I recently upgraded to iWork v9.0.3, but when I access each applications the versions are different (i.e. Pages V.4.1, Numbers V2.6, Keynote V5.1.1) with a install date of 3/18/09 -- which is not the current install date of 2 weeks ago. Why?

I recently upgraded to iWork v9.0.3, but when I access each applications the versions are different (i.e. Pages V.4.1, Numbers V2.6, Keynote V5.1.1) with a install date of 3/18/09 -- which is not the current install date of 2 weeks ago. Shouldn't Pages, Numbers, and Keynote show version 9.?? My MAC confirned installation of v9.0.3 and even accepted the software code. With this discrepancy, how can I determine if the latest was installed and operational? I even downloading v9.0.4, 9.0.5, and 9.1. When I tried installing these downloads it popped up note stating that a later version of Keynote was already installed.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Similar Messages

I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the typ

I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the type of files I can import. Any help appreciated.

Well, think about it. This is a Lightroom forum. We are here to answer questions about Lightroom and how to solve problems in Lightroom. Your permissions issue is an operating system issue, not a Lightroom issue. I didn't mean to be sarcastic. But there are plenty of Internet resources that will answer that question.
I just went to Google and typed in "change disk permissions", and there are links for the Mac as well as for Windows listed. There's no sense in me rewriting instructions that are already available.

I have upgraded to Lion, and want to upgrade my iPhoto 8.1.2, but when I try it says it was not purchased at a MAC Apple store, which it was. Then it asks if I want to buy 9.2.3, and I say yes. It responds with Product Distribution file can't be verified

I have upgraded to Lion, and want to upgrade my iPhoto 8.1.2, but when I try it says it was not purchased at a MAC Apple store, which it was. Then it asks if I want to buy 9.2.3, and I say yes. It responds with Product Distribution file can't be verified. Maybe damaged or not signed. How do I get this fixed, so I can download the new iphoto's that are available.

How did you move your iPhoto library to the new system? the recommended way is Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formed Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

I want to upgrade iOS from 5 to 6, but when I go to synch everything in preparation, it tells me I will lose all my stuff on the iPhone and iPad which is unique. How can I backup or do a "real synch" (both sides have same data) and then upgrade?

I want to upgrade iOS from 5 to 6, but when I go to synch everything in preparation, it tells me I will lose all my stuff on the iPhone and iPad which is/are unique. How can I backup or do a "real synch" (both sides have same data at end of process) and then upgrade?

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

HT1386 hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Than

hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Thanks.

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

I have recently upgrades to OS X 10.9.3 and cannot access Aperture, (version 3.2.4). What do I need to do to access my library!!

I have recently upgrades to OS X 10.9.3 and cannot access Aperture, (version 3.2.4). What do I need to do to access my library!!

Update your Aperture version to Aperture 3.5.1.
If you bought Aperture as a boxed version with a license key, run Software update from the Apple-menu.
Aperture may be showing in the "Accept" portion of Purchased tab of the App Store.
If you bought Aperture from the App Store, look at the Updates page of the App Store.
Make sure, that Aperture is installed in the Applications folder and simply called Aperture and not "Aperture 3" or similar.
If you did not buy Aperture from the App Store, then the update to 3.5.1 will change your license to an AppStore license. So be sure to sign into the AppStore with the AppleID that you want to use with Aperture, before you update Aperture.
Aperture will update your Aperture library to a new format. Don't open Aperture on your library, before you have made a backup, just in case.

Running Captivate 8 on a Macbook and I am unable to import Powerpoint 2011 (which is up to date) files or slides. I get an error saying that either the file is damaged or I am using an older version of PP....which is not the case.

Running Captivate 8 on a Macbook and I am unable to import Powerpoint 2011 (which is up to date) files or slides. I get an error saying that either the file is damaged or I am using an older version of PP....which is not the case. I tried creating a very simple PP file with just a few words on one slide...ran a compatibility check and all was good. Still could not import that simple slide into Captivate.

OK...found out it did not like me saving as a *.pptx. When I save it as a *.ppt file it imported in correctly. Is this what I will need to do moving forward? I am not sure if I am losing any functionality in the process...

Flash Plug in is crashing after recent upgrade. I tried uninstalling, and reinstalling, still crashing. Firefox and Plug-in are current. What else can I do?

Flash Plug in is crashing after recent upgrade. I tried uninstalling, and reinstalling, still crashing. Firefox and Plug-in are current. What else can I do?

What I suggest you do here is to use Adobe's uninstaller tool to uninstall Flash first of all: http://kb2.adobe.com/cps/141/tn_14157.html
Then reboot, go to http://get.adobe.com/flashplayer/ and reinstall it.
I notice too that you have an outdated version of Shockwave For Director. You can update that via http://get.adobe.com/shockwave/

DvD will not mount but cd-r will When I install the the disc into the super drive the format box comes up which is not the same box that comes up when installing a cd-r.

DvD will not mount but cd-r will When I install the the disc into the super drive the format box (disc utilities) comes up which is not the same box that comes up when installing a cd-r. I check the priference settings under general and it is set to show on the desk top.

Not yet will have to get one from a freind. I bought a stack of the Sony DVD+R and that is all I have.

I rarely check my email on my iPad mini. But when I do hundreds of unread messages are downloaded, all of which I've read on my computer. Then I have to select each message to delete it, or all selected as a batch. How do I see recents only?

I rarely check my email on my iPad mini. But when I do hundreds of unread messages are downloaded, all of which I've read on my computer. Then I have to select each message to delete it. How do I see recents only?

deltajane wrote:
My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream. I did see everything there several weeks ago, so I know it worked. How do I access those from my computer. I can't find how to sign on.
This is the article that will assist with this part of your post:
http://support.apple.com/kb/ht4486
deltajane wrote:
I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
deltajane wrote:
I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone.

I have two macs at my house, and multiple iPhones. I want to keep the same apple id as everyone else, but i want to put my own music only on my iPhone. I want to do this with my laptop which is not the family's main iTune's computer.

I have two macs at my house, and multiple iPhones. I want to keep the same apple id as everyone else, but i want to put my own music only on my iPhone. I want to do this with my laptop which is not the family's main iTune's computer.

If you use the same Apple ID for iCloud on each device, yes. However, you can use the same Apple ID for iTunes content on each device, but different Apple ID's for iCloud, iMessage, FaceTime, etc., on each device. That way, you can have whatever iTunes content you want on each phone, but keep all of the other data separate. You can create another Apple ID here:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId?loca lang=en_US
Must be a verified email address.

Is there any User Exit or BADI- Where LTAP-WDATU is as change parameter ,So during or after Transfer order creation GR date would be as per given logic not as current date

Dear All,
There is a requirement in which when the material (Not batch managed) is getting return from Non WM managed storage location to WM managed storage location than at the time of creating transfer order or after creation of transfer order would like to change LTAP-WDATU (GR date) automatically , So here i am unable to find the right user exit or BADI in which i can write the logic for same. Below is full description of the requirement.
Here we are following Removal strategy "FIFO" while picking the material (Not batch managed) from WM managed storage location (WMS1) & transferring to Non WM managed storage location (ODS) ( than from there it use to go to Production) , at certain times partial quantity use to come back from Non WM managed storage location (ODS) to WM managed storage location (WMS1) and while doing putaway of the same "GR date" use to change which was not the actual when the material 1st time comes to WM managed storage location (WMS1) (before getting transfer to Non WM managed storage location). So here i want the user exit or BADI in which i can write my logic so that GR date ( LTAP-WDATU) would automatically change while creating transfer order or after creation of transfer order as per the "GR date" of same material which last moved from WM managed Storage location (WMS1) to Non WM managed storage location(ODS) because as per FIFO material dated before that would not be exist in the warehouse.
Below is the flow of the material while transferring to production & returning from production.
WMS1 ( WM managed warehouse ) --> ODS ( Non WM managed warehouse) --> Production At the time of issue to production
Production --> ODS ( Non WM managed warehouse) --> WMS1 ( WM managed warehouse ) At the time of return from production
I hope i m clear on my requirement.
Thanks in advance.

1. You have to get a key from SAP to modify the two includes in which the user exits are present.
2. You have to enter statement 'INCLUDE z**. ' in both user exits in the MV45* includes. Then save and activate the MV45** includes.
3. You have to figure out the code that carries out the functionality described in your specifications.
3. Write the code in includes Z** .
4. Now the code written by you will be executed when you run the relevant SD transaction
Message was edited by: Sudhir Bhate

Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the d

Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the download is finished it doesnt restore or do anything and it stays stuck on the plug your ipod into itunes screen somebody please help me.

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I'm having trouble downloading my subscription to a new computer keep getting an error 1 ( another installation going on) which is not the case.

I've trying to relocate and download my subscription to a new computer and just keep getting an error 1 message ( some other download going on-which is not the case) anyone else have this problem

Without proper system information and other details nobody can help you. and this error means what it says - some other install process is still active, even if it may not do so visible. Could be a silent update of a virus scanner or something, could be a botched install of another program, not even specifically Adobe. As a start, always reboot your computer and then try again. For anything else we need much more info.
Mylenium

Pay_us_wages_w2_v is not picking current year data?

Hi,
pay_us_wages_w2_v tabe is not getting current year data, only is getting previous year data.
Like
SELECT sum(w2_wages_tips_compensation)
FROM pay_us_wages_w2_v puw
WHERE puw.assignment_id = 40291--:assignment_id1
AND
puw.year
= '2013'--TO_CHAR(:P_PAY_DATE_END,'RRRR');
Please let me know , if any body idea?. We have to run any Program?
Thanks,
Ramu

At first I was not happy. I didnt understand how it worked. I wanted to keep my unlimited. It may not work out for everyone but it does for me. I have two accounts. one has 5 lines and the other has two. I pay 150 for two lines on one account. I have the 30 dllr 2 gig package. Then I have a dumb phone for the second line. My other account I have 5 smartphones. I pay around 350 for that account.
Now with the new plans I can combine BOTH accounts into one and make one BIG family plan. All the users in my account do not go over 2 gigs except one but he never goes over 5. Ill get a big data package and save some money. On top of that its UNLIMITED minutes and text which is what we use it for. Ill be paying around 350ish with a big data package..
That is 150 dllrs in savings!! Now since I can add usage controls I can control how much data that one person uses.
Not sure about you guys but to me this is #winning status!

I recently upgraded to iWork v9.0.3, but when I access each applications the versions are different (i.e. Pages V.4.1, Numbers V2.6, Keynote V5.1.1) with a install date of 3/18/09 -- which is not the current install date of 2 weeks ago. Why?

Similar Messages

Maybe you are looking for