I recently updated to OS X and now my iphoto (version 9.1.1) won't open

After updating to OS X Mavericks 10.9.1 my iphoto won't open saying that I can't use this application of iphoto (version 9.1.1) with this version of OS X. Now I'm not sure if to update iphoto or revert back to an older operating system. Of course, I don't want to lose my photos (I don't have a backup).

Talyk --
Have you checked your Software Updates for an iPhoto update?
The latest versio of iPhoto is 9.5.1.

Similar Messages

Attempted to install AirPort Utility 6.0 on my new mac mini. Install failed and now the previous version 5.5.3 won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 AirPort Utility still won't open? Help.

Now the previous version won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 Airport Utility still won't open.
iTunes no longer recognizes my airport express.
Error Message:
None of the selected updates could be installed.
An unexpected error occurred.
Can't delete Airport Utility and reinstal from scratch as it is, “AirPort Utility” can’t be modified or deleted because it’s required by Mac OS X.
Any sugestions?

I reinstalled AirPort 5.5.3 which worked, but the app still won't launch but iTunes now recognizes my AirPort Express, I just hope I don't want to change its settings.

HT4623 Just did the latest update on my ipad and now cannot use my Facebook app it won't open? Any suggestions?

I just did the update to iOS 7.1 and now cannot use my Facebook app on my ipad. It won't open, it just crashes. I can access it via the internet and can still use the app on my iPhone (which also has the update) but not on my ipad. Anyone else have this problem or have any suggestions?

Hi Mommoch!
Use the information in the following article to help you troubleshoot this issue with your purchased app:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

I recently updated my iphone software and now I can't upload photos from iphone to mac computer. Help please.

I recently updated my iphone software and now I can't upload photos from iphone to mac computer. Help please.

The following link has 2 methods for importing photos to a Mac (not counting Photo Stream). Are you using iPhoto or Image Capture? If you follow the steps in the link for that method, what exactly happens that doesn't allow the upload? iOS: Import personal photos and videos from iOS devices to your computer

I recently update to 8.2 and now I am unable to connect to my home Wi-Fi. Solutions?

I recently update to 8.2 and now I am unable to connect to my home Wi-Fi. Solutions?

Start with the simple things. Reboot your router by removing all power for 15-30 seconds. Then, as Knells suggests, reset the phone by holding the HOME and SLEEP buttons at the same time until an Apple logo appears. Plan C is Settings/General/Reset - Reset Network Settings. None of these will cause data loss, but the last one will erase your WiFi passwords.

Updated my mac to mountain lion 10.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install? Can anyone help me?

updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?

It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
Here's a thread that helped me with iPhoto:
https://discussions.apple.com/thread/4794375?start=0&tstart=0

I recently updated the itunes software and now my iphone wont detect the sim card! what do i do?

I recently got my iphone unlocked because i wanted to change my carrier. today when i connected my iphone to the itunes it started updating the software! all my previous data was erased and now it wont detect the sim card! what do i do?

Updating iTunes has nothing to do with an iDevice going into recovery mode.
If the device is in recovery mode, restore it via iTunes on a computer.

HT4972 i just recently updated to IOS 6 and now between my wifes Iphone and my sons ipod messaging and or texting and facetime is jacked what went wrong. Please help

Help I just downloaded the most recent IOS 6 update and now messaging and facetime between wifes phone and sons ipod is very messed up. We were able to fix texting by shutting off Imessaging but still have issues with facetime just keeps saying the person is busy? any help would be great

Are you using the same Apple id for your devices? It might be the same Apple id. You can check by going to settings > FaceTime and it will say apple id. If it is the same log in into a diffrent account all of them. If that doesn't work Please reply to me and I will try my best to help you.

I recently updated my apple tv and now you wifi will not connect all other devices in the room are connected to wifi

i recently updated my apple tv to 5.1 now the wifi will not connect all other evices in the house are working fine, any help out there

Go to your ipod touch wireless settings chose your network and right beside there is button looks like ">" click on that check the dhcp what IP are you getting? do you get any ip? if you do your ipod touch should work with wireless no problem. Also, you may have to enter wep key again. After that it shou,d save your device

I have recently updated my MacBook Pro and now it crashes once my Desk Top completely loads

Has anyone had a similar problem after loading the latest operating updates?
After switching on the MacBook Pro and entering my password, all goes well until my desktop and icons load. Once this happens it switches itself off.
SOlutions Inc have backed up everything for me, reloaded the older version and all is fine. Then once they try and upload the latest version the whole issue starts again!! This is starting to cost me money!
The Genius Bar at Brighton can't get me in until Sunday 19th April, can anyone help with this issue? I am a novice so any ideas need to be pretty straight forward.
Many thanks
Bonsai Bill

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

HT2479 I recently updated the iMovie app and now all my events are missing from the event library, although they seem to be on the external hard drive...how do I restore all the clips (I have begun to edit the clips down) I am a recent PC convert, thanks

I just updated the imovie app and all the clips from the event library are now missing, although they seem to be on the external hard drive...I am a new mac user, so please help...thanks...

I just updated the imovie app and all the clips from the event library are now missing, although they seem to be on the external hard drive...I am a new mac user, so please help...thanks...

Itunes recently updated on my PC and now it will not recognize my iPhone. How do I get it to recognize so I can sync?

I updated iTunes this morning and afterwards I went to sync my iPhone and iTunes will not recognize the iPhone. The computer will, but iTunes will not. How do I get iTunes to recognize the iPhone so I can sync. I do have the phone connected to the computer with the cable.

http://support.apple.com/kb/TS1538
Going to venture a guess your Apple Mobile Device service isn't started.

Yesterday I updated my mac software and now my ilustrator cs6 does not save files nor open old ones

I was working just fine with my desktop imac and it said there were som software updates available so I click on it.
Now my ilustrator Cs6 does not save files nor open them, the finder is behaving strangely or crushing...somebody asked me if I have downloades a font recently, yes I have.im in the middle of an important job and dont know wht to do

Moving this discussion to the Illustrator forum.

I upgraded to FF 7.0.1 and it won't load. If I try to uninstall it, it says it is running. I have uninstalled and rebooted and installed an earlier version but the program won't open. Can someone please help me?

I have tried everything I can think of and that has been suggested in your knowledge base but FF will not open. I have downgraded to an earlier version but that didn't help so I've uninstalled everything and have done a clean reinstall of 7.0.1. I've rebooted at each step.
However when I tried to bring my bookmarks into Chrome (so I could keep working) it said FF was open. Same thing when I went to uninstall it. Task Manager does not show it running. Chrome is working so it's not my internet connection.
I have not installed any new software or hardware recently although I did upgrade Roboform to the latest version. This was the reason to update FF as the RF addon wasn't compatible with the version of FF I was using.
I've scanned for viruses and the machine is clean.
I am on a PC running Windows 7 Home Premium. At the moment I am working off my old laptop but I need FF working on my main machine.
Any help greatly appreciated.
Thanks,
Kathy

Thanks for this mha007 - I can now open FF with a new profile. Can I copy my settings from the old profile or will this bring over the same problem, maybe a corrupt file. If it would bring the same problem, is there any way I can check which file is corrupt, apart from taking them over one by one?

I recently updated my MacBook Pro and now it says I need to restart every time I turn the computer on. It is on a grey screen.

I have not used my MacBook Pro for a few months and when I started it up did all the microsoft and system updates. Now it will not turn on and it goes to a grey page that state "You need to restart you computer. Hold down the Power button untilmitmturns off, then press the Power button again." I have done this several times and keep arriving at the same page.

OK, then there is little else to do other than to reinstall OS X.
Make sure you removed everything connected to the MBP including any USB devices.
If your Mac came with a System Install DVD, then insert it and hold the c key while starting your Mac. This will boot from the DVD instead of your internal disk.
If you find the grey screen reappears then it may not have restarted from the disc, so try again. You have to get past this step to do anything. If you can't, the problem may be a dirty or damaged DVD or an inoperative optical drive.
When it gets to the Mac OS C Utilities screen, select Disk Utility and repair your hard disk. Record any errors that it finds, since your problem may be due to a failed hard disk. If that is the case, the failure will probably arise again.
Then, reinstall OS X. Reinstalling is non-destructive to your user accounts or data.
If your Mac is running Lion, or Mountain Lion, you can boot OS X Recovery and perform all the above without a disc.
Read about OS X Recovery here: http://support.apple.com/kb/HT4718

I recently updated to OS X and now my iphoto (version 9.1.1) won't open

Similar Messages

Maybe you are looking for