I record audio MPEG with MP3 extension

BACKGROUND
I record short sound audio MPEG clips , that generate a file with extension “MP3”. The bit rate is 128 kbps, which I understand must be increased to  >1’200 kbps
BIT RATES
I did increase this to “total bit rate” of 192’000 but am not sure if that‘s the same as kbps.
CONVERSION
I use an app from Apple called “MP3-Converter”
I then convert the “MP3” file & then find the files in a “My Music” folder, with file extensions : “mp3”,  “m4a” “MP3”.
ITUNES
Itunes will play each file.
GARAGEBAND
I can’t drag these files in2 a Garageband project, either via iTunes  or thru Garageband’s media browser.
WORK AROUND
I downloaded a program called   “Audacity”, which has since disappeared from my Apple Mac. I was able to upload to this program, which converted the file to “.wav”, which I then found in iTunes. I could then move it to a Garageband project to manipulate.
EASIER WAY
There must be an easier way to do this.
SOLUTION
Any suggestions to make this an easier process would be GR8.

Does anyone ever do the same thing before?
What i want is to make sure there is a way that one can
specify a audio codec with which flash player will use to record
the audio data come from the microphone .
thanks
james

Similar Messages

  • How to convert audio files with caf extension to wav

    Hi all!
    I have some audio files with .caf extension that I need to convert to wav. How can I do that?
    Any batch audio converter around?
    Thanks!
    nz_

    Try "Easy CAF Converter for Logic Pro" on the Mac App Store.
    According to an app description,
    "The Easy CAF Converter for Logic Pro automatically converts Apple Loops installed with Logic Pro 9 and X to uncompressed audio formats (aiff and wave).
    With the Easy CAF Converter for Logic Pro, musicians using other major DAWs (e.g., Cubase, ProTools, Ableton Live, and Studio One, etc.) can now easily use the rich set of apple loops of Logic Pro in their music productions."
    App Store location:
    https://itunes.apple.com/us/app/easy-caf-converter-for-logic/id851083620?l=ko&ls =1&mt=12

  • Cannot adjust record audio level with I-Mic as audio in

    Hi,
    I would like to record audio from my stereo through my Griffin Technologies I-Mic connection using Audacity audio software. I cannot adjust input recording audio down even though I have completely turned off the input audio on Audicity. The recording audio is pegging red and the recorded playback audio is completely overmodulated. The audicity help techs believe the problem lies with my sound card, which happens to be the Sound Blaster 24 bit.
    Months ago, I was able to do it, but this time around had no success. Is there something that I can click on the soundblaster that will allow audicity to properly adjust the input audio?
    Karl

    Wow, here I go again.....  I found out how I locked up the audio track of my video file. 
    After I re-imported my original video recording, and had adjusted the volume level, I had to expand my video image to fill my "canvas".  When I went to transform this layer, I was told I must first convert this to a smart object.  As soon as I did that, the track turned from blue to purple!  
    I would hope that if I edit my original video track in such a simple way, that I would NOT loose access to adjusting the volume of my video track......  But that is the odd way that this works.............
    Chuck

  • Recording Audio through/with Flash

    Hello,
    We are working with a client who has a project that they need
    a customer to record audio from their computer. We want to do the
    designs in Flash. Does anybody have an idea or suggestion on how to
    record audio through flash (swf) or what software would be useful
    in conjunction with?
    Thanks!

    You can capture audio from a microphone quite easily in
    Flash:
    var mic:Microphone = Microphone.getMicrophone();
    mic.setLoopBack(); //Routes audio to speakers
    However saving audio has always been a problem in Flash. It
    is a tricky work-around process. You can only send to a server
    running Flash Media Server and then convert the audio using a tool
    like the one used for this project:
    http://blog.andrewpaulsimmons.com/2007/05/recording-audio-with-flash-player-to.html#links
    Recorded audio in Flash uses the NellyMoser codec, which is a
    low quality mono only audio codec designed for voice only. I found
    a decoder here as well as the one listed at the link above:
    http://code.google.com/p/nelly2pcm/downloads/list
    Hopefully Flash will improve in this field in the
    future.

  • Recording audio portion with two headsets

    I would like to use two people/two headsets to record the
    audio portion of my captivate software demo. We are using two
    digital headset microphones, each with a USB connection
    (Plantronics Gamecom | Pro 1) within a VMware session. The visual
    portion records just fine, but only one headset picks up the audio
    portion. The second headset doesn't pick up anything.
    Ideas on how to get BOTH headsets working while recording?
    (We just spent money on the headsets and would prefer not having to
    spend more money on a single, but shared, microphone that sits on a
    desk; plus we're under a tight schedule :-)

    Sorry I don't have an answer for you - directly, anyway. I do
    understand why you might want to do the dual-mic thing, but I don't
    believe Captivate can handle the double-source audio.
    I would recommend (unless someone here has a better answer)
    that you use your dual microphones and take your script outside
    Captivate to do the recording, then use the Audio Import function
    to bring your saved MP3 or WAV audio into the project that way.
    Best of luck, and welcome to the User Community!
    .

  • Are plug-ins applied in the recorded audio file with GB2?

    I have a very basic question and I think I know the answer but I just want to have a confirmation. I am using the ChannelStrip plug-in from Metric Halo, which is great by the way, I am wondering if the process is applied directly in the audio file when I am recording a track or if it will only be when I export the track to iTunes? For example when you process a file with a software like PEAK you must indicate that you want the plug in to be applied to the audio file unless it will leave the original audio file unchanged.
    Thanks in advance!

    If I can remember rightly, a sound recordist friend of mine had one of these units and there was a problem importing the audio from it into pro-tools and avid. I do remember though it was a firmware update that eventually fixed it.
    Also does this thing record dual stereo channels onto one .wav file, or two seperate .wavs?

  • Reading and Recording audio waveforms with SoundBlas

    Does any of the Soundblaster hardware or software have the ability to record an audio waveform. Specifically, if I put an audio input into the soundblaster, can it read and recored the waveform's voltage value?

    Just in case some one might need it, I solved my problem:
    I simply needed to initialize the AudioSession before playing/recording. I did so with the following code:
    OSStatus err;
    AudioSessionInitialize(NULL, NULL, MyInterruptionListener, self);
    UInt32 sessionCategory = kAudioSessionCategory_PlayAndRecord;
    err = AudioSessionSetProperty (kAudioSessionProperty_AudioCategory,
    sizeof (sessionCategory),
    &sessionCategory);
    AudioSessionSetActive(TRUE);

  • HT204382 how do i make a voice file with mp3 extension using my imac?

    I tried using Quicktime and picking audio file and using the microphone and burning the voice file but my cd player that i need to use only plays mp3 files and the files that are burned are only mp4.  please help

    ITunes will convert to mp3

  • Recording audio voice with single microphone but getting stereo output

    I am trying to record a voice recording to a video using a Scarlett microphone.  I can only record in Mono.  How do I get the voice out of both speakers when playing back and/or record on both sides using one microphone?

    After you add the sound to your timeline search the help file for the "fill left" or "fill right" command

  • Is it possible to send and recieve audio signal with AI / AO in NI-6229 which is DAQ board.

    I'd like to test MP3 Player.
    The procedure is below.
    1. Send a audio signal of 1kHz from mp3 file in PC through AO in NI-6229.
    2. Record it with MP3 player.
    3. Play a recorded audio signal with MP3 player.
    4. Recieve the signal through AI in NI-6229 and measure frequency and voltage of the signal.
    5. Compare the signal with original signal.
    Do you think it is possible?

    Hello Blue Sky80,
    It is possible to measure audio signals using LabVIEW and Sound an Vibration toolset.  Please take a look at this Developer Zone article on Audio measurements using LabVIEW to get more information on this subject.I hope this helps!
    Regards,
    Ima
    Applications Engineer
    National Instruments
    LabVIEW Introduction Course - Six Hours
    Getting Started with NI-DAQmx

  • Recording Audio with Lumia 920.

    Hello,  I will be upgrading to a Lumia 920 (currently use an iPhone4s) and have a question about audio recording.  I know you get great sound when recording a video, but can you record audio only with the 920? 
    Thanks,
    John

    Voice and audio recording
    Audio recording file formats: 3GP, 3G2
    Audio recording codecs: AMR-NB
    Speech codecs: AMR-WB, GSM FR, AMR-NB, GSM HR, EFR
    Audio recording features: Mono with high dynamics
    Full specs can be found here
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Record audio for the video

    Hi i am trying to see if there is some way to record audio like with the audio recoreder they sell for previous models but the thing is that it does not work with the video ipod
    so how do you record audio and speeches ect so i can do pod casts and stuff?
    also trying to record the my band on it

    Do you mean you want to use the iPod as an audio recorder?
    Currently it is not possible as there are no compatible microphones.
    There are a few in the works by other companies, but as of yet, they have no firm release date (Spring).

  • Vista 64, Latest Driver & X-Fi Elite Pro: Audio issue with Pro Evolution Soccer 2008 (Pes 20

    Hi,i have formatted XP S.P.2 and now i'm using Vista Ultimate 64.I have got an X-Fi Elite Pro and i have installed all the applications using the CD-Rom.I updated the driver, Alchemy and Mediasource to the latest version.The system is totally clean and updated (I used Windows Update when i finished to install Vista and nothing was installed). I would like to know why i cannot play Pro Evolution Soccer 2008 like in XP: when i enter in the game i have a noise (looks like the noise of the needle in old gramophones...) and i cannot use the speakers (Creative ProGamer G500).If i turn the volume to 0 i can hear it too... i have to switch off the speakers or exit the game to delete it.Is it another bug I tried to uninstall and doing a new installation of the game but... no way men... Thanks p.s.After year and 4 months (release date of Vista) is it possible to have a decent driver... The Audio Quality in Vista Ultimate 64 bit is lower than in XP and the same wave files have distortion with the low and middle-high volume (60-70).
    Problems that i have never had in XP... i cannot reinstall XP another time. I bought Vista in 2006 and i cannot use it till you'll release a good sw.
    Have we to wait till 200 for a fuc.ing working driver
    My Hw.: Intel Core 2 Quad 6600, DFI Lanparty DK, 2GB DDR800 Team Group, X800XT 52MB, Enermax Noisetaker 600W, Creative X-Fi Elite Pro, Creative ProGamer G500, Plextor PX76SA, Logitech G5 and G5.

    The problem is now official: other customers have problems with some games (Pes 2008 and Crysis in particular). I'll show u the main italian hw. forum. There is a thread of more than 500 pages just about Creative X-Fi: http://www.hwupgrade.it/forum/showth...42043&page=550 I would like to know if u test drivers before sharing... because i don't know what you did in more than year.You should meditate, people... I paid more than 400 $ for an Elite Pro and after year and 4 month i cannot install Vista 64 too for audio issues with mp3-wave files and Pes 2008 or Vista 32 bit for problems with Pes 2008. This is my latest Creative product, you can trust.

  • How long can I record audio without stopping?

    Hi there! I wonder how long can I record audio nonstop with my iPod Touch and how good is the mic of the 4G? Thanks!!

    I believe its based on a max file size of 2gb.

  • Sharing an iMovie as an MP4 with MP3 audio

    I have an iMovie that is complete. I have uploaded a Quicktime movie to Google video. The video plays but no audio. They are telling me that they prefer MP4 with MP3 audio. If I go to share in iMovie, I choose "export" mode. This gives me the MP4 option, but no way to change the audio to mp3. Am I missing something?

    iMovie doesn't use (or create) .mp3 (MPEG-1 Layer 3) audio.
    From the Google video upload pages:
    Technical Requirements:
    We accept many popular formats, such as AVI, ASF, QuickTime, Windows Media and MPEG formats. For example, .avi, .asf, .mov, .wmv, .mpg, .mpeg, .mp4, .ra, .ram, and .mod are all acceptable file extensions. Please note that we currently do not accept Flash files. Specific video codecs we accept include H.264, H.263, MPEG 1/2/4 and motion JPEG.
    The video must contain recognizable video content (video container files that do not contain video will not be accepted).
    The frame rate should be above 12 frames per second.
    The bitrate must be above 260 Kbps.
    The video must be at least 10 seconds long.
    If you have a video in another format, we will do our best to interpret it.
    Quality Recommendations:
    If possible, we suggest uploading the original source file. However, we recommend the specifications below for maximum quality and reasonable file size:
    MPEG4 (mp3 or mp4 audio) at 2 mbps
    MPEG2 (mp3 or mp4 audio) at 5 mbps
    30 frames per second
    640x480 resolution
    4:3 frame
    de-interlace
    MPEG-4 Video and AAC audio codecs in a .mov container should work just fine.

Maybe you are looking for