I recently upgraded to windows 8.1 now my adobe reader XI freezes as soon as i open it. HELP?
microsoft says its not their problem
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script.
Similar Messages
-
Adobe Reader X freezes when I try to open recent files
When I try to open recent files, Adobe Reader X will freeze up and will stay that way until I restart the computer. Even logging off won't work. I recently left it alone for around 5-10 minutes and Windows finally did end up stopping the process, but this is not normal. Any ideas for a fix?
Nope. That didn't do it. It won't even let me end the process AcroRd32.exe. I confirmed that after around 10 minutes, it finally closed on it's own. I just also confirmed that it's a problem with accessing files on my network, not local files. The odd thing is that I can use the Open tool, go the folder and open that file fine, but when I try to open the same file under the recent files, it freezes up. This may have to do with the fact that this is a mapped network drive. Any fix would be appreciated. Thanks.
-
Recently upgraded from Windows 7 to 10. Now EOS Utility app does not work.
Recently upgraded from Windows 7 to 10. Tried downloading photos from my 5D Mark II, but EOS Utility app does not work to Select Images to Download, unlike before. But when I disconnected my External Hard Drive, EOS Utility app main window works normally. I need the external hard drive connected all the time. How can I fix this problem, please? Thanks.
This sounds like a hardware problem with your computer. A USB port puts out a certain amount of power and can be used to power external devices... such as hard drives. But the camera does not use any USB power -- it runs on the power from the internal battery. It only uses the data pins to communicate. But you are describing a situation in which having one device connected a to a USB port prevents a different USB port from working. That can happen if the device in one port is drawing too much power (it can prevent other ports from working correctly.) Did you have this problem when using Windows 7?
-
Tx2525nr upgraded to windows 7 and now f11 recovery to vista does not work
im new here and i hope to get any answers from my problem on this laptop. i owned a hptx2525nr and recently upgraded to windows 7, now i wanted to go back to vista but upon pressing f11 (the original recovery on hard drive), nothing happens. "f11 system recovery" is listed on the lower left but thats it. it continues to load windows 7. I hope people around here can help me.
Hi, I got absolutely the same problem too!!!
-
We have recently upgraded to windows 7, how do i make the toolbars and panel pane larger. They are t
we have recently upgraded to windows 7, how do i make the toolbars and panel pane larger. They are too small to view
A larger monito is only helpful if the resolution is the same as your current monitor, and they tend to have higher resolutions as you get larger, so don't rush out an buy a larger monitor and expect miracles. If you have a 22" now and it's "HD" (1920 x 1080), you'll see some change as you go up in size, but you'd probably need at least a 27" screen at 1920 x 1080 to notice a real difference.
Right click on the desktop and choose Screen Resolution and you can see the current settings (probably the maximum value which is recommended) and other settings you can use. Lowering the resolution will make everything on the screen larger, but less stuff will fit. Used to be, too that ID did not work will at less than the maximum resolution setting for any monitor.
I did not mean to use the larger fonts feature, by the way, as far as I know that doesn't affect the ID user interface.
The point I was making, rather badly, is that those of us with declining eyesight are getting shafted because there is no way to make use of all the monitor potential and adjut the user interface to make things visible. I just bought a 30" monitor to replace my old 27" which had 1920 x 1200 resolution and was pretty usable, things were about the same size as my old sony 20" running at 1600 x 1200, but even though it is larger in terms of screen size, the new monitor is even higher resolution and things are actually smaller. The only reason I can use it with ID is I know where everything is. -
I am trying to install Photoshop Elements on my new Windows 8 computer (I recently upgraded my windows 7 computer where Photoshop was working fine on before). It says the serial number is invalid. Do older versionsnot work on Windows8, or do I need to uninstall it from my old computer first?
You are allowed to have two activated installations. If you happened to have one on this Windows 8 machine before, it is possible that the activation used for it was never deactivated (did you deactivate it before you upgraded Windows?). Talk to Adobe support thru chat. They might be able to resolve this with you:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
I have an iphone 4 that I recently upgraded to IOS 7, and now I cant drag music to it. It says "preparing to update" eternally. Weird thing is... I have an iphone 3s that is IOS 6, and it takes new music all day. arg.
I have tried direct connecting the iphone 4, via wifi, everything. I hate itunes with a passion, but it seems to be a necessary evil. I dont know why I would have no trouble with my iphone 3. I am using the same technique for both phones. Find the music I want in the library and drag it to the iphone. Works on IOS 6, not IOS 7.
WHat else should I try?Hi jeffmbellucci,
If you are having issues dragging music to your iPhone 4 after a recent upgrade to iOS 7, you may want to verify that the phone is still set to "Manually manage music and videos." You may find the following article helpful:
Apple Support: Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
Regards,
- Brenden -
PSE 10 installed on windows 7 desktop and recently updated on windows laptop. now PSE doesn't work on either machine. How can this be fixed?
uninstall pse 10 (properly using the adobe uninstaller).
clean - Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
then try reinstalling using the adobe installation file(s).
if you see an activation count error while trying to reinstall contact adobe support, https://helpx.adobe.com/contact.html
and ask for an activation count reset. -
I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?
apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together. -
I am running XP SP2 fully patched. I recently upgraded to 3.6.3 and since then, clicking on an icon that normally would open another windows (for example, a printer-friendly version of the current web page), nothing happens. In these situations, I have been forced to go to IE or Crome in order to accomplish what I need to do. Very frustrating. Also clicking in the slider area has no effect. "Page Up" and "Page Down" keys work. Holding down left mouse button on slider works. Also very frustrating. Can someone help
== This happened ==
A few times a week
== Upgraded to 3.6.3.Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
I recently upgraded iPhone4S to iOS7. Now photos on my phone look like photo negatives; all colors are a ghostly contrast. The same is true for icons of downloaded apps. What can I do?
Invert the colors back to normal.
-
I recently upgraded from leopard to lion, now I can't open iPhoto get the message 'you can't open the application iPhoto because PowerPC applications are no longer supported'. I had no idea that this would happen - what can I do?
What version of iPhoto do you have?
Regards
TD -
Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!
Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist. Verify that you have access to that directory.Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist. Verify that you have access to that directory.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Vista instructions in the following document: Check your hard disk for errors
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I recently upgraded to windows 8.1. I downloaded elements 7 to new computer and entered my serial number when requested but Adobe says the number they gave me is incorrect. What is going on?
You might be using the wrong number. Try chat for some help:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
I recently upgraded to snow leopard and now every time i open iCal i get multiple events to update in iCal. Except I don't know where these are coming from or why. I've check iCal preferences and Help - can't find a way to stop this from happening automatically. Any Clues? Also, some of the events are already on my calendar and have been for quite some time.
Greetings,
What do you mean by "events to update"? Do you mean invites to new events or changes to existing invites?
Troubleshooting:
1. Your profile indicates you are running 10.6.7, 10.6.8 is the current version Apple > Software update.
2. First make an iCal backup: Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
3. Launch iCal and test.
Hope that helps!
Maybe you are looking for
-
Creating remote objects and passing the retrieved data to modules
I found at this Adobe tutorial a nice "RemoteService" class that creates a RemoteObject and contains the functions for handling the result and fault events. If I wanted to use this approach, how could I pass the data from the result handler to int
-
No sound on hand set ear piece
I have an iphone 4 with the ios5 update, and I can only talk on the phone using the speaker phone. If I try to talk on the handset using the earpiece I can't hear anything the other person says, but they can hear me. I've tried restoring my phone to
-
I have copies of the bookmarks, passwords, etc ready to put on the new computer with Windows 7 but they put things in different places than the other Windows. So where do these files go?
-
Partner for Operational Support
Does anyone have any recommendations for a partner for low cost ongoing operational support for CRMOD? This would include general application configuration, workflow, reports, web services, etc. Thanks!
-
Hi all, I have got the problem with f7 button. So I want to execute the user defined function when the f7 is pressed. I just want this functionality with the only one form. I've forms 6i version. When I referred the Old posts then in those posts it i