I recorded 24 bit audio. need to change settings to 24 bitrate

I recorded 24 bit and it sounds terrible. I'm assuming I need to change the bitrate to 24 in FCP. How do I do that. Footage is from
Red One Camera but I'm not importing footage yet. I'm just checking the sound files and they sound terrible.

There is a lot of noise. I did another test and changed it back to 16 bit and it was fine. I played it in Quick time and it did the same thing. I was told I need to change my settings in fcp to 24

Similar Messages

I'm using a TravelSIM to make calls home to Australia on my iPhone 4S while I'm overseas. Do I need to change settings, or do anything else, to make sure I don't pay too much? eg turn off push data - what else?

I'm using a TravelSIM to make calls and texts home to Australia on my iPhone 4S while I'm overseas. Do I need to change settings, or do anything else, to make sure I don't pay too much?
I have advice to turn off push data and don't use Google maps
Are there other things I should do so my costs will be kept low?
thanks for any answers from experienced iPhone using travellers!
kind regards, Di

It's not entirely impossible actually as someone has pointed out to me that I can turn on Call Forwarding and that stops any incoming calls. I've just forwarded it to my google voice number and then turned on "do not disturb" in google voice and whenever I get a call it goes straight to my google voice voicemail and my phone does nothing. The only thing now is I still get text messages but I think the phone calls bugged me more because they would make my music turn off for much longer.
Even though this isn't a perfect solution it's something so far so maybe you shouldn't just come out and say there's NOTHING I can do because so far I've found part of a solution. If you don't have anyting productive to say then just don't reply and close the tab. Thanks.
At this point I'm wondering if anyone knows of any Jailbreak tweaks that can enable what I want. Unless of course it's agaisnt the rules of this forum to mention jailbreak stuff...

I am not getting software alerts on my iPad 2 - why? Do I need to change settings and where can I find and how do I download ios5

I am not getting software alerts on my iPad 2 - why? Do I need to change my settings. Where do I find the latest iOS software and how do I install. Thanks!

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Need to change settings on my icloud mail account

need help to change settings on my mail icloud account. is grayed out.

jplman wrote:
using 1-.8.4.
I assume that you mean 10.8.4?
Here are the current settings for Comcast email (please note recent change)
To prevent spam and to ensure the security of our network and customers, Comcast no longer supports the use of port 25 for sending email. If you use an older email client (Outlook Express, Outlook, Mac Mail, etc.), this may impact your ability to send email. To learn more about port 25, please visit our FAQ.
To configure an email client to use Comcast email (@comcast.net), the following settings should be used for sending and receiving email:
Recommended
Only If Needed
Incoming Mail Server - Name
mail.comcast.net
mail.comcast.net
Incoming Mail Server - Port Number
995 (POP3)
110 (POP3)
Outgoing Mail Server - Name
smtp.comcast.net
smtp.comcast.net
Outgoing Mail Server - Port Number
465 (SMTP)
587 (SMTP)
SSL Encryption
checked
unchecked
Authentication
Comcast ID and Password required

I need to change settings from pop to imap

I need to sync my email act. to be compatible with my iphone and ipad they are imap and my current thunderbird settings is pop. can this be changed and how do I do it

''moving to the Thunderbird questions queue''

I cannot run slideshow feature in some albums. Do I need to change settings?

I am using Iphoto. Some albums I am able to view photos with the slide show feature whereas others run in reverse or not at all. Can someone please help

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

I am having trouble connecting to my wireless internet. I keep getting message that my network configuration settings have changed. Ive been advised that i need to change settings to look for dynamic ip address ?

I am having trouble connecting to my wireless internet and am getting the message that my network configuration settings have changed. I have reported it to my provider who advised that they think the Mac is looking for a fixed IP address and they use dynamic addresses. I have had the Mac for months and have not had this problem before. I would appreciate any help please on how to fix this ?

Then I get a separate pop up that says: Secure Connection Failed. aus3.mozilla:443 uses an invalid security certificate.
The certificate is only valid for the following names: securelogin.arubanetworks.com, www.securelogin.arubanetworks.com
(Error code: ssl_error_cert_domain)
This could be a problem with the server's configuration or it could be someone trying to impersonate the server.
If you have connected to this server successfully in the past the error may be temporary and you can try again later.
I have tried many many times!

Cant receive sms, need to change settings

Hi,
I have received a Firefox Os phone from geeksphone. Seems pretty good, but it freaked me out today. I realized that I am unable to receive sms. I cant even receive from myself, or gmail(2-step authentication). I have never experienced such problems with othe devices from this office.
I need to check the sms settings on the phone but cant find them. Can you help me please or provide any hints?
Thanks.

Hello, [[Control cellular and data connections and settings on Firefox OS]] should help you with this :)

I need help changing settings (port forward?) after a physical server move

Hi! I have a 10.6 server that I use at home. All is well and good there. The Airport Extreme assigns IP addresses for the network. I have www.mydomain.com that runs on the server -- I use it for testing web apps, etc. I use DynDNS with their client app that send the Comcast dynamic IP address back to DynDNS to keep the server on the grid.
My friend has a 10.6 server. He has www.hisdomain.com as a home business. He also uses DynDNS in a similar way. His landlord just informed him that his apartment is going to be sold from underneath him and he has to move ASAP. It looks like he won't have a permanent place for a month or two, so I offered to let him keep his server at my place.
We both run websites on port 443 and port 80.
After attaching his server to my network, his domain name updates, but typing www.hisdomain.com into a browser lands me on www.mydomain.com. I guess that the problem is port forwarding... the router sends all 443 and 80 requests to my server.
How do I configure this so that services for hisdomain.com are forwarded to his server while services for mydomain.com are forwarded to my server?

Short answer: you can't, although there are a couple of ways to sort-of kluge it.
Long answer: When your router gets an incoming connection, the only thing it has to go on is the IP address and port number (the domain name is sent much later, after TCP session with the server is established). So unless you have multiple public IP addresses (and a router that can handle them), or want to put the sites on different ports...
Speaking of which, here's kluge #1: run his server on different ports (e.g. 81 and 444, or maybe 8080 and 8043) and set the router to forward them to his server. Problem: the user has to include the port number in the URL when they connect, or they'll get your server.
Partial solution (and kluge #2): add a virtual site on your server, with the hostname www.hisdomain.com, go to its Aliases section, and add a rule in the URL Aliases & Redirects section, with these settings:
Type: RedirectMatch
Pattern: (.*)$
Path: http://www.hisdomain.com:81$1
Then build an SSL version that redirects to https://www.hisdomain.com:444$1. Problem: when the client connects, they'll get your SSL certificate instead of his (again, it happens before the client sends the domain name it's trying to reach), and get a cert error. No fix for this.
Kluge #3: instead of making the virtual site redirect clients to his server, add a reverse proxy so your server'll transparently forward requests to his server, and proxy the replies. I haven't done this, but I think what you need to do is make a virtual site (as above), and under its Proxy tab (the one under the virtual site, not the one under the Settings section), check the Enable Reverse Proxy box, leave the Proxy Path as "/" and the Sticky Session Identifier field blank, and add a Balancer member with the Server URL "http://hisinternalipaddress" and a blank Route. Or something like that. Again, you could do the same for https as well, but you'll have the same certificate problem.

No internt need 2 change settings from contract web 2 pay as u go

hi there iv just bought the blackberry curve 5200 and its seconed hand i think the phone was on contract before as iv put me contract sim in and all internet works aok but the problem is i need 2 get it working on pay as u goon o2 network iv done the diagnostic test in netwark settings and it says radio activation no signal level unknown network unknown ip address unknown icmp ping echo no blackberry registration no connected to blackberry no blackberry pin no i just cant work out what 2 do can u help me please thanks jason

Wow, long sentance there jason pretty hard to keep up with the thought process with no puncuation at all anywhere throughout there is no model device 5200 is the device unlocked who is it branded to do you have the blackberry data plan and if you do has it been provisioned to your account with o2 these are things you need to answer oh yea was the device fomerally used on a bes corporate network with an it policy on the device
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Everything won't fit on the disk...do I need to change settings?

Hey,
I am working on a project that I edited in FCP 5.0 that is approx. 2 hrs long. I would like that video plus a 40 picture slideshow and a scene selection on a DVD. I have done this before and it has fit on a single non dual layer disk.
When exporting from FCP I use "Quicktime Conversion". Should I use "Quicktime Movie"?
I would like it to be fairly high quality like the last time I did this without using a DL disk.
Thanks for the help,
Chase

Hello DJChase,
first off, the maximum amount of video (incl. slideshow and DVD menu) for an SL DVD is two hours, so wether you will be able to fit in everything will depend on the overall length of everything.
When exporting from FCP you should generally export as QT movie and not use the QT Conversion option, as this usually degrades the video somewhat (even if the export settings match the sequence settings).
Question here: if you're using FCP, why don't you create the DVD using DVDSP/Compressor? The output quality will surely surpass that of iDVD.
hope this helps
mish

24-bit audio recording in iPad?

A couple of hardware manufacturers claim it's possible to record 24-bit audio via USB/CCK on the iPad in the latest IOS update (Apogee and Lexicon) into apps like Garageband. Has anyone tested this?

Just an addition. I get this error message whenever I try to play one of these captured clips.
"Additional software is required for QuickTime to playback this media. It may be available from the QuickTime Components page."
I'm not sure what component might be missing as it's supposed to be 24 bit uncompressed audio and not some third party codec.

I'm having trouble backing up my second macbook to a new time capsule. continue to get an error message -- "Time Machine Error. The backup disk image could not be created." Is there something I need to change in my time capsule or time machine?

I just set up a new time capsule. it worked fine on my first macbook. But now I cannot backup my second macbook. Getting "Time Machine Error" "The backup disk image could not be created." Do I need to change settings on my time capsule to allow the second computer, or do I need to change something on the computer to allow time machine to work right?

Try #C9 in Pondini's Time Machine Troublshooting
http://pondini.org/TM/Troubleshooting.html

I can not get real audio player to record videos from the internet, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

dont know what to do

I have downloaded the 32 bit version of photoshop elements, when i needed the 64 bit, how can I change this?

I have downloaded the 32 bit version of photoshop elements, when i needed the 64 bit, how can I change this?

Emmag74878818 what version of Photoshop Elements are you trying to download? Where did you download the 32-bit version from?

I recorded 24 bit audio. need to change settings to 24 bitrate

Similar Messages

Maybe you are looking for