I recently upgraded my software and now when I click on a document in an email it wont automatically open - does any superstar know how to fix this?

I recently upgraded my software and now when I click on a document in an email it wont automatically open - does any superstar know how to fix this? Thanks in advance!

Have you installed something called "CleanMyMac?"

Similar Messages

  • I am trying to set my background setting to change when ever I log in, I clicked on both 'change picture' and 'random order' boxes as my settings, but when ever I log in it has the same background as before. Does any body know how to fix this?

    am trying to set my background setting to change when ever I log in, I clicked on both 'change picture' and 'random order' boxes as my settings, but when ever I log in it has the same background as before. Does any body know how to fix this?

    You have to enter the Apple ID and password. You are running into the Activation Lock
    iCloud: Find My iPhone Activation Lock in iOS 7
    Is there a way to find my Apple ID Name if I can't remember it?
    Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

  • Does any one know how to fix this? My adobe Acrobat 10.1.12 opens and then crashes after about 5 seconds.  Just upgraded to Yosemite.

    I downloaded Yosemite and I use CS5.5. after much wrangling with Java I can now open photoshop, illustrator and indesign.
    However acrobat 10.1.12 as soon as I open a document it crashes 5 seconds later. Any one know how to fix this?

    Hi ,
    Try Un installing and reinstalling the program and make it up to date.

  • I just upgraded to Firefox 3.6.13 this morning and now, when I click on a link in an email or webpage, it won't open Firefox. How can I get this option restored in Firefox so I don't have to copy and paste the link?

    I just upgraded to Firefox 3.6.13 this morning and now, when I click on a link in an email or webpage, it won't open Firefox. How can I get this option restored in Firefox so I don't have to copy and paste the link?

    See this lnk for a fix, it worked for me!
    http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

  • When updating to  itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.

    When updating to  itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.

    1) The older version of Bonjour can not be removed. Contact your technical support group.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

    Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
    a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode.* The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • My printer HP photosmart was working but now says printer not responding. Wireless network test came back with no problems. Any suggestions on how to fix this?

    My printer HP photosmart was working but now says printer not responding. Wireless network test came back with no problems. Any suggestions on how to fix this?

    marie274 wrote:
    My printer HP photosmart was working but now says printer not responding. Wireless network test came back with no problems. Any suggestions on how to fix this?
    What exactly happens between the the time the printer was last working well and no on your system? Any updates or upgrades?
    Lupunus

  • When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?

    When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?@

    Adobe web chat come up with a solution.
    Open the PP project.
    Export your sequence or project as a Final Cut Pro XML file.
    Set up a new PP project.
    Import the Final Cut Pro XML file.
    This will get you back up an running.
    Since getting back to editing this project I have found that some things will be lost or change in using XML:
    You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
    You will keep cut points, crop fx.
    Not perfect but only took a couple of hours to save 3 days work.

  • Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks

    Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks Ben  [email protected]

    Hello Trevor
    Thanks for your message. You can custom set pages but there are no preset of page sizes like A4, A3, ect. I cannot click the size preference, nothing comes up
    Ben

  • HT5002 I used Inkscape on Linux before moved to Mac. Now I am trying to install it using MacPorts, but libpixman has some problems that has been reported out there. Does any one know how to fix it without the need to use other way than MacPorts?

    I used Inkscape on Linux before moved to Mac. Now I am trying to install it
    using MacPorts, but libpixman has some problems that has been reported out there.
    Does any one know how to fix it without the need to use other way than MacPorts?

    Start with this comprehensive troubleshooting article:
    https://discussions.apple.com/docs/DOC-3521
    Look at this one for possible solutions:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • TS1702 Does any one know how to solve this iPod touch error: I am tryin to pay for an app but I can because it says that I don't have enough space when I actually have more than enough space to download it so please help me

    Does anyone know how to solve this problem: I a trying to download a paid app but I cannot because the AppStore says that info not have enough space to download it even though I have more than enough space so if any of you know what can solve this problem then please let me know

    The app is compressed and needs swap space to install. As a rule of thumb you need 3 times the listed size of the app available, or in your case 4.6GB. You only have 1.7GB.

  • I recently did an apps update and now the update is locked and I have 15 apps I can't open. Any suggestions on how to fix this?

    I recently did an apps update and now the update is locked and I have 15 apps I can't open.  Any ideas on what may have caused this and to fix it?

    If Ralph's suggestion doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • I had to reset my laptop and now iTunes doesn't recognise the computer so I can't synch my iPad. Any one know how I can get this changed?

    My HP Compct laptop was dying a slow death so I had to reset it to its original factory settings. Now iTunes thinks it is a different computer, any idea how I can rectify it?

    Yeah I have the original CDs. And I have backed up some stuff. But shouldn't things like safari and itunes be working anyway? The applications are there, they just won't open. Someone told me would lose my preferences and just had to update them again, but I can't do so cause safari doesn't work and internet explorer won't let me get on certain sites...

  • My iTunes music has disappeared...and when I tried to import it once again from my CD's it would not accept my music...it seemed to remain stuck...and now when I click on the iTunes icon...it won't open up for me...

    Hello, I sure hope someone can help me. My itunes music has ALL disappeared....and when I tried to replace it {I guess it's known as import it from my CD} it seemed to remain forever on 0.02 and would not move on to the other song....I became frustrated....and ejected the CD....and got a pop up window telling me pretty much that this was a no-no....anyway...I clicked on my itune icon to open it up and start with another CD to import music....well now my icon won't open and everytime I click on it to open I get a pop up window from Apple...asking if it is ok to make changes....I click yes...and nothing happens....I also tried to see the compalibility and it is now telling me it is not combatiable......well it was yesterday and the day before...and even a few minutes ago...when I was able to open it once....What does this mean? I just had my computer cleaned out.....could it have been something they did? Do I have to uninstall it and reinstall it?? Also when I first opened itunes....I got a pop up window saying something to the effect...that I had 2 itunes and was only allowed 1....and did I wish to transfer my purchases....and I can't remember what else it said....I chose transfer....and those were the only songs I could find on my itunes before it wouldn't let me open it again.....Can someone help PLEASE.....newbie here

    You can't activate any GSM iPhone without a valid sim card installed in the phone.
    So, yes, you need to get a sim card.

  • I recently updated itunes and now none of my devices connect to itunes. Any one know how to fix this?

    I recently got a message saying I could update my Itunes so I did, but now none of my devices show up when i hook them up, can anybody help me with this problem?

    Hi cwarren90!
    I have an article here for you that will help you troubleshoot this issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

Maybe you are looking for