I recieved a new 4s today in replacement for my other one shutting down after installing the new update. Made a phone call, person on the other end cant hear me though i can hear them! im about to loose my block...what is going on? Help PLEASE :-(

So, i recieve a new TODAY due to my other ones software stuffing up due to a stuff up in the new software update. Alls well and good, i leave the store drive home which is a hours drive mind you, make a phone call we talk for a while, it cuts out. I didnt think anything of it. Next phone call the person im speaking with cant hear me, 5 phone calls later i turn on speaker phone horray they can hear me. WHAT IS GOING ON??? I have had that many problems with my iphones but this is behond a joke...brand new phone thats already not working!!!!! I've tried to restore it and do everything i can but its not fixing anything. Im hoping someone out there can help because im done with Apple after this because this ludacris. Thanks in advanced :-)

If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434

Similar Messages

Jumpy mouse and shut-downs on G4 mirror door when putting to sleep or just random shut down after install of new 2nd internal WD IDE 320 gig hard drive, OS 10.4.11, orig HD is WD 80, RAM = 2 gig. Help!

Jumpy mouse and shut-downs on G4 mirror door when putting to sleep or just random shut down, is now occuring after install of new 2nd internal WD IDE 320 GB hard drive, running OS 10.4.11, orig HD is WD 80 GB, RAM = 2 gig. Help!

Hi Ted,
At this point I think you should get Applejack...
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
Ignore the MacKeeper ad no matter what else you decide.
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.

I can't download the latest update and my phone loses WIFI all the time. When I try to connect and put in my password, It just keep searching and searching.

I can't download the latest update and my phone loses WIFI all the time. when I try to connect and put in my password, it just keep searching and searching.

You can download the latest iTunes (version 11) here:
http://www.apple.com/itunes/download/
If you just want to stay with version 10, you can get 10.7 here:
http://support.apple.com/kb/DL1576

8.1 can't shut down after installing itunes

I recently reformatted and did a clean install of window's 8.1
I have done all updates, both windows and drivers and the machine is very smooth and stable.
After installing iTunes the computer will no longer shut down, it displays the logging off / shutting down screen but then just reboots.
I have attempted numerous resolutions to no avail, i.e. disabled NIC as bootable device, disabled the hybrid boot feature & flashed and tweaked some BIOS settings.
The computer will not even shut down when I give the command "shutdown /s /t 0"
I only had Windows Office and iTunes installed on the computer and suspecting that iTunes may be the culprit, I uninstalled it and now the computer shuts down without any issue.
I have since read several threads about iTunes and shutdown/restart issues with 64 bit versions of Windows although I have not found anyone else with my exact issue.
Is anyone aware of a resolution for this?
For now I will need to install iTunes so I can sync my phone and then uninstall so I can shut down!

Fingers crossed there will be an update for this, I was lucky that my install so was new that there weren't very many things that could have caused it because I don't think it would have ever occurred to me that iTunes was the issue.
I literally tried every other possibility before waking up in the middle of the night and realizing that the problem started right after I installed iTunes.
I have had issues with Apple software in the past where I attempt to disable it from launching automatically when I boot the computer and it will simply create another entry for itself in the startup list.
If I disable that one it makes another, and another and another.... It's like the freaking Apple hydra.
The want me to know how much I need them! lol

How to shut down after installing new OS?

Hello,
I am selling my MBP, so I used the Snow Leopard desk to "wipe" my data from the machine, and then I re-intalled OS 10.6. Now the computer is at the "welcome" screen as if it was just purchased at the store. It asks you to select your country, your languge, etc, and then it asks if you are restoring from a Time Machine backup or what exactly you'd like to do.
My problem is (and I know this sounds stupid) I don't know how to turn the computer off now that it's as this "beginning" stage. It doees ot have the usual selections at the top of the screen (like the Apple Menu, etc), so I'm not sure what to do. For now, I just closed the lid and I'm hoping that it worked and it's currenlty sleeping.
But I'd like to be able to shut the machine down so that I can ship it to the new buyer.
Thanks for any help!
PS: I also have the new iLife that I'd like to put on it (it had it before I wiped the data), but I can't figure out how to do that either. The machine is not setup for a user yet, and I don't want to mess it up for the person who is buying it. Is there anything I can do that will allow me to install it?

wjosten wrote:
Not a problem, my reply is directed at others that might view this thread.
My reply was completely correct, other then ejecting the DVD. But then you really don't need to eject it as it is going with the computer anyway.
You can always restart the system and then eject and then hold down the power button to shut the system down again. Once restarted it will go to the First screen again

4 hrs later - Computer shut down after installing new RAM (mid 2007 Imac)

Mid 2007 imac and I installed new Ram. It worked for 4 hrs then the Imac shutdown. The pressed power button but no power. Unplugged and replugged the power cord and 3 beeps sounded. I am wondering if it worked for 4 hrs or so, then why did it would it fail 4 hrs later?
I am running the correct ram because in system profiler under memory - it said that everything was ok.
Any ideas?

or maybe the back tray wasn't tight enough?
I re-installed it now and so far so good.... I pressed tight and in an upwards motion. We'll see what happens

Z10 shutting down after installing new OS

Since I installed the new OS on my Z10 my phone has been randomly shutting down and rebooting. Last night it shut down for more than an hour. It was if the phone were completely dead.

http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-OS/td-p/2187545#nobanner

My ipad2 was working fine last night, but this morning is unable to connect to ANY wifi networks (though it can detect them). All typical solutions fail. What can i do?

My ipad2 was working fine last night, but this morning when I woke it up... it no longer was connected to my network. While it can detect networks, it cannot connect to any (have tried at home and at work). I have tried: resetting router, resetting ipad, forgetting network, renewing lease on network, ensuring airplane mode is off, resetting network settings, turning wifi on/off. None of the typical solutions I can find online seem to work. HELP!

You've gone through all of the basics. You might look at this document regarding potential issues with wi-fi environments.
http://support.apple.com/kb/HT4199
If none of that works, and if a device restore doesn't work, it's time for a trip to the Genius Bar.

Can't shut down after installing new monitor

I just connected a ViewSonic VA720 flat panel monitor to my G4, running OS 10.4.11 and now when I attempt to shut down, my computer's fans rev loudly for a moment before restarting the computer.
Btw, I had to adjust the screen resolution to 1280 x 1024 and the refresh rate to 60 hertz in order to use the monitor.
Any suggestions? Thanks!

Try a NVRAM reset. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
 Cheers, Tom

When I phone with my iphone 4 they don't hear me but I can hear them. What to do about that?

When I phone with my iphone 4 they don't hear me but I can hear them. What to do about that?

Try disconnecting the headphones and then adjusting the volume, does it say headphones?
If it does, there might be something in the headphone jack, maybe lint, dirt, or something else in there.
You can try getting it out by connecting the headphones 5-10x or spraying compressed air into the jack.
If it doesn't say headphones or there isn't anything in there, try restarting or restoring the iPhone.

IPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them

iPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them. Signal is strong and call quality (me hearing the other) is still very good but it looks as if I’m going on mute while I’m not muting my iPhone. When dropping the call and re-dialing it works fine again. It’s a brand new iPhone 5S but it now happened already 4 or 5 times in 2 days.
It feels like a hardware/iOS problem and not a network issue. It happend with iOS7.03 but I just see 7.0.4 is available so will install that one now.
Thanks in advance for feedback
Best regards,
Marco

Hello Jeff,
Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone. I would be concerned too if the audio on my iPhone was not working unless using speaker phone. I found an article with some steps to take when you are experiencing issues like this:
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M.

People stop hearing me but I can hear them!

Hi,
I hope someone can help me with this. I have had my BB for about 8 months and for the last two months for some reason during phone calls people stop being able to hear me. I can hear them perfectly but they can't hear me at all. It is usually after a longish call but it is starting to happen more frequently--i.e.. more than 4 times in a week and after only a 5 minute call. Very frustrating as this is my only phone and my phone calls tend to be important.
I can usually get up and working after hanging up but I occasionally have to take the battery out and wait a bit. I called TMobile and the best they could do was tell me to take out the battery and send me a new security package. This didn't help. My software is up to date. I am using BB desktop for mac.
Can anyone share any ideas? Do I need a new phone?
Thanks!
India

Hello,
i have the same issue and as i can see in the internet many people have the same problem.
Since i tried to find a solution and i could not, i started observing when i had the issue and i discovered that this most probably happens due to temperature increase. I live in a hot country during the summer and the problem appeared when the temperature was high and also i had use my phone alot playing around with apps.
The problem was happening randomly but once it happened i immediately put my iphone to the refrigerator for 5 minutes and then i could make calls succesfully again.
Please try to observer yours as well in order to confirm that this is the problem
-------------------------problem describtion------------------------------------
often the other party can not hear me speaking when making calls over the GSM but mic works fine for skype, recording etc

Im 6 days late on my warrinty and I had no clue I was. And now when I call people and when they call me they cant hear me, but I can hear them.

Im 6 days late on my warrinty and I had no clue I was. And now when I call people and when they call me they cant hear me, but I can hear them.

Apple Store Genius makes all decisions regarding implementation of Warranty Coverage. Maybe you have AppleCare coverage and don't even know. If the Genius decides to cover under Warranty then it was worth taking to Apple. If Genius decides no Warranty, then replacement iPhone 4 is $149.

When i switch to facetime or speaker phone my contact can't hear me tho i can hear them...how do i fix it ?

when i switch to facetime or speaker phone my contancts can't hear me although i can hear them... how can i fix it ?

when using the regular phone to make calls, can your contacts hear you?
do you have anything covering the top mic? i believe that is what is used when using speakerphone and/or facetime, but i am not sure...

When using Skype with my MBA people can't hear me but I can hear them. Please help!

When using Skype people cannot hear me but I can hear them. Please help!

Hello there, Maribelita.
The following Knowledge Base article has some great steps to work on resolving the exact issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

I recieved a new 4s today in replacement for my other one shutting down after installing the new update. Made a phone call, person on the other end cant hear me though i can hear them! im about to loose my block...what is going on? Help PLEASE :-(

Similar Messages

Maybe you are looking for