest version.
    Now, you can put your iPhone in Recovery Mode that Windows will recognize it!

  • Hi,i have the new ipad 16gb it was working fine till i went to download te new i tunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes en usb symbol.

    i have the new ipad 16gb it was working fine till i went to download the new itunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes and usb symbol can anybody help me.

    Try these instructions:
    http://support.apple.com/kb/TS3281
    You may also have to go to the link in the bottom paragraph if the first page instructions do not work.

  • IPad - Windows Vista unable to locate Apple Mobile Device (Recovery Mode)

    Hey everyone , I am at my wits end trying to fix this problem . Having spent hours and hours researching a solution I am no closer to finding a resolution.
    The problem began during a software update last week ( I have an original iPad , prior to this I had used it on my PC for nearly 12 months without issue).
    During the software update it started coming up with a "Found New Hardware Apple Mobile Device Recovery mode" then "Browse for Driver software" , so I direct it to C:ProgrammeFiles\Apple\Mobile Device Support\Driver etc .... however it still cant locate it.
    Now - the iPad is stuck in Recovery Mode. It has been nearly a week now.
    Here is what Ive tried
    Confirmed Apple Mobile USB installed and working
    Followed the Apple Support prompts re drivers to a tee
    Tried manual update of Driver
    Updated to latest iTUNES
    Uninstalled then reinstalled driver
    Read post after post on "similar" issues
    Nothing is helping
    Please , please , please , pleeeeeeeeeease can you guys help ?
    Please note following
    My iPOD Classic is recognised fine by my PC and is 100% working
    I havnt completely deleted itunes then reinstalled because post after post tells me this doesnt fix this particular issue
    During the software update initially it was coming up with a 604 error / Restore as well as the Driver issue , now my ipad is not recognised at all by Windows
    Yes - I could take it too another PC to restore , but I want it synced to my PC and ITUNES library
    I feel I'm no Computer Dummy , but this one is a total head scratcher
    Heeeeeeeeeeeeeeeeeeeeeelp !!!!!!!!!!

    Fixed.
    Took iPAD to Apple store who restored back to factory setting.
    Brought home and it synced fine
    Back up and running
    Diagnosis ? probably some soft ware update glitch
    Lesson ? - dont waste your time reinstalling Itunes for this problem

  • I just tried to connect and sync my iTouch (4G) to iTunes and I got an error message that said :This iPod can'be used because  Apple Mobile Device service is not started". I tried searching my PC for the program and no luck. Any suggestions?

    I just tried to connect and sync my iTouch 4G to iTunes and got this error message: " This iPod can't be used because Apple Mobile Device service is not started". I just did the upgrade fo Safari and iCloud.   Any suggestions?
    Thanks!
    Dan Farrell

    I corrected the link in the previous post you responded to, but here is the correct link again.
    http://support.apple.com/kb/ts1567
    B-rockt

  • I just bought a brand new Ipod touch but when I went to update it, a screen keeps popping up saying that the apple mobile device (recovery mode) was unable to install to my ipod and the ipod will keeps showing me the connect to itunes, what can I do?

    i really need help with that

    Maybe here:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    Otherwise com back with the exact wording of your error message. The one you gave does not seem correct.

  • When trying to sync to itunes I get a message it can not because the Apple Mobile Device services is not started, how do I fix?

    When trying to sync to itunes I get a message it can not because the Apple Device Services is not started.  How do I fix it?

    Type "Apple Mobile Device Service" into the search bar at the top of this page by "Support" and read the resulting help articles.

  • Windows needs to install driver software for your Apple Mobile Device (recovery mode) what do i need to do for this error? i tried all the options and my ipod wont work , need help???

    i am using ipod touch 4g

    rishiv93 wrote:
    i tried all the options...
    Did you follow this article about Apple Mobile Device Service? http://support.apple.com/kb/TS1567

  • HT201413 itunes update failed - can't get past "Apple mobile device failed to start"

    Any help would be appreciated:
    I opened itunes today and got the standard needs-to-update message, so I let it do its thing.  Rather than update like usual, it stopped and said there was an error and it failed to finish (didn't copy that one down).  I tried clicking on the desktop link, but it said there was something missing and I should reinstall it. 
    I went and uninstalled it, then went to the itunes site and downloaded the latest version, and now I'm stuck with this:
    "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
    Then I have the option to abort, retry, or ignore.  I can't ignore it 'cause it brings me back there, and retry does the same.  Abort just cancels the whole install.
    I looked up "Apple Mobile Device" but the help tips just tell me to stop it and start it again, but it never started.  I tried to start it, but I get this:
    "Windows could not start the Apple Mobile Device service on Local Computer.  Error 1053: The service did not respond to the start or control request in a timely fashion."
    Where do I go from here?  It has always just...updated.  I have no idea where it's getting this problem from.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • I can not install the Apple Mobile Device

    I do not get completely install the iTunes 10.7, I have completely removed the previous version's instructions itunes support and after doing this several times always end up like me not install the Apple Mobile Device and iTunes so I recognized my devices. Can anyone help?. Thank you.

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • HT1925 Why can I not uninstall "apple mobile device support" from my computer?

    I am unable to uninstall "apple mobile device support program" from my computer.  The uninstall is necessary because an error message MSVC80.dll pops up.

    See the discussion in user tip: https://discussions.apple.com/docs/DOC-6562

  • Apple Mobile Devices Support USB Driver issue

    While I am aware this is a somewhat common problem, I have already followed all suggested routes I've seen for fixing it, and none have worked. My computer seems unable to detect my iPhone at all, and seems to fail to install the AMDS USB Driver (though all other elements of iTunes appear to install correctly.
    Here is some relevant information to help troubleshooting.
    I have already stopped and restarted AMDS and enabled automatic startup (http://support.apple.com/kb/ts1567)
    I have already uninstalled and reinstalled iTunes and related services (Including AMDS) (http://support.apple.com/kb/HT1923)
    I have tested all relevant hardware, including the iPhone itself, the connecting cable, and the USB ports that I've used, and all are functioning correctly (The iPhone can connect to other computers using the same cable, the computer can connect to other devices using the same USB ports)
    I have the newest version of iTunes available (11.1.5)
    While Apple Mobile Devices Support is installed, the USB Driver associated with it does not appear in the device manager. I have checked all folders in the device manager, including (but not limited to) Imaging Devices, Portable Devices, and Universal Serial Bus Controllers.
    There are no "Unknown Device" entries in the Device Manager
    My operating system is WIndows 7
    Both before and after reinstalling iTunes completely, Windows is unable to detect the iPhone in any obvious way (My Computer screen, Device Manager, etc). The USB driver for Apple Mobile Device Support is not disabled, but rather does not appear at all.
    What could be the cause of this problem? Is there a way to install the USB driver by itself without installing/reinstalling the related iTunes applications?
    Any help on this issue would be greatly appreciated.

    really? so apple.com arent checked by those who work on apple improvements? that would be kinda stupid im my ears. some comments here have an answer from ppl with an apple symbol, "specialists" they call them self. need some respons from them maybe.
    i have tried everything, worked fine before the latest patch, so why cant it be a driver bug? they are humans too, they who make drivers. they just have to admit they had done something bad here, and solve it fast.
    can i download an old itunes or something so i can atleast send my photos over.
    the PC dont even say  "couldn't install driver" or what it says in english, nothing happends at all. the drivers are there.

  • How can I download the apple mobile device usb driver?

    Mine is missing.  I have followed the steps here : http://support.apple.com/kb/TS1538
    The device driver is missing.  I tried removing all things apple from my computer and reinstalling itunes to no avail.  Neither my computer nor itunes recognize either my iphone 4s or my ipad.  It isn't my usb ports as I have two and they are working with other devices.  It isn't the cables as my iphone and ipad have two different cables.  I can't seem to find info that addresses the driver specifically as this seems to be the problem.  I also tried another suggestion where I made sure the usb ports weren't in power saver mode.  Any suggestions?  I really appreciate your help.

    Have you done:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    What results do you get when you run this:
    iTunes for Windows: Device Sync Tests
    Do both the Home button and Power button work OK normally?

Maybe you are looking for

  • Can I connect Windows 7 to a mac network account server

    Hi All, I have a Mac Mini Server allong with a pile of Macs and a few PCs. What I want is being able to login to an ACCOUNT from ANY of my macs OR PCs. So when the computer turns on it asks you to put in a username and password. I know this is possib

  • Issue in accessing Client Web Service 401 authentication error

    Hi, I have a requirement where i need to call a web service from SOA composite. When i deploy the service on SOA Server and try accessing it i get below error **oracle.fabric.common.FabricException: Cannot read WSDL "{http://www.service-now.com}Servi

  • Displaying regression line slope on line chart

    Post Author: Derk_Niblick CA Forum: Charts and Graphs I've been having some difficulty building a chart. I'm trying to plot two different series onto a chart. A scatterchart is ideally what I am looking to use, but I cannot get the trendlines to work

  • Drop down in a PDF form

    Hi forum, I'm usign a BADI in ABAP to fill a PDF form.Is there a way you can create a dynamic drop down list in  your form dynamically with values you read from the dictionary table? Thanks Zola

  • Push production

    Hello, I am trying to run Push Production scenario. I enter Product view of a component and follow menu Goto--->Push production to create an order for finished good. Here I have two questions: 1) I select a purchase requisition with overcoverage aler