I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed

I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed them in the past.  How can I get it to display these photos in Bridge and open them in RAW?

Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
Benjamin

Similar Messages

  • Wave Studio says "device doesn't support this format"

    ?Wave Studio says "device doesn't support this format"'I have a X-Fi Extreme Music card I'm using in Windows 7 (x64). I haven't had any issues with the card or the software until I installed a codec pack: Shark Windows 7 Codec pack. It worked OK, but when I try to play a WAV file in Creative Wave Studio (7), I get an error message: Sorry, your audio device doesn't support this format". Weird, since Wave Studio's "nati've" format is WAVs!!
    So I uninstalled Shark, uninstalled Wave Studio, and uninstalled (from Device Manager) my sound card. Rebooted, then reinstalled the driver for the sound card, rebooted and reinstalled Wave Studio. I still get the error message and can't play WAVs in Wave Studio. The version is 7.2, and the driver is 6.0..375 (5/5/200). Anyone have any ideas?
    Thanks,
    Laner

    CThe point is moot now, I've gotten a new computer and installed the card in that machine. Everything works great now. I would imagine there was a registry issue that didn't get cleaned, or something similar. Still, it would have been nice to resolve the problem, as someone else might experience the same issue and could find a way to help get it taken care of.
    Cheers,
    Laner

  • HT201210 My phone turned off and will not turn back on. Nor will it charge.

    My phone turned off and will not turn back on. Nor will it charge.

    So bring the phone to Apple.  Not much we users here can do for you.

  • TS4062 For some reason my Ipod will not connect to Itunes store nor will it sync.whats up with this?

    For some reason my IPOD touch will not connect with the Itunes store nor will it sync with my PC. Whats up with this?

    How To Fix 0×80090318 and related errors – Windows 7, XP & Vista
    Also Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • I am downloading illustrator, during installing, I was asked to close the adobe bridge.  I have no clue as how to close it?

    I am installing the try version of illustrator, I was asked to close the adobe bridge before the installation can be completed.  I have no clue as how to close it

    Error "Installation cannot continue until... Adobe Bridge is closed" | Installation | CS5

  • I have cs5 and when I try to download a raw file from my Nikon 810 an error message says this versioln of raw doesn't support this camera model. Yet I just updated cs5 online.

    I have CS5 and when I try to download a raw file from my Nikon 810 I get an error message saying this version of raw doesn't support this camera model. Yet I just updated CS5 online.

    I do not use lightroom and  I have a subscription so I can open all supported RAW formats. You will need DNG file for Your Camera's NEF files for use in Photoshop ACR version.  You can open your NEF files in LR it seems so you could do all your raw conversion with Lightroom and save out Tiff files for processing in Photoshop.   I do use lightroom for I do not need its library.  Lightroom does not support layered files so lightroom is of no value to me.  ACR UI is all I need having a second interface to Adobe Raw Conversion Engine would more annoyance than value to me.

  • I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

    i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

    You'll need to update to at least ACR 8.2 for the 70D to be recognized.  The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
    According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
    Are you using PSE 11 and not 12?  PSE 11's maximum ACR version is 8.0.

  • I have Photoshop CS5 and am trying to download the Camera Raw plug in which will enable me to look at RAW images from a Nikon D800 . The download appears in my " Downloads " folder but when I try to open a RAW image I get a message up which says it can't

    I have Photoshop CS5 and am trying to download the Camera Raw Plug in that will allow me to open images taken with a D800 camera .
    It appears the download has been successful when I look in my " Downloads " Folder but I still get a message up saying the installed version of Camera RAW won't support the Camera model ( i.e. D800 ) . What am I missing ??
    Tony Fletcher

    You need to download and install Camera Raw 6.7.1 for CS5. Once you have downloaded it, you need to install it while CS5 is closed.
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
    Once downloaded, unzip/unpack the file, and run the executable to start the update, following the instructions.

  • My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images

    Any ideas?

    My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images from Lightroom and choosing the "Render using Lightroom option when it popped up in the dialogue box. She has been doing this for over a year and a half without any problem. Today when she hit Command E no dialogue box appeared and the image just opened in Photoshop. I'm concerned that all of her Lightroom edits are not being rendered to Photoshop. Anyone have an idea as to how we can get the "Render using Lightroom" dialogue back?

  • I have Photoshop CS5 and a Nikon D 810 camera.  I have downloaded Camera Raw 8.8 & DNG converter.  I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong?

    I have Photoshop CS5 and a Nikon D 810 camera.  I have downloaded Camera Raw 8.8 & DNG converter.  I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong?  Thanks!

    This is the last paragraph from my very first response to you, post #1 in this thread:
    …Additionally, you need to install the DNG Converter, not just "download" it, and you need to launch it and run it on each folder of NEFs you wish to convert to raw DNGs.  [emphasis added]

  • Cannot open camera RAW images from Sony DSC-RX100M3 camera.  Working on a Mac in Photoshop CS5 and have camera raw 6.7.

    Cannot open camera RAW images from Sony DSC-RX100M3 camera.  Working on a Mac with Photoshop CS5 and Camera Raw 6.7?

    Bruce,
    When I made the transition to digital some 8 years ago, I had tremendous help from a number of well documented websites, among which:
    http://www.luminous-landscape.com
    I think a lot of stuff there to get you seriously going. Another one is:
    http://www.computer-darkroom.com
    I sold all my film based stuff, except a Nikon F3 and a handful of lenses and a Paterson developing tank.
    The Nikon suspiciously smells like foam mirror damping strips chemically decaying.
    I sold my enlarger over the internet. The word "enlarger" caused me to be on SpamCops blacklist for a while.
    I'm in this since the seventies, and I think you'll be as amazed as I was at the possibilities and control you have. And no more bags with $300 worth of film that's consumed in one shoot.
    Jump in both feet! you won't be sorry. And these forums are the best help you can get.
    Good luck,
    Rob

  • I have airport extreme and just purchased a D-Link DCS-932L home network camera.  D-Link says I need UpNp but the extreme doesn't support this.  Can I use port mapping?  if so anyone know how to set that up?  thanks

    I have airport extreme and just purchased a D-Link DCS-932L home network camera.  D-Link says I need UpNp but the extreme doesn't support this.  Can I use port mapping?  if so anyone know how to set that up?  thanks

    Since the D-Link DCS-932L is accessible on the local network via a web browser, you should be able to access this camera from the Internet if your router has a publically accessible Public IP address. If your ISP provides you with a dynamic Public IP address, you may want to use a DDNS service to make it easier for you to locate your camera whenever your ISP changes your IP address.
    Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn).
    Select Manual Setup.
    Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
    Select Advanced, and then, select the Port Mapping tab.
    Click the plus sign to add a new port mapping.
    For Service, leave the default; this will change to "Custom" once you start entering port values.
    In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your camera. In the Private UDP Port(s) and Private TCP Port(s) boxes, enter the appropriate port values that should have been provided to you by the camera manufacturer. Click Continue.
    In the Description box, type a descriptive name like "Internet Camera Access," and then, click Done.
    Click on Update.
    To connect to the shared Camera from a remote location using a Mac or PC:
    Start your favorite web browser.
    Enter either your Public IP address or DDNS-provided Domain Name, followed by a colon and the Public port number that you choose in step 7 of the previous procedure. For example: http://123.123.123.123:8888 or http://www.mydtdnsdomainname.com:8888

  • I have Photoshop CS5, and use windows XP.  I cannot open Bridge from photoshop, whichI have done for years. When I am in Photoshop,when it opens, I always click on the bridge icon at the bottom of the screen, and it puts me into bridge. This is not happen

    I have Photoshop CS5, and use windows XP. I cannot open bridge from photoshop, which I have done for years.  When I am in Photoshop, when it opens, I always click on the bridge icon at the bottom of the screen and it puts me into bridge. This is not happening, the small wheel at the bottom of the screen just keeps spinning. Its like its stuck or caught in a loop. I can't get into bridge. I tried shutting down and starting up again but  the problem remains. Looking for help.  Dan

    Thanks for your response, I was able to open bridge from File-Browse in Bridge.  This worked, but was not able to go back to the way I always opened Bridge.  At least I could get to Bridge and go into Camera Raw. I never tried to open Bridge from the Start menu.  The odd thing about this is, it has happened before, and to get it "unstuck" and working again, I would shut down and restart again in a few minutes, and things would go back to normal.  This time it did not go back to normal after several attempts.  I shut down for about 3-4 hours, restarted, and it seems to be back to normal again. I am not sure if it's a problem that is getting worse each time it happens.       And yes I am using Mini Bridge in photoshop CS5.  Thank you for your help.  Dan

  • Raw images in Photoshop CS5 and download of 7.3 plug-in

    I am unable to open my Raw images from a Nikon D600 using CS 5. Also unable to download the 7.3 raw plug-in. Help wou;l be greatly appreciated. Thanks

    Thanks, i will upgrade to CS6, make life easier!
    Date: Wed, 5 Dec 2012 11:33:29 -0700
    From: [email protected]
    To: [email protected]
    Subject: Raw images in Photoshop CS5 and download of 7.3 plug-in
        Re: Raw images in Photoshop CS5 and download of 7.3 plug-in
        created by John Waller in Downloading, Installing, Setting Up - View the full discussion
    Camera Raw 7+ is only compatible with Photoshop CS6+ CS5's compatibility stopped with Raw 6.7 http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applic ations.html If you don't upgrade Photoshop, your next best option is to convert your D600 Raw files to DNG and work on the DNGshttp://www.adobe.com/products/photoshop/extend.displayTab2.htmlhttp://www.adobe.com/suppor t/downloads/detail.jsp?ftpID=5486
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4898876#4898876
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4898876#4898876
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4898876#4898876. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. How do I get and install the right version of Camera Raw?

    Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. I was told to update Camera Raw to at least 7.2. I tried to download this but got a DNG Converter instead. Where is Camera Raw? (it does not show up in a search of my hard drive. There is a folder of camera profiles but no extension or plug-in with this name). How do I find out what version I have already? How do I get the correct version?  . . . OR . . . is it the case that Bridge will never open Sony raw files directly and I will have to do a separate conversion process every time I want to use a raw file??. Can someone explain this?
    Thanks.

    A Good samaritan answered this for me on another forum
    How to update Camera Raw

Maybe you are looking for

  • How do I find the music I bought by date?

    I've bought a lot of music over the last couple of years and I can lose track of what I purchased. I know I can view my pruchased music under "purchased" in iTunes, but is there a way to sort the music by date purchased, by any chance?

  • Adobe InDesign 5 won't print Adobe PDF (Acrobat Pro 9) completely.

    I just bought a new Dell XPS 14 with Windows 7 Professional 64-bit. I installed my CS Standard 5.0 and amongst a few other bugs with InDesign, I cannot print documents as PDFs. Only the first few pages will print. I looked for an update and can't fin

  • Problem in Starting 2950

    When i start to configured our Cisco 2950 Switch through Consol Cable , is display me this message and rebot again, File "flash:/c2950-i6q4l2-mz.121-22.EA6.bin" uncompressed and installed, entry p oint: 0x80010000 executing... Error: hardware not sup

  • Sync with BB Link and Pictures/Video

    When syncing media from my Z10 everything is fine, I have a copy on my phone and PC. Under sync settings, there is a note under Files that any new files creates on the phone will sync to the PC automatically. It also states that any changes made to t

  • Wireless router to feed a cat5 network?

    Hello, I am trying to create a network. My internet is fed from a cable modem and into a new ASUS 68R wireless router.  I have a cat5 cable network in my business located in a building 100' from my home. In the business I want to connect a Mac Mini,