I recently upgraded to Maverick 10.9.2 USB Hard Drive no longer shows

I just upgraded to Maverick 10.9.2 and my external hardrive (Toshiba Canvio Basic 3.0 Portable Hard Drive, PN#HDTB210XK3BA) is no longer appearing on my desk top when I plug it in. It shows in the Disk Utliity and I have tried doing a verify as well as a repair and I stilll get the same message...
"Updating boot support partitions for the volume as required."
I did a backup just prior to updating to Maverick so I know the external drive still works. Plus I am able to see the files on my PC when I plug it in to there.
I did try resetting the SMC and the NVRAM/PRAM.
I plugged other externa; drives in (Maxtor, Seagate, etc) and again they did not show on the desk top but did show in Disk Utlity.
I see this has happened to several folks but am wondering how they got it fixed.

You need the printer drivers for Mavericks.. have you loaded them?
You can expect issues as lots of printers are not yet up to date with Mavericks.. if you can find drivers. delete all the previous printers and start over using the new drivers.

Similar Messages

I recently upgraded my Macbook pro with a new Hard Drive. I then transferred the data using Time Machine. Now when I want to backup using Time Machine again, it won't do it as it did before to the same external HD. How can I get it to reconnect?

Purchased a new, larger solid state drive to replace my old drive. I installed OSX then I had Time Machine do it's magic.
Now when I want to do a backup using Time Machine, it tells me that the external HD is full. When I did so prior to upgrade, it would erase old backups and then do a new backup.
Please help. I am worried about losing files, and am tired of seeing the "Time Machine hasn't backed up in xxx days" Error Message.
Thanks.

it thinks yours is a new machine so it doesn't want to start deleting another machine's backups
see the bottom of this page
http://pondini.org/TM/19.html

USB Flash Drive no longer shows on Desktop, it does appear in disk utility. I recently upgraded to 10.8 from 10.6 on both iMac and Macbook and the drive does the same on both.

I updated my Snow Leopard to Mountain Lion and have had only minor issues with some software but I plugged in a USB flash drive and went to format it, it now appears only in disk utility and not on the desktop. I have tried restarting and reseting with the drive in and out, I tried it into my macbook and it does exactly the same there. I can't do anything in Disk Utility so can't access it in any way and it says errors if I try to eject it from DU. I'm not normally stumped but I can't figure this out at all. I'm hoping that someone here could give me an idea that I haven't thought of as it's a large Flash Drive and I really would like to keep using it.
Thanks in advance for any help anyone can offer.

If it has the same (bad) behavior on two different systems then there is a very good chance that the drive is toast.
BTW you'll get better response to your questions if the question actually reflects the problem you are having. In this case it would have been better to say you couldn't access the drive rather then that it doesn't show on the desktop.
regards

I recently upgraded to Mavericks and now don't have access to iphoto. I cannot find my iphoto library to back the photos up before upgrading the iphoto but see the photos when I try to change screensaver? Where are my photos so I can back them up?

I recently upgraded to Mavericks and now don't have access to iphoto. I cannot find my iphoto library to back the photos up before upgrading the iphoto but see the photos when I try to change screensaver? Where are my photos so I can back them up?

The iPhoto library should be in your user folder/Pictures unless it was moved.

I have recently upgraded to mavericks and I cannot get my scanner to work. I tried deleting the printer and reinstalled it but no luck

I have recently upgraded to mavericks and I cannot get my scanner to work. I tried deleting the printer and reinstalled it but no luck

Canon does not support the MP530 on Mavericks, they have not produced drivers and apparently do not intend to,

I recently upgraded to Mavericks and the time machine is failing to backup. Time Machine began only backing up twice a day and now has stopped.

I recently upgraded to Mavericks and the time machine is failing to backup. Time Machine began only backing up twice a day and now has stopped.

This is the error message I got:
2014-03-18 17:02:30 -0400 com.apple.backupd[4971]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/TOSHIBA EXT/Backups.backupdb/Quincy‚Äö√Ñ√¥s iMac size:37
2014-03-18 17:02:30 -0400 com.apple.backupd[4971]: Backup failed with error 2: 2

I have recently upgraded to Mavericks and I am being subjected to additional password requests and the monitor take store ever to boot up. Approximately 5 mins which is way in excess of previous operating system.

I have recently upgraded to Mavericks and I am being subjected to additional password requests and the monitor take store ever to boot up. Approximately 5 mins which is way in excess of previous operating system.

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions
Startup Issues - Resolve
Startup Issues - Resolve (2)

Recently upgraded to Mavericks... was working with Pages documents from previous OS ... Pages is now frozen and I don't dare force quit and loose my old documents.

Recently upgraded to Mavericks... was working with Pages documents created with previous OS ... Pages is now frozen and I don't dare force quit and loose my old documents. How can I "thaw".... unfreeze Pages? Have several pages windows open that I was working on.

I also had this problem after I installed Mavericks: Pages files freezing at close, need to force quit.
Workaround: when saving any document created with an earlier version of Pages, be sure to untick the "include preview in document".
For some reason, this resolves the problem.
BTW "loose" is not a verb. You probably mean "lose".

I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

The only reason I upgraded to Mavericks was because my Snow Leopard OS was 32 bit, which I was told would support only 4GB of RAM.
That wasn't quite right. You can put in as much RAM as your Mac's hardware supports. The division is in the apps themselves. A 32 bit app can't use more than 4 GB or RAM. A 64 bit app can use much more.
For example, as a 32 bit only version, Photoshop CS3 can't use more 4GB of RAM, no matter how much you actually have installed. CS4 or later can use all the RAM you want to throw at it.

Recently upgraded to Mavericks from 10.6.8. Now I can't access Segoe UI Light when in any Microsoft 2011 Office for Mac app.

I recently upgraded to Mavericks from 10.6.8. Now I can't access Segoe UI Light when in any Microsoft 2011 Office for Mac app. When I open files using Segoe UI Light created before the OS upgrade, another font shows up on the page, yet checking the ribbon, it lists the font as Segoe UI Light. Only Light ( Regular, SemiLight, Semibold, Bold, etc. are all accessible) and only Microsoft apps (works fine in Adobe suite). The Segoe UI family is enabled in Font Book. This font is used extensively in company presentations and documents, so I absolutely need access to it. Anyone have any suggestions?
Thanks,
laurieatwork

Please tell me where I can download Mavericks 10.9.5....
I have updated the OSX on my iMAC (mid 2010 ) to YOSEMITE 10.10.1 and I am not liking it, and want to go back to Mavericks. Foolishly I did not make a backup prior to updating to yosemite. :-(
iPAD; Macbook Pro; iMAC 2010
Batduck

I recently upgraded to maverick and i lost 2 apps i want back they are network utility and mail how can i get them back or where can i find them to download

i recently upgraded to maverick and i lost 2 apps i want back they are network utility and mail how can i get them back or where can i find them to download

Hi megamike1969,
I've been losing some apps also in the Dock. As Niel said I think is that you may be able to just drag them back to the Dock, if you can find them.
What I do is open Launchpad and while you're in there, drag the application to the Dock. If you can't locate the apps, then disregard this post.
gl,
kel

Out of the blue today, my gmail will not send. I recently upgraded to Mavericks. But I have had not problem until today. I can receive mail but not send. Any easy suggestions of what to do?

Out of the blue today, my gmail will not send. I recently upgraded to Mavericks. But I have not had problems until today. I can receive mail but not send. Any easy suggestions of what to do?

I have been having the exact same problem for weeks now with gmail. None of my computers will send Gmail (they will recieve) and my Maverick computers (10.9.1) show gmail smtp.gmail.com as "offline". I had installed Post Box and apple support thought it was that i had too many accounts (I have 2 ipads, an iphone (latest iOs), a work and home iMac and a powerbook). I disabled all my gmail accounts in Mail and still no go from PostBox either . I tried connection doctor and it just spins for outgoing and say I either haveve the wrong pw or login - I dont. I terminaled and tested port 465 (according to gmail instructions) and it works (port 25 did not). I can access gmail from the webmail and send/recieve mail from it and it shows up in my webmail outbox. It is configured for imap.I just cannot send mail at all from any gmail account from any apple device using Mail (or PostBox). I am at a loss as was the apple support person who wished me good luck very politely and sympathetically.

I recently upgraded to Mavericks and I now cannot find under the file menu the option to "Save As" in my Numbers application. Where did it go?

I recently upgraded to Mavericks and I now cannot find under the file menu the option to "Save As" in my Numbers application. Where did it go?

In many, many apps Apple has now created a confusing array of "save as..", "export", and "duplicate" all doing essentially the same thing - saving a new copy elsewhere possibly with format changes. Drives me nuts.
But its always there.
Grant

I just recently upgraded to Mavericks. Why does it take awhile to load messages in mail after I click to open them?

I just recently upgraded to Mavericks. Why does it take awhile to load messages after I click to open them?

I should have put more info with my question. Anyway, I regularly use Seamonkey with its built-in mail client because it works so well. I also can use the Yahoo site's mail feature and the mail also goes out instantly once I click on the send button. Only Mail takes up to 32 seconds to send out a mail. I watch the spinning wheel churn until the whoosh sound comes. Not acceptable, that is why I use Seamonkey. Another iMac in the house shows the same low level of performance sending out the mail from that computer, and that computer uses the ultra-fast Comcast internet while my computer uses the AT&T land line. I tried changing some of the settings, like changing the port numbers to no avail. I returned to the recommended AT&T port setting. Since I have never been able to get Mail to work the way I want it, I switched to Seamonkey, but have always been curious as to why it wants to take so long. I like Safari as the browser a little better, but will use Seamonkey because it has it all and works the way it should. Unless a cure for that elongated wait with the outgoing mail is found, I will have to stay with Seamonkey.

I upgraded to Mavericks from 10.6.8 and I no longer have any of my mail folders in macmail. If I look up an email via spotlight, I can find it, so it's in there. How do I restore my folders?

I upgraded to Mavericks from 10.6.8 and I no longer have any of my mail folders in macmail. If I look up an email via spotlight, I can find it, so it's in there. How do I restore my folders?

As an update: I was able to find my archived boxes and emails on my hard drive by doing this:
Open a Finder window.
Select Go | Go to Folder… from the menu.
Type "~/Library/Mail/V2".
Once I was able to get my macmail working properly, most of my mailboxes appeared, however not all and only a few recent emails are in a few of the boxes.
I really need to move the emails from the archive back into my macmail. When I try to import using the mbox method, it doesn't recognize the .mbox even though they are .mbox. Other than re-emailing each individually to myself, I don't know what to do. Does anyone out there have any suggestions as to some easier solution?

I recently upgraded to Maverick 10.9.2 USB Hard Drive no longer shows

Similar Messages

Maybe you are looking for