I recently upgrade to OS X Yosemite. Now, My M_Audio Blackbox audio interface won't work. Any suggestions?

Recently I upgraded my OS to Yosemite 10.10.2 from Mavericks. Now, my M-Audio Black Box Audio interface won't work and I can't find it in the Logic Pro 9 software. Can someone suggest a fix? Thanks.

Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X - Yosemite
Revert Yosemite to Mavericks
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.
If you don't have a Time Machine backup, you will need a backup of some kind.

Similar Messages

Just installed new Time Capsule now my airport express range extender will not work any suggestions

Just replaced my Time capsule that died with a new one now my airport express range extender won't work. Any sugesstions?

Thank you William, I reconfigured the Airport Express and it works perfectly. Sorry I did not get back to you sooner but I came down with a bad cold.
Thank You, and Merry Christmas and a Happy New Year.
raiderron

I recently upgraded my OS to Yosemite, now I can't open my iPhoto...

Since updating my os to yosemite, i can't get into my iPhoto, when i try says it's being used elsewhere. Also, Micrsoft word, and any docs saved, won't open...help!!

There was an update for iPhoto that needs to be installed to work with Yosemite.
What version of MS Word?

Just downloaded to new maverick now my program Flipbook pro for mac won't work any suggestions

Just downloaded Maverick, Now Software FLipbook Pro for Mac wont work anyone out there have suggestions

https://discussions.apple.com/message/23501395#23501395
https://discussions.apple.com/thread/5491199

Upgrade past 10.6.6 has caused my M-Audio interface to stop working. Is there a fix short of wiping my drive and reinstalling an earlier version of 10.6?

I use an M-Audio Fast Track USB MIDI interface with Garageband. After uprading to 10.6.7, the interface quit working. I went into the preference pane and selected the appropriate input and output, but it still does not send my signal to the speakers through the built in interface. What is the solution to my dilemma?

Contact the developer. This is a quite common occurrence when the OS is upgraded. M-Audio is usually behind in maintaining compatibility.
If they don't have a solution then downgrading to a previous version will be necessary. This should work:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.

My ipod home button has pushed in to far and now won't work, any suggestions in how to get it back up or should I take it to the apple store?

Most the photos/music/memos are memories I'd like to keep but if I took it into the store would they wipe it?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- Make sure yo backup the iPod before.
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11: the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, howev

I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11: the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, however the arrows will move it OK. Also I cannot drag the selection to another photo in the photo bin as before.

Hi,
Please refer: http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
Thanks,
Anwesha

I have an iphone 4 that I recently upgraded to IOS 7, and now I cant drag music to it. It says "preparing to update" eternally. Weird thing is... I have an iphone 3s that is IOS 6, and it takes new music all day. arg.

I have an iphone 4 that I recently upgraded to IOS 7, and now I cant drag music to it. It says "preparing to update" eternally. Weird thing is... I have an iphone 3s that is IOS 6, and it takes new music all day. arg.
I have tried direct connecting the iphone 4, via wifi, everything. I hate itunes with a passion, but it seems to be a necessary evil. I dont know why I would have no trouble with my iphone 3. I am using the same technique for both phones. Find the music I want in the library and drag it to the iphone. Works on IOS 6, not IOS 7.
WHat else should I try?

Hi jeffmbellucci,
If you are having issues dragging music to your iPhone 4 after a recent upgrade to iOS 7, you may want to verify that the phone is still set to "Manually manage music and videos." You may find the following article helpful:
Apple Support: Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
Regards,
- Brenden

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

I recently upgraded iPhone4S to iOS7. Now photos on my phone look like photo negatives; all colors are a ghostly contrast. The same is true for icons of downloaded apps. What can I do?

I recently upgraded iPhone4S to iOS7. Now photos on my phone look like photo negatives; all colors are a ghostly contrast. The same is true for icons of downloaded apps. What can I do?

Invert the colors back to normal.

I recently upgraded from leopard to lion, now I can't open iPhoto get the message 'you can't open the application iPhoto because PowerPC applications are no longer supported'. I had no idea that this would happen - what can I do?

I recently upgraded from leopard to lion, now I can't open iPhoto get the message 'you can't open the application iPhoto because PowerPC applications are no longer supported'. I had no idea that this would happen - what can I do?

What version of iPhoto do you have?
Regards
TD

I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?

I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?

Custom will show automatically as soon as you just edit some options. So just go ahead, you don't need to select "custom"

I recently upgraded to snow leopard and now every time i open iCal i get multiple events to update in iCal

I recently upgraded to snow leopard and now every time i open iCal i get multiple events to update in iCal. Except I don't know where these are coming from or why. I've check iCal preferences and Help - can't find a way to stop this from happening automatically. Any Clues? Also, some of the events are already on my calendar and have been for quite some time.

Greetings,
What do you mean by "events to update"? Do you mean invites to new events or changes to existing invites?
Troubleshooting:
1. Your profile indicates you are running 10.6.7, 10.6.8 is the current version Apple > Software update.
2. First make an iCal backup: Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
3. Launch iCal and test.
Hope that helps!

I currently am using CS3. I am experiencing a problem when I am uploading my scanner in photoshop. It quits everytime I try to use it. I recently upgraded to OS X Yosemite

I currently am using CS3. I am experiencing a problem when I am uploading my scanner in photoshop. It quits everytime I try to use it. I recently upgraded to OS X Yosemite. Can you help me?

first, update your scanner's drivers.
How to Add a Scanner to CS3 | Chron.com

I recently upgraded to Mavericks and I now cannot find under the file menu the option to "Save As" in my Numbers application. Where did it go?

I recently upgraded to Mavericks and I now cannot find under the file menu the option to "Save As" in my Numbers application. Where did it go?

In many, many apps Apple has now created a confusing array of "save as..", "export", and "duplicate" all doing essentially the same thing - saving a new copy elsewhere possibly with format changes. Drives me nuts.
But its always there.
Grant

I recently upgrade to OS X Yosemite. Now, My M_Audio Blackbox audio interface won't work. Any suggestions?

Similar Messages

Maybe you are looking for