I recently updated my iphone to version 5, but when before i could activate it to update, i need stc signal and my iphone keeps showing no service, even when there is a sim installed.
please help me
my problem is given in the headline
You cannot go back
Basic Troubleshooting
Reset
Restore with back up
Restore as new
After updating did you reset the iPhone ,if not it is like not rebooting after an update to a PC
Similar Messages
-
I updated my iphone 3g ios from 2.2 to 4.1, after the upgrade my iphone keep showing no service even if i insert a sim card. Any help please.
Jennyccc wrote:
What can I do to fix it
Jailbroken devices are not support by this forum, or by Apple. Apple reserves the right to refuse activation to any iOS device that is currently, or previously, been jailbroken. -
My iphone 3G show no service even the sim is in but it sometime gets the signals
My iphone 3G show no service even the sim is in but it sometime gets the signals
call the cell phone service provider if you have another phone you can use.
-
When iPhone keep showing no service
When iPhone keeping showing no service when you have sim in and loaded with Top up
iPhone: Troubleshooting No Service
-
i have iphone 3gs it was working fn but suddenly it start showing 'no service ' i was in far off places so i didnt tried but i am back home and it still show ' no service' i also tried changing sim but it also didnt help any suggestion .......
ask your phone carrier.
-
I recently updated to 10.8.2 and now my notes from my iphone no longer appear in my mail nor do my calender appointments. Is there any way to change it so they will appear?
If it has the same (bad) behavior on two different systems then there is a very good chance that the drive is toast.
BTW you'll get better response to your questions if the question actually reflects the problem you are having. In this case it would have been better to say you couldn't access the drive rather then that it doesn't show on the desktop.
regards -
I recently upgraded to iWork v9.0.3, but when I access each applications the versions are different (i.e. Pages V.4.1, Numbers V2.6, Keynote V5.1.1) with a install date of 3/18/09 -- which is not the current install date of 2 weeks ago. Shouldn't Pages, Numbers, and Keynote show version 9.?? My MAC confirned installation of v9.0.3 and even accepted the software code. With this discrepancy, how can I determine if the latest was installed and operational? I even downloading v9.0.4, 9.0.5, and 9.1. When I tried installing these downloads it popped up note stating that a later version of Keynote was already installed.
You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse
-
i just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing. when i try to just select my number to send and recieve imessages from it will not show up. i can send and recieve regular text but not pictures or imessage. i have tried logging off and restarting and nothing has worked.help please!!
Did you remove your account information from the other person's iPhone?
-
2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??
Hi Peter,
Thank you for the note - I have seen similar replies on other posting errors and I see how that could make sense. The thing is, my iPhone is not jailbroken - it is from an authorized distributor. However, when I told them about the "no service" problem on the sim, they were unable to assist. Then my phone messaged that an itunes restore was required - so I did that, several times, to the error message now noted on my post. I wonder if there is some other way to over-write this message? Thanks very much. -
Iphone keeps dipslaying no service after i updated it to ios5
iphone keeps dipslaying no service after i updated it to ios5
I may have found a solution! First, if you are having these problems, check the build of your iOS version. Go to Settings>General>About>Version. This should read 5.0.1 (9A405).
Upon closer inspection of search engines, I came accross a website titled "What is the difference between iOS 5.0.1 build 9A405 and 9A406?". As it transpires, there's a great deal of difference, for us 4S users anyway.
Here's the website (I hope I'm not breaking any rules by posting a link. Please let me know if I am!):
http://www.iphonefaq.org/archives/971716
The difference between these builds seems to be a fix for a problem in the iPhone 4S not recognising SIM cards. Apple's own knowledge base article states the following;
"In certain situations, iPhone 4S may have difficulty recognizing a micro-SIM card, resulting in the following behaviors:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No Service" or "Searching" in a location with good network coverage."
Apparently, because this is a small fix for a small number of users, the fix has not been released as iOS 5.0.2. Therefore, people who updated to 5.0.1 early, such as myself, can't simply update by checking on iTunes or Software Update. In order to receive this newer build we have to restore the phone to factory settings, confirm the build has been updated to 9A406, then restore from a backup.
I haven't attempted this yet as it may take some time, and I don't have enough until later in the week, but it anyone else tries this beforehand and finds it works, please let us know! -
I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?
stuckoncc wrote:
I updated the latest version of iOS software on my Macbook Pro
iOS is on iPhones and iPads.
Are you using an iPhone or iPad? -
hi my iphone 3gs keeps showing no service i have tried every sim card and i have tried reset it and update ios nothing works can anyone plz!!
ask your phone carrier.
-
I recently updated IOS 7.1.2 and now I can't view many images in websites?
I recently updated IOS 7.1.2 and now I can't view many images in websites? Does anyone know how to fix?
Also a security password has appeared on my iPhone which is 4 didgets long that I don;t recall setting up. This is blocking me updating IOS. It is usually alpha numeric.Yeah that is what I thought, but the passcode used to be alpha numeric and just changed to being 4 didgets and I don;t recall making that change. This is only to approve updates on my iPhone. The other issue is on my mac pro.
-
I recently updated to ios5.0.1 and was syncing my itouch.I noticed that it was taking too long and my itouch turned off. now, i can't turn it on.went online and tried everything from the troubleshooting assistant but nothing works. HELP PLEASE!
Have yu tried everthing here:
iOS: Not responding or does not turn on
Next see if placing the iPod in DFU mode will allow iTunes to see the iPod so you can restore the iPod.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, make an appointment a the Genius Bar of an Apple stroe. -
My Contracted SIM is for an android phone, but when i put the sim in an iphone my 3g no longer works?.. Is it because my 3g is only active on the android os and not the ios platform? Texts, Calls and Wifi work fine but the 3g doesn't work. My phone only shows 'GPRS' in the top left corner. Also I get a message come up saying "Could not activate mobile data network. You are not subscribed to a mobile data service".
Any advice would be great.Hi hexonxonx, I'm on o2. Thanks for your advice. You are right. All I had to do was change one of my APN settings to mobile.o2.co.uk and reboot my phone and this sorted it out straight away! Thanks again. Much appreciated . I was thinking I was going to have to go back to an android phone to use my 3g again but this eliminated that need. Thanks.
Maybe you are looking for
-
I am having a problem with a new flash photography site that was built for me. It requires the latest version of flash - but on some computers, the images won't appear - even when the latest version is downloaded. The rest of the site does show up (t
-
Installing 9i on OSX.2 Server
I've gotten to the point where I am trying to execute ./createDB >& dblogs. The logs I get are not even close to what I'm seeing in the samples. The logs I get back are peppered with : ORA-12546: TNS:permission denied and SP2-0640: Not connected I'm
-
Render pre export or not gives varied results
I have a few titles in my film. Some of them were rendered and others were not. When I exported qt movie self contained, there is a stark difference between those titles that were rendered before the export and those that were not rendered at all. Wh
-
Create pricing condition using BAPI_CUSTOMERQUOTATION_CHANGE
Hi , I have a requirement to update quotation pricing data is condition exists i.e if pricing is already exists , if pricing is not exists it has to create a new pricing condition with the given information . I am able to update the information usin
-
AutoScroll Tree View while searching a Tree Node
HI all, I have two Tabs Tab1 contains JTree (with JScrollPane) , Tab 2 contains some data (which are available in tree node name in Tab 1) which is to be searched in tree in Tab1 & highlight node in red Color & its sub-nodes are in expanded state . I