I recently updated my macbook with the "Yosemite" and I cannot open my garageband app. Help

Can't get Garageband to open...After updating with Yosemite version. HELP!!!!!!!

Printers not behaving? Reset them and start from scratch | MacIssues
OS X- Printer and scanner software available for download
Mac OS X- How to reset the printing system

Similar Messages

  • Ive got this problem with itouch 4th gen when im trying to upgrade my ios to ios 6.1.3 when it is verifying it suddenly shutdown and it keeos on blinking with the logo and i cannot open it...what is the main cause of thst..tnx

    ive got this problem with itouch 4th gen when im trying to upgrade my ios to ios 6.1.3 when it is verifying it suddenly shutdown and it keeos on blinking with the logo and i cannot open it...what is the main cause of thst..tnx

    - Reboot the computer
    - Try DFU mode and then restore/update
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Delete the update file so that new one has to be download.
    IPSW file location for Mac and Windows
    - Try on another computer to help determine if you have an iPod or computer problem.

  • I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    Hi, M_ghaderi.  
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • I recently updated my operating system to Yosemite and now my HP printer will not print correctly.

    I recently updated my MacBook Pro to Yosemite.  Now my HP printer will not print correctly.  It takes forever to print and then it will not print the document in it's entirety.  I have tried to update the printer driver but there does not seen to be an update for 10.10.2.

    Printers not behaving? Reset them and start from scratch | MacIssues
    OS X- Printer and scanner software available for download
    Mac OS X- How to reset the printing system

  • HT1752 Hello, I updated my MacBook with OS X and lost all my photos (about 7 years of photos) on iphoto (now empty). Are they completely lost or is there a way I can retrieve them from my computer?

    Hello, I updated my MacBook with OS X and lost all my photos (about 7 years of photos) on iphoto (now empty). Are they completely lost or is there a way I can retrieve them from my computer?

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • HT1338 When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

    When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

    jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
    Most of the projectors I have used support a 1024X768 res.
    Youcan also try a pram reset if it still does not detect.
    Leave theproctor connected and powered up, power down the MBP.
    Power back up the MBP and hold the following keys before you hear the start up chime:
    Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

  • HT1918 I updated my account on the computer and now cannot access my account on my iphone

    I updated my account on the computer and now cannot access my account on my iphone

    Seems like ios6 isn't any good for any of their devices. I have an iPhone 4 and recently updated to ios6 and have had all the wifi problems and apps getting hung up on load screens. Restore is your best bet and downgrade if you can back to ios 5.1. If restore doesn't help with a fresh install of ios6 then call every Apple support number you can find and be heard like the 1,000s of other people like us with ios6 problems demanding support. There doesn't seem to be any quick fixes for ios6 other than an update from Apple.
    <Edited By Host>

  • I have update to iOS 8.1.3, and I cannot open both centers, or use and cancel apps, or the screen change color to gray, or the display do not recognise that I touch it, and more. If I restart it, I find another mistake in next five hours.Help me pls.

    I have update to iOS 8.1.3, and I cannot open both centers, or use and cancel apps, or the screen change color to gray, or the display do not recognise that I touch it, and more. If I restart it, I find another mistake in next five hours. Help me please.
    iOS 8.1.3
    iPhone 5s 32 GB
    CPU 64 bit

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Error: There is a problem with the file and it cannot be copied

    I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
    There is a problem with the file and it cannot be copied.
    I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
    Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

    That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
    ioErr = -36, /*I/O error (bummers)*/
    If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
    Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
    If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
    = Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
    = Recover what files you can and write the rest off as gone.
    = Send your drive to a data recovery service and hope they can extract more than you can.
    Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
    If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

  • Repairing Library Permissions: But the instructions didn't work  clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

    Went to Help.  But the instructions didn't work
    clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

    Give this a try:
    1 -be sure to have a current backup of the iPhoto library.
    2 - download and launch http://www.macchampion.com/arbysoft/BatChmod.
    3 - click on the File button, locate and select your iPhoto Library.
    4 - check the Unlock and Apply to enclosed checkboxes.
    5 - make no changes to the other checkboxes
    6 - click on the Apply button.
    OT

  • Not event 6 month i already got a problem with the sound and i cannot watch youtube or any video using my Ipad

    Not event 6 month i already got a problem with the sound and i cannot watch youtube or any video using my Ipad. Please help

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Why i cannot update my new apple tv 3g and i cannot watch you yube need help

    why i cannot update my new apple tv 3g and i cannot watch you yube, need help.

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.

  • Updated my Macbook Air to Yosemite and now IMessage won't open pictures

    I updated my Macbook Air to Yosemite a few days ago and since then IMessage has been acting up. It won't let open pictures now. A picture comes through titled "IMG_2882" but when I click on it, it comes up with a description of the image - the type of image, when it was last modified, etc. I click the 'Open with Preview" option and nothing happens. I'm regretting updating to Yosemite now. Is anyone else having this issue? I have no idea how to fix it. Please let me know if you have any ideas! Thank you!

    If it is the third party apps crashing - try downloading another app - any free app is fine. See if that resets the other apps.

  • Just updated from snow leopard to yosemite and can't open or update iPhoto

    Just updated from snow leopard to yosemite and can't use or update iPhoto- help??

    i tried to download the free iPhoto 9.6 app but i can't.
    Where did you try to download that? This looks like you tried to download an updater.
    Move iPhoto.app from your applications folder to the Trash.
    Launch the App Store.
    Sign in with your AppleID in the Store menu.
    Click the first tab "Featured" and enter iphoto into the search field. Hit the "Return/Enter" key.
    You should be seeing something similar to this:
    If you see iPhoto, download it.

  • HT201441 i bought my iphone second hand , i have no contact with the owner and its linked to his icloud, please help

    i bought my iphone second hand , i have no contact with the owner and its linked to his icloud, please help

    Welcome to the Apple community.
    If you can't contact the owner, you may be able to sell it as 'not working, for spare parts only'.

Maybe you are looking for

  • How Do I Use my MacBook Pro to Watch a DVD From External DVD Player

    Hello Everyone! While waiting for Apple TV to become available in my place of work, I want to use my MacBook Pro monitor for watching a DVD movie played on an external DVD player. The DVD player I have is an LPC-D1000, which is a new model. While Mac

  • Export CLOB field (long= 4202083) to a file with UTL_FILE.PUT or PUT_LINE

    Hello, I'm trying to export a CLOB field to a txt file. It's a xml string in the CLOB. I have used different methods but the only which i can use is PUT, PUT_LINE. But: - PUT does only export the 32565 characters. I see that the output of l_pos is 42

  • How to disable Adobe Acrobat popups

    I installed the turnkey solution and, when doing so, assumed that I would need PDF generator - it turns out that I don't. As a result I'm now stuck with the situation in which my Adobe Acrobat Professional trial has expired and, whenever I try to vie

  • DTD Question

    I have an XML docuemnt structured like this: <foo> <goo /> <hoo /> <goo /> </foo> where goo and hoo elements can appear in any order. I need to do DTD validation on this XML Document. I was using <!ELEMENT foo (goo*, hoo*)> but the parser complained

  • I have just popped a CD into my Superdrive but nothing happens

    I am running an early 2011 Macbook Pro 2.4Ghz Core i5 with 8GB DDR3 and OSX 10.7.5 I have just popped a CD into the superdrive and nothing has happened. Using the keyboard eject button results in no action. I managed to place the eject button on the