I recieve mail but am unable to send mail! Bill

I can receive mail on my ipad but can not send . Any suggestions?
Bill

It would help to tell us what kind of mail service you have (POP and/or IMAP), what providers you use, do you only have one email account and if not, do all of them prevent you from sending?  Have you ever been able to send, how long has this been going on? 
My guess is that you are not using the right server for email output; are you sure you have the right address, did you define one in the setup?

Similar Messages

  • HT1277 I can recieve emails but I can't send them out.  The blue bar at the bottom left of the Mail page gets half way across and then the pop-up "Cannot send message using the server" comes up?  What do I do?

    I have my Yahoo Mail "poped" over to Apple Mail.  I can recieve emails but I can't send them out.  The blue bar at the bottom left of the Mail page gets half way across and then the pop-up "Cannot send message using the server" comes up?  What do I do?

    Your outgoing mail server is different than your incoming server. Usually the outgoing mail server will have smtp in it. I noticed yours said "cannot send message using the server mail.wavecable.com". That sounds like an incoming mail server. Try setting your outgoing mail server to smtp.wavecable.com
    I hope that helps.

  • TS3899 I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) acco

    I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) account. I get the error message "A copy has been placed in your Outbox. The sender address "name"@tiscali.co.uk was rejected by the server".

    Hi apmichael,
    If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Regards,
    - Brenden

  • Why can I recieve e mail but are unable to send them on my i pad

    WHY CAN I RECIEVE E-MAILS ON MY I PAD BUT ARE UNABLETO SEND ANY

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • New Doro PE 508, old sim 07808800489 [ex Orange] but am unable to send texts.Why

    Unable to send texts, but do recieve texts and calls. How do I correct this problem?Do I need to register something or somewhere?

    Where did you buy the Doro from? If EE then it's locked to EE and Orange SIMs won't work in it. They are diff networks.
    You need to get a replacement SIM. Take phone & old SIM into an EE shop & they'll transfer credit, no. & (SIM) contacts to SIM of correct size for free or order online https://explore.ee.co.uk/Order-a-new-SIM for £10.

  • Office 365 w/ADFS & DirSync: User can receive emails but is unable to send.

    I'm catching hell with one user in an organization of about 20 users. This afternoon he began having issues sending emails. From Outlook 2013, if he attempts to send, the messages get stuck in the outbox. In OWA, the get moved to the drafts folder after send is pressed. If you navigate to the same message in the drafts folder and try to send again, you get a little notification at the top right that says "couldn't send hte floowing message: ", then if you click on that, another error shows "You don't have permission to perform this action." He is also unable to send from his phone activesync. I have noticed that about once an hour, it seems like a few messages will deliver from the outbox. The first time this happened, I immediately tried to send another message but had the same issue and error. I'm absolutely stumped on this one. If I...

    Hey SpiceHeads,For those of you using the Spiceworks 7.4 application, make sure to read Babbitt (Spiceworks)'s update.Also, we're upgrading the search we use for various parts of the community this weekend. Due to this, we're going to have to rebuild various indexes within the community which means you may notice some weirdness when using Quick Search (aka "/"), tagging, and the listing of topics in groups. This should be starting momentarily but may run throughout the weekend.TL;DR - You'll notice some quirks but don't panic, it'll be over Soon.

  • HT4519 I have loaded my email address on my Ipad but I can recieve mail but is unable to send mail

    Email account not sending mail but can recieve on Ipad

    Your outgoing server settings are probably incorrect. Check them.

  • I am an iPad novice and whilst I have managed to set up my personal email, I have having trouble with my business email in that I can receive emails, but am unable to send and the message says 'this email address has been rejected by server'

    I am an iPad novice and whilst I have managed to set up my hotmail account on the iPad - I ham having trouble with my business email (I can receive emails, but cannot send and it says' email rejected by server'

    That sounds like a settings issue to me. Check with your IT depatment to make sure you have it configured properly.

  • HT1277 Mac OS X 10.6.8: Help i can receive emails but am unable to send? No updates available and i have verified the settings?

    No updates available and i have verified the settings?

    Apple - Support - Mail Setup Assistant
    Mail: Troubleshooting sending & receiving email messages (OS X Lion, Mac OS X v10.6)

  • I cannot send nor receive emails. The message I get is that I need to type in my account password which I've done but still unable to send or receive. I get texts fine

    My Iphone 4 is new, and I have been able to send and receive texts, but cannot send nor receive emails. I get the message that I need to input my password for my yahoo account which I've done many times. When I type messagefor outgoing it only allows me to save as a draft. Any ideas?

    Are you positive you're typing the correct password in? You might want to try and reset your password, and try again.  You'll get texts because it isn't connected to your email account. 

  • I used to be able to email photos on my ipad 2, can no longer do that.  i have looked at several setting but still unable to send photos

    it goes thru the steps but never gets sent.  all the pics i tried to send have a exclamation mark on the unsent email.  help

    ok, i deleted my hotmail address from the ipad and then added it back in, works, i think the problem was when i changed my password a few months ago on the hotmail acct in my home computer.  all better now!!!!

  • I recently downloaded iOS7 onto my iphone 4S and now when i send messages, it sends and goes through, but it still says sending at the top. Yesterday, I was able to recieve messages but I couldn't send them at all. Please tell me how to fix it thanks :)

    Please help, its really irritating considering that this problem started happening after I downloaded iOS7, never before that

    Hello GregorySC,
    In order to send and receive SMS or MMS messages, you will need to have an active cellular data or Wi-Fi connection.
    You will need these to send and receive iMessages:
    An iPhone, iPad, or iPod touch
    iOS 5.0 or later
    A cellular data connection or a Wi-Fi connection
    A phone number or Apple ID registered with iMessage in Settings > Messages
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Cheers,
    Allen

  • Unable to SEND mail using Activesync in Exchange 2010 server on iPhone or Windows Mobile 6.1

    Hi All,
    We've been setting up a new SBS 2011 server for a client this week. Everything is working, except the staff have 4 x iPhones to connect with Exchange ActiveSync.
    There are 2 x iPhone 4's and 2 x iPhone 3Gs's. We can setup the Exchange accounts on each of the phones and they are all able to sync mail and calender etc with the server.
    The problem we have is when any of them try to send mail from the phone, it gives an error : "Cannot Send Mail - An error occurred while delivering this message" and it sits in the outbox on the phone.
    The newsgroups and forums are littered with people having issues with IOS4 and Exchange 2010 but most of these are from June-August 2010 when IOS4 version was around 4.00 or 4.01
    A lot of these people had iPhone 3 handsets running with IOS 3.1.3 which worked with Exchange 2010 but when they upgraded to IOS 4, they had this problem sending mail.
    It seems that for most of them, the fix came in the form of IOS version 4.1 which fixed the send issue for them.
    We have a variety of Hansets and IOS versions (including an iPhone 3Gs running IOS 3.1.3) but are unable to send mail from any of them:
    iPhone 3Gs    IOS 3.1.3
    iPhone 3Gs    IOS 4.3.3
    iPhone 4       IOS 4.3.3
    iPhone 4       IOS 4.3.5
    I was surprised that the iPhone 3Gs running 3.1.3 was unable to send either as nearly all the forums etc I read with this issue said the iPhone 3's worked with that IOS version.
    Today we used a test iPhone 4 handset from our office to connect to an almost identical Small Business Server 2011 we setup two weeks ago for another client.
    The test iPhone 4 was able to connect, Sync and Send email on that server but when set it to connect to this SBS 2011 server, it gets the "Cannot Send Mail" message the same as the others. So clearly the handset is working (on the other server at least),
    it must be something misconfigured in this Exchange server right?
    We ran the Exchange Remote Connectivity Analyser on the Exchange server and got green ticks across the board.
    Outlook Web App and Outlook Anywhere both work normally. Everything we can test on the Exchange server works except sending from any iPhone.
    Having said all that, I just setup a Windows Mobile 6.1 handset to sync with the Exchange 2010 server as a test, and it appears to have the same issue.
    It will connect & Sync Mail, Contacts and Calendar but if trying to send an email from the phone, it will just sit in the outbox.
    Does anyone have some insight into what the problem may be?

    Further to this .. I found the solution on a MS Exchange 2010 support forum.
    It was not a certificate or firewall issue, looks as thought the “Accepted Domains” in Exchange Mgmt Console –
    Org Config – Hub Transport cannot have any spaces in the name field.
    I had some spaces and the emails were not downloading fully and able to send. Once I removed the spaces from the Name field and
    restarting the Exchange and IIS services emails were now being sent and received ok.
     Check
    out :
    http://social.technet.microsoft.com/Forums/en-US/exchangesvrmobility/thread/321eae51-9cbd-4a5e-85c1-68d8f7b523c3
     This
    is good one to add to your knowledge bank in case you come across it in the future.
    Rgds Gerry

  • ICloud mail server - Unable To Send With Apple Mail client

    OS X 10.10.2
    Mail v 8.2
    iCloud mail
    I am still able to receive messages but suddenly unable to send. Messages stay stuck in Outbox.
    Mail Connection Doctor reports no problems:
    If I setup MS Outlook for Mac 2011 with this iCloud account, I am able to send and receive like a champ.
    Once it starts working, is there a way to change the outgoing mail server to use SSL, i.e., turn SSL to "ON" ?

    Yes, I did. It doesn't show up in the logs because, I'm unable to send a message - it goes to the outbox immediately. And this led me to the conclusion below.
    And by the way, I did get in touch with Apple Support who went through a number of troubleshooting scripts (including trying to use GMail's mail servers) and ultimately had me reinstall OS X from scratch. None of this worked.
    Now this problem of being unable to send mail via my iCloud account, from the Apple Mail client, started only around the end of Feb. What I finally figured was that iCloud mail was using random ports on my machine to invoke its SMTP port. Everytime I would disable the firewall on my router completely, iCloud mail was able to send just fine. Recall that incoming was (and still is) working fine. Anyway, I installed wireshark to ID the ports that were being used when the firewall was down. I set up triggers on my router to open these up, turned on the firewall, but it just isn't working. I will have to play around with wireshark and see if I can figure out what ports need to be opened. Unless you or someone else knows. If I figure it out, I will post it here. Mind you, that I need to figure out not only the source ports that need to access port 587 but also what the real target port is (because I don't think it is just 587 as Apple claims).
    By the by, when I asked the Apple Technician (some guy who I was transferred to after 3 other people - the one who asked me to reinstall Yosemite) if there was a way to change the outgoing mail server to use SSL, i.e., turn SSL to "ON", he said no there wasn't and why would one need to secure the traffic to Apple's SMTP server anyway? Seriously?

  • Mail unable to send any emails

    Hi,
    In my office I have setup my MacBook Pro Mail. I can receive emails but can't send any out. I read that I should use Connection Doctor. I know my incoming mail server address but not the smtp. How should I trouble shoot?

    guys refuse to share the outgoing server details. Hence, I am only able to retrieve my emails but am unable to send out.
    Perhaps they are not clear on what settings you need? The settings you need are what any user with any computer (Mac, Windows, Unix, Linux, whatever) would need to configure their email program. You aren't asking for anything special here.
    Consider showing the article I mentioned (http://support.apple.com/kb/HT1277) to your IT person so he/she sees what it is your are looking for (and why...you want to use your email).
    If that does not work you might want to seek someone higher up the IT chain to talk to (Or go to your superior and ask them to intercede as you are being denied what you need to use your tools.)
    Asking for one's email settings is not like asking for nuclear missile launch codes from the US government. If you are someone who has an account given to you by your organization you need the settings to use the account assigned to you. Unless of course they intend for you to only be able to receive and not send. In which case, everything is as it should be.

Maybe you are looking for

  • Urgent : Unable to maintain the Number ranges for Excise Groups

    Hi CIN experts............ In Development server I created 3 excise Groups (E2,E3 and E4), the same I was transported to Production. J_1IRG23A1, J_1IRG23A2 object number ranges are Excise Group specific. When I go to Tools - Number Ranges to maintain

  • Bursting with multiple data sources

    Hello all, I am working in a retail environment and we are building reports for the stores. There are several reports and they all receive the same reports. We are using BIP Entreprise with the bursting feature and it works very well. The problem is

  • Multiple Checkbox Insert Handling

    Every so often, I need to refresh my knowledge regarding how to handle multiple check box selections, and how they get handled on an action page to insert correctly in a DB. In a helpdesk application, the admin assigns projects to technicians. He may

  • How to clear National Security Agency malware

    I am locked out of safari. Get a "National Security Agency warning that access to files is denied unless I pay a fine..blah blah bhah. I need to figure out how to get it off!

  • C Function - SSF_ABAP_SERVICE - Problem in return code.

    Hi all, We are actually executing a custom program with standard FM - CCARD_DEVELOPE which does a decryption of credit card number. This FM inturn calls another FM SSF_KRN_DEVELOPE which inturn calls C function SSF_ABAP_SERVICE. It is working fine in