I recently updated my macbook 2.1 with a suggested firmware, now it does not turn on, what do you suggest?
my internal speakers aren't working. any ideas? can i reinstall software to fix this? the only sound produced is the startup strum.
If your macbook won't turn on, how do you know the speakers aren't working? What is the issue?
Similar Messages
-
I went to update my ipad 2 and the screen turned black and now it does not turn on what do i do
I WENT TO UPDATE MY IPAD 2 AND THE SCREEN TURNED BLACK AND NOW IT DOES NOT TURN ON, PLEASE HELP!!
THANK YOU FOR THE SIDE BAR SOLUTIONS, ITS WORKING AGAIN !!
-
Is there a way that i can downgrade itunes to a version lower than 11.1.3.8 because it was working perfectly fine back then. Now i can't download any music.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem? -
I recently updated my MacBook Pro to the new software, and now my iMessage and my FaceTime are not connected with my phone number like it is supposed to be. How do I get them to match so that I would be able to use my cellphone number on my notebook?
To reset any OS X program just go to the folder and trash the affected files.
Open a new Finder Window
Click "Go" in the above status bar
Click and HOLD the "option/alt" key and you will see "Library" now show in the above list
Click Library while still holding the option/alt key and a new window will open with all of your system files
Go to the preference file (NOT Preference Panes)
Locate a file named <com.apple.FaceTime.bag.plist>
Locate another file named <com.apple.FaceTime.plist>
Locate the file <com.apple.iMessage.bag.plist>
Drag the files to the trash
Delete the trash
Close FaceTime and iMessage if not already closed
Relaunch FaceTime and iMessage from Applications folder
This should reset the program back to default. You will have to put your information back into the program but it should work.
Good Luck. -
I recently updated my iPhone 4s to the iOS 6. Now I can not install application updates, my music library has vanished, iTunes Match (in Settings) keeps setting itself to "Off". I have also logged off of iTunes in Settings, and it will not let me log back in. Just a few moments ago when I again tried to log into iTunes, it asked me for my Password, then replyed that I had no Match account; but I do. Is Restore the best option?
Any suggestionsI couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again. -
Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate
Try resetting your iPad:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings. -
My daughter locked my iPod with a code and now she does not remember it It is locked and it will not work connected to iTunes
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
tried to update software on i pod touch but would not work and now ,wont restore back to factory setting or anything
Without more information all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I synced my new ipad air with my pc and now my ipad wont turn on what can i do?
I synced my new ipad air with iTunes on my pc to set up and now my ipad will not turn on what should I do?
Basics from the manual are restart, reset, restore.
Try all of these. -
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
It got really annoying when I tried to use the lock button and it wont lock the sceen!! To test whether the button was allright, I did a long press and the message came if I wanted to shut down the ipad. So the button works fine, but I cannot use it to manually lock the ipad. Now the only way to lock the ipad is to wait for 2 mins (autolock) and still I cannot wake up the Ipad using the lock button. To do that I have to use the Home Screen button
Does any one else have similar issues and any solutions pls!! CheersHarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again. -
Yesterday I decided to finally update my iphone 4S to the latest operating system 7. It asked me for a password when upgrading but now does not recognize the password and will not let me in. FRUSTRATED. What do i do????
Hi Rachel,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
- Judy -
My iPhone 4s does not detect Bluetooth
bluetooth is just a interface like usb drivers are still required
and in the case of ios devices an app made by the printer maker
not sure if hp support their bluetooth printers on ios devices but if they do it's with an app you get in the app store
bluetooth is not airprint enabled -
T61 worked with Dual Monitors and now it does not
I'm having trouble getting two monitors to work. They used to work fine. There have been no changes to hardware. Now the DVI monitor is blank. The DVI monitor does work with other computers (I'm working through a KVM switch).
T61 running XP Pro
Docking station
Worked well in the past
Took laptop to a meeting and used VGA and Laptop displaying the same information (needed to fool around with a few things to get that to work (FN-F7, Presentation Director, not really sure what worked)
Came back to docking station and my second monitor does not work anymore.
Control Panel
Shows two monitors (1 Bright, 2 Grayed)
Can select and choose extend on the second monitor (1 Bright, 2 Bright)
Apply reverts to (1 Bright and 2 Grayed)
NVIDIA Control Panel\
Set up multiple displays show choice is Only use one display (Single)
Second monitor choice is grayed
Presentation Director
No option is shown for two monitors
Laptop and monitor choices exist
BIOS Display
Tried Internal and PCI options (no joy with either)
Display is set to VGA & DVI
Any suggestions??The docking station is a type 2504. I have both the VGA and the DVI port hooked up to identical flat screen monitors. I have no intention of messing with that because the setup is working successfully via a KVM switch. Both ports and both monitors are working. However, there is a problem with swithching modes with the Lenovo laptop. The problem does not exist with any other computer working through the KVM switch.
Please note that:
this Laptop on this docking station, at my home, with all wiring and monitors unchanged, has worked for a long time.
I took the laptop off the docking station, went to a meeting, hooked up to a projector, and successfully configured the laptop such that the laptop screen and the projector were displaying the same screen at the meeting.
Then, I brought the laptop back to the same old docking station at my home and tried to regain use of my dual monitors unsuccessfully.
Using Control Panel display, and all sorts of combinations of NVIDIA Control Panel, the 2nd monitor would not be consistently detected by NVIDIA Control Panel. During these attempts, on a few occasions, I had an option to Set Up Multiple Displays in NVIDIA Control Panel; but there was no success in choosing this option. Returning to NVIDIA Control Panel / Displays would not present Set Up Multiple Displays as a valid option (not present or greyed - can't remember). I even went through permutations with the laptop screen open and closed, warm boots, cold boots, searchign for new hardware, etc. Nothing was successful.
Although changing the display within Windows Control Panel / Display was an option, any attempt to extend or replicate the dispay on the second monitor would fail and Windows Control Panel / Display would go back to the single monitor configuration was not successful and effectively ignored by both Windows Control Panel / Display and NVIDIA Control Panel.
You may note the use of past tense. I simply gave up and went to doing productive work on one monitor. After a few weeks, I went back to NVIDIA Control Panel and the second monitor was detected. I was able to Display / Set-up Multiple Displays via NVIDIA Control Panel. Subseaquently, I was able to use Windows Control Panel Display to enable and configure the second monitor and both monitors started working again (without having made any changes to wiring etc).
I don't believe there is any difference in how I used NVIDIA Control Panel on this successful attempt than in any of the earlier failed attempts. There seems to be some sort of a problem with getting the Lenovo to recognize that the second monitor is really there. Please addess this part of the problem as I expect to repeat the process in an upcoming meeting with this laptop.
Thank you for your attention. -
I accidentally input the wrong email address when attempting to register with iCloud. Therefore, I can't verify the account because the email address that I accidentally used does not exist. Can someone help me figure a way out of this because there does not appear to be a way to edit the email address?
try https://appleid.apple.com... enter the new icloud id, and try to edit the email address assocaited.
-
Ok, I have a MacBook laptop that I bought from some friends who smashed it. They trashed the screen but the rest works. I bought it for $20. Now what should I do with it. The specs are better then anyother computer I have and I would like to use it but I don't want to have to buy a new moniter or replace the computers. Is there anyway I can hook them up and get the best of both worlds or something like that?
Try this:
Restart and hold the option key down. If you see two hard drive icons, select Recovery, and hit Return.
Next follow these steps:
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.
Quit DU and restart.
Maybe you are looking for
-
SG200 how to configure Wake on LAN across subnets
How can I configure to support WOL on a SG200 (8 Ports) to support Wake On Lan (Magic Packets) from a different IP Subnet or other SG200 Switch. It seems not to support Directed-Broadcasts.
-
Adobe reader 9.1.2: "copies" greyed out under page handling
windows xp pro: sp3 adobe reader 9.1.2 canon faxphone L80 (latest drivers) When printing from a NON PROTECTED document, the "copies" option is greyed out under page handling. This issue only applies to the Canon L80 and I can print multiple copies to
-
How to escape newline character(nl) in file content conversion parameter?
Hi Experts, How to escape newline character(nl) in file content conversion parameter? For example: field1field2field3 field4field5field6 Means Item is splitted in two lines. I want to SKIP new line character and to collect all SIX fields. What will b
-
Cant mount usb sticks with fat32 ISO-8859-1 2.6.31-ARCH
when trying to mount my usb sticks from xfce4 desktop(halmount). Following error occurs (as told by dmesg). FAT: IO charset ISO-8859-1 not found First i suspected hal being the culprit but now im not so sure anymore. im using stock 2.6.31-ARCH. when
-
Datagrid itemrenderer multiple use
Hopefully a straightforward and easy to answer question, I have a datagrid with an item renderer, like so <mx:DataGrid id="dg1" x="371" y="97" creationComplete="dg1.dataProvider = getStuff.lastResult.info"> <mx:columns> <mx:DataGr