I recorded 1 hour and 6 minutes of footage on my Kodak Zi8 Camera in WVGA mode. When I connect it to my Macbook Pro, the .MOV file that it creates is only 59 mintues. I can still view the full footage on the camera itself. I just can't export it. HELP!!!!

i recorded 1 hour and 6 minutes of footage on my Kodak Zi8 Camera in WVGA mode. When I connect it to my Macbook Pro, the .MOV file that it creates is only 59 mintues. I can still view the full footage on the camera itself. I just can't export it. HELP!!!!

So it is cutting off the end at 59 minutes? How large is the file that is being exported? You may be running up against a file size limitation.

Similar Messages

Can't have sound on my TV when I connect it on my MacBook Pro 2011, with the HDMI adaptor

Can't have sound on my TV when I connect it on my MacBook Pro 2011, with the HDMI adaptor.
On SOUND preferences, I don't have the option for chosing HDMI on the OUTPUT sound.

Do you have another HDMI port that you can switch to on the TV? Is the tv source on the matching HDMI port with the volume up? After checking those try the following:
PRAM Reset: http://docs.info.apple.com/article.html?artnum=2238
SMC Reset: http://support.apple.com/kb/HT3964

I have a 3rd gen Ipod touch and when i connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I connect this older iPod to my iTunes?

I have a 3rd gen Ipod touch. When I connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I make this older iPod show up on my iTunes?

Hi ChristianHelpplz,
Thanks for visiting Apple Support Communities.
It seems like your iPod touch is not recognized by iTunes on your Mac, but your iPhone 6 is working normally.
I recommend starting with these steps to troubleshoot your iPod touch and connection with your Mac:
Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Restart your device
Restart your iOS device or reset your iPod.
Restart your Mac
Turn your Mac off and back on.
Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
From:
If you don't see your connected device in iTunes for Mac - Apple Support
If you've tried these steps and your iPod touch is still not recognized, try placing it into Recovery Mode next:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Sincerely,
Jeremy

I bought a Macbook Pro in August 2011, so it has been only 16 months up to now. However, its logic board is broken now. Can I ask 1) where can I buy this mainboard?, and 2) how much does it cost?. Thank you

I bought a Macbook Pro in August 2011, so it has been only 16 months up to now. However, its logic board is broken now. I want to ask 1) where can I buy this mainboard?, and 2) how much does it cost?. Thank you

This is one instance where you'll curse yourself for not having bought the AppleCare Warranty extension and gotten the board for free.
Anyway, get your model number handy and go look up the parts in www.powerbookmedic.com or www.ifixit.com amongst other places. They've also have videos or photo pictorials on how to do the replacement. Not altogether trivial, be sure to spread the adequate amount of thermal paste on the CPU and GPU, else you'll fry the new board in short order again.

I just bought a new external monitor (ASUS), and I have DVI adapter plug. When I connect it with my Macbook pro - the monitor remain black (even tho it is 'on')

I just bought a new external monitor (ASUS), and it have DVI and VGA plugs. I bought the DVI adapter to connect with my macbook pro laptop. But the external monitor remain black… so I turn it off then turn it back on, it said "No VGA signal". Does it means I have to use VGA adapter instead? I am not sure how it work, I am very new to it… I hope you can help me out!
Thanks!

Use the Transfer Purchases command in the File menu of iTunes.
(60931)

Is the prores file that FCPx creates when importing c300 .mxf files stable/quality enough to then copy to other drives for further use? Are there any quality disadvantages to doing that?

Im wondering if I can directly copy the prores files fcpx creates when importing c300 .mxf files from the "original media" folder, reimport them for another project to and use them that way. Is there any problem with working that way? I'm doing this bc I want to have an organize finder structure for a client but cant break the c300 card structure to split clips on a card into different "scenes" to make it easier for them to understand what they're looking at. This is all to stay NLE nuetral--we like fcpx but they might want to edit somewhere else and more details in the finder level seems like the best solution? Suggestions on any of that? Thanks.

Thanks for your response. Are you sure that FCPx is working with .mxf/c300 natively? I thought it was just a background sort of repackaging or transcode into prores that it does without you having a choice? And bc of that, for me, it's sort of a "back end" feeling file: I'm curious if it's bad to get into the package contents folder to copy it over? Not about copying prores in general-- specifically, is the prores created of c300 footage in fcpx more of a fcpx, high quality alias file? Maybe I'm just feeling a little uncomfortable grabbing things from the inside/finder level of fcpx.

Macbook Pro 2011 boots to Recovery disc or bootcamp only after successfully installing bootcamp on Mt Lion 10.8, the 3 harddiscs are there, but selectin Mac HD will boot to recovery disc

On my Macbook Pro 13.3" mid 2011 model, with Lion and bootcamp, upgrading to Mountain lion 10.8 hung for the whole night. It failed to boot up, I was panic, reinstall the OS in the hope it will repair the boot disc, but it locked up the macintosh HD.
I rebuilt OS without bootcamp from backed up image (Lion) then upgraded to Mountain lion, no problem at all. Used it for a couple of days, then installed bootcamp and restored the Windows 7 image from the backup. It's completed without any problem. It can boot up in Windows 7 and I changed startup disc in control panel to Mac HD, it can only boot from the recovery disc. Holding down the option key will show the 3 hard discs: Macintosh HD, Windows and Recovery 10.8, but selecting Mac HD always boots up by recovery disc. I have use disk utility from recovery disc to verify and repair Macintosh HD to no avail.
If I use only mountain lion, it will be OK.
Has anyone experience the same problem? Thank you.

http://www.youtube.com/watch?v=QaDMbmsRqkQ

Where does xcode 5 save the executable files that it creates?

I already built my console application, and I can run it from xCode as well. Now I'd like to find the executable file it generates. I saw in an old tip in this forum that it's just to right-click the corresponding product item and select Show in Finder in the menu. However that option is disabled, as you can see in the picture below.
I also tryied the bin\release\debug and it's not there as well.
What am I doing wrong?
Tks in advance,
Mauro Assis

I checked the Locations and they're default, as you can see below:
Am I correct?
Opening the default path in Finder:
Do you think it should be here? Where?
Tks again,
Mauro

Hi, I am using macbook pro 2009 model.In that, there is wifi hardware is not installed. I am not able to use wireless networks. Anybody can help me out.

Hello,
I am using Macbook pro 2009 model. In that, when I tried to connect wireless network and wifi. I am not able to do. I have done R & D regarding this issue. Some them advice to do some below steps.
Restart your Mac.
upon start-up, hold down the Opt key until you see your drives.
click on the recovery drive (note: this will not affect or delete any files you currently have).
login if needed.
in the top right hand corner you will see the Wi-Fi icon (hopefully). Click the icon and then click "turn wifi Off" and then again click "turn wifi ON"
restart your Mac again and start it up normally.
recover from your near-heart attack.
I've followed your 1 to 4 steps & then after clicking on the wifi icon, I found Wi-Fi: No hardware installed just beneath the icon. That means no Wifi hardware is installed in this machine. Do you have any suggestion about installing it? I mean how can I get that hardware? Is it available on internet? Thanks a lot again.

Apparently you have tried everything except - take the monitor in question to the Apple Store along with your computer. If it works there, the mystery continues.

DVD: can I extract the movie files?

DVD: can I extract the movie files?
I created a DVD (burned on DVD media). I did not archive the project since the files are too large. Can I extract the movie files from the DVD? I want to make a edit to the DVD.
I know if I have the movies (clips) in iMovie I can do it but how do I do it from a completed DVD that I created and dont have the assets?
I really don't want to pay for software that I will use once. Low or No cost alternative that won't sacrifice file quality? Thanks! Steve
Message was edited by: Steve Woron

As far as set up goes, others on this forum feel free to add. I rarely use either of the above (although I have access to them on separate power macs).
Reason: Apple's DVDSP works natively with Mpeg-2. I personally have no need for anything else since these features are already included in apple's pro apps.
Q: Doesnt DVDxdv watermark the demo version?
A: Yes. It does, until you pay for it in full.
========================================
Q:what is QT playback component??
A:The QuickTime MPEG-2 Playback Component provides QuickTime users with the ability to import and play back MPEG-2 content, including both multiplexed (a.k.a. muxed, where the audio and video tracks are interleaved into one track) and nonmultiplexed (a.k.a. elementary) streams.
You can read the description here:
http://www.apple.com/quicktime/extending/components.html
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

Determining what the .MOV file settings are.

I have a program on my iMac I run to create slideshows and it creates .MOV files. I then transfer these .MOV files up to my website so people can see the slideshows.
On a older version of the program I use, when I look at the .MOV files on my iMAC (through the website) the video starts playing immediately and the download bar slowly fills up.
On the new version of the program I use, the .MOV file doesn't start playing on my iMAC until the file is completely downloaded.
I looked at the settings (to the best of my ability) with QuickTime Pro, and don't see anything obvious that is different. THe file created with the new version of the software is about 300K larger.
I am assuming there is a flag or something different between the two files. Is there any utility I can use which will take a .MOV file and list out the QuickTime settings for it?
Thanks,
Dennis

For some more information.....I am using Boinx softwares Fotomagico product. I placed both versions of the file created here: http://www.longnecker.me
For the .MOV file that was created with version 2.6.2 the show starts playing immediately.
For the .MOV file that was created with version 3.0.4, the show takes awhile before playing.
The difference is even more when the file is larger. The website, and the embed code is the same. THe only difference is the version of the Fotomagico software.
Any thoughts on why/how the file is different?

How can I view my full billing history for the app and music stores without iTunes installed?

I just received an email receipt from Paypal showing a $12.99 purchase from iTunes. I almost NEVER purchase anything over around five dollars in the app or music store. Since PayPal does not show what this purchase was for, I have not received the receipt from Apple yet, and I cannot find anyway to look up online what this purchase was for....I need help to find out ASAP what this purchase was. If my account has been compromised or if I have been incorrectly charged for something, I would like to get the issue handled immediately. I do not want to install iTunes on my PC (nor should I have to for Pete's sake), but I cannot see anything recent at all in my app or music history on my iPad (not that I would ever purchase anything for $12.99 anyway...I just don't). Thanks in advance for any tips!

How can I view my full billing history for the app and music stores without iTunes installed?
No.
If my account has been compromised
If you even think this may have happened, immediately change your password.
See this -> Apple ID: Changing your password

My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

TS1538 I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

Again without stating the trouble shooting steps you have taken, its hard to direct you with any information.
Try a different port on the computer.
Does the iphone beep when u plug it up. ?
Plug iphone into computer and give it 3 to 4 minutes to see if it connects and is running slow.,
Delete the apple mobile device from your computer.
Upgrade itunes to newest version.
Is you USB cord defective ?
Any USB 3.0 on your system ? .
Delete or Disable any antivirus program on your computer ?
I will tell u the problem is your computer not the phone.
We could do this for hours.

I recently downloaded the 5.1.1 and all of a sudden the contact icon has disappeared. I can still access my contact list through the phone icon, but I want the contact icon back. How can I reinstall it?

I recently downloaded the 5.1.1 and all of a sudden the contact icon has disappeared. I can still access my contact list through the phone icon, but I want the contact icon back. How can I reinstall it?

You can't delete it. Look on all your screens and inside all your folders. If you still can't find it go to Settings>General>Reset>Reset Home Screen Layout. This will restore the home screen to its original configuration but may move other apps around to do so.

I recorded 1 hour and 6 minutes of footage on my Kodak Zi8 Camera in WVGA mode. When I connect it to my Macbook Pro, the .MOV file that it creates is only 59 mintues. I can still view the full footage on the camera itself. I just can't export it. HELP!!!!

Similar Messages

Maybe you are looking for