I refuse to buy nokia phone with less than 1500 mA...

I realized this after latest addition of E52 with 1500 mAh battery So far, i have purchased about 30 or so Nokia handsets during past 14 years.
The battery Life of E52 is just marvelous. simply amazing. Cant imaging how I survived 14 years exclusively using Nokia phones with less than 1500 mAh battery.
The new touch screen phones like the latest N-800 with HDMI Port has only 1200 mAh battery!!! why not put a 2100 mAh battery on such a beauty? people are going to use the phones more than just making call, this demands more battery power. 1200 mAh battery will last less than a day.... People, expecially myself will be dissapointed in using such a phone with so less battery power.
Granted these days processors are more efficient, but wont it be good if Nokia puts little more juice to their most beautiful touchscreen handsets?
Having less battery power is the main reason i have been holding off my purchase of touch screen phones like N900, and now this N-8.
Please Nokia, please try to put the best in it's class battery for the best in it's class phones.
Even the iPhone 4G has (1200 mAH) less capacity battery than my E52.
My E52 goes on and on for weeks together without charging. On heavy usage it easily lasts for 1 full week!... (never been like this for any of the previous nokia phones...) especially the top of the end models like my old N82
So far, I am very happy with my E52. Wish some thing similar i.e. slim E series comes with touch screen soon.

Hello kmschmehl-
I cannot truly express how sorry I am to hear about your total experience with the delivery and subsequent return of this fridge.  It certainly sounds as though Best Buy has put you through the ringer and I can absolutely understand your disappointment and anger with us.
While it sounds like some aspects of the purchase and delivery were at least adequate, any opportunity that we had to show you why you should purchase from Best Buy went by the wayside.  However, Best Buy is not in the business to provide merely adequate experiences and I am saddened that this is the best we could summon for your purchase.  We are capable of better than what we showed you.
I’m glad to hear that you have finally been able to get the assistance you needed to get this refund resolved and make you whole again.  In addition, I do hope that you are enjoying the fridge you purchased at Lowe’s.  I certainly wish that it had been a Best Buy fridge in your kitchen instead, but I can understand why you chose to go with another retailer.
It sounds like the store has you in good hands once your card arrives and I believe that the reason they need the physical card is that the credit card company requires it to be physically scanned for returns.  Hopefully you will not run into any further issues with this refund and it’s my hope that sometime in the future, you might grant us another chance at your business.  I will be sending you a Private Message with some additional details as well.  To check your Private Messages, please log into the forum and click on the envelope in the upper right hand corner.
Please let us know if you run into any further concerns.
Sincerely,
Bill|Senior Social Media Specialist | Best Buy® Corporate
 Private Message

Similar Messages

  • HAS ANYONE EVERY HEARD OF A UPGRADED PHONE WITH LESS PERKS !!!

    i RECENTLY PURCHASED (2) TWO DROID X2 PHONES FROM THE SOUTH BEND, INDIANA VERIZON STORE ON IRELAND RD. THERE SHOULD BE A NOTE THAT SAYS BUYER BEWARE WE ARE PAID ON COMMISSION AND TELL YOU THAT IT'S A BEAUTIFUL DAY EVEN IF IT WAS A RAINFALL OR BLIZZARD OUTSIDE AS LONG AS THEY GOT YOUR ATTENTION.  AFTER OVER 1-HOUR CHECKING OUT PHONES AND ASKING QUESTIONS I DECIDED I REALLY LIKED THE DROID X2 WITH ALL THE WHISTLES AND BELLS AND THE 4G NETWORK "THAT WAS BEING UPGRADED IN THIS AREA", AFTER SPENDING ALMOST $500.00 AND TICKLED PINK WITH WHAT I WAS TOLD ABOUT THIS FABULOUS PHONE, WELL GUESS WHAT,  FIRST WAS TOLD THAT IT WOULD SINC TO MY 08 FORD FUSION STEREO, "DONT WORK" YOU HAVE GOT TO HAVE A CERTAIN STEREO, SECOND, MY WONDERFUL 4G PHONE IS NOT A 4G PHONE AFTER-ALL IT IS A 3G PHONE !!! AND IT IS NOT GOING TO BE UPDATED TO 4G, WHO IN THEIR RIGHT MIND WOULD THINK THAT YOU WOULD SELL A NEWER VERSION OF PHONE WITH LESS PERKS, THE DROID X IS 4G BUT THE DROID X2 IS NOT !! DO THEY CARE THAT THE SALES REP MIS-LED YOU "no no no no" YOU HAVE THE PHONE THEY HAVE YOUR MONEY AND YOU ARE SCREWED FOR 2-YEARS MIND YOU THAT IS $126.00 A MONTH PER PHONE !! WOW, AND IT DON'T DO WHAT YOU WAS TOLD IT WOULD, GO TO THE MANAGER AND THEY CALL YOU A LIAR THAT THERE SALES REP WOULD NEVER SAY A 3G PHONE WAS 4G ~~ I GUESS SALES REPRESENTATIVES CAN NOT MIX-UP THEIR PHONES ON ACCIDENT OR ON PURPOSE, I WOULD SAY IT WAS A INNOCENT MISTAKE ON THE REPS PART, HOWEVER WHEN YOU ADDRESS IT WITH THE MANAGER THEY TELL YOU YOUR STUCK WITH THE PHONE BECAUSE IT WAS AFTER THE 14 DAYS RETURN POLICY ... WELL HELLO WHEN THEY SAY THEY ARE UPGRADING THE TOWERS YOU TEND TO BE A LITTLE LENIENT AND HOPE IT HAPPENS AS SOON AS THEY CAN, I WOULD RATHER WAIT A MONTH THEN TO SEE THEM RUSH AND SCREW IT UP ... BUT NO MORE ... THIS IS MY LAST CONTRACT WITH VERIZON IF I EVEN CONTINUE IT FOR THE TWO YEARS I AM THINKING ABOUT PAYING THE EARLY TERMINATION FEE'S WHICH BY THE WAY IS 325.00 PER LINE SO SUCKED OUT OF ANOTHER 650.00 BUT AT LEAST I WILL NOT BE PAYING 240 PLUS A MONTH FOR SOMETHING THAT IS NOT WHAT THEY SAID AND DOES NOT WORK FOR THE PURPOSE OF BUYING A 4G PHONE ~~ I HAVE ALWAYS HAD FAITH WITH VERIZON BECAUSE AT ONE TIME THEY CARED AND WAS THE BEST FROM NORTH, SOUTH , EAST AND WEST ~~~ NOT NO MORE ~~~ THEY ARE JUST LIKE THE REST REAL YOU IN GET YOU TO SIGN A CONTRACT AND FORGET ABOUT YOU UNTIL YOU DON'T PAY YOUR BILL !!!!! ANYONE ELSE EVER HAD THIS PROBLEM IF SO WOULD LOVE TO HEAR FROM YOU ... I PERSONALLY AM CONTACTING THE BBB AND LODGING A COMPLAINT AS IF THAT WILL DO ANY GOOD BUT AT LEAST I GET SATISFACTION OF KNOWING THEY ARE NOT WALKING AWAY FROM ME WITHOUT A MARK ON THEIR FACE, NOW I WANT TO SEE IF THEY EVEN HAVE ENOUGH GULL TO POST THIS SO WHERE OTHERS CAN SEE AND READ THIS !!!

    After spending so much time looking at phones, did you not notice that SOME phones have 4G on the description and others DID NOT? The X2 was one of the phones that DID NOT have 4G on the description. I would have taken that as a hint.
    Second, the Droid X is NOT a 4G phone. It is 3G just like the X2.
    YES, the X2 has the capability to sync to the radio in the Ford Fusion. NO, not all trim levels of the Ford Fusion. When you bought your car, you were aware that it came in different trim levels, didn't you? Did you think that ALL trim levels had the same features? Did the sales rep go out and see your car? If not, how could you possibly think that the sales rep knew what trim level you had?
    You say that it is possible the sales rep could have been accidentaly gotten the 4G phones mixed up when he said the X2 was 4G. Well after spending so much time looking at different phones, some of which I am sure WERE 4G phones, I would think it is ALSO possible YOU could have gotten the 4G phones mixed up.
    And to finish off, bad news about the ETF. It starts at $350, not $325 for you each of your phones. Good news, though, is that it drops $10 for each month of your service you complete.

  • What is your reason to wanna buy nokia n9 with mee...

    If we look at the hardware on nokia phone, and compare with other company, nokia is still waaay behind.
    So if nokia make window mobilephone, why should i buy it at all?
    Nokia drop meego is a big mistake.
    I buy it because meego looks like fresh, unique and user-friendly.
    What is your reason to wanna buy nokia n9 with meego?

    rather than the N9 i want an N950 and the Terminal is the main reason for me :-D
    people kinda get a bit confused over the term 'support' - support from Nokia only means software updates... in theory if they get it right, it won't need support but as with the N900, there probably will be a lot of community support.
    as long as there's a demand there will be people to make apps

  • HT4623 I recently updated my iPhone 5 to iOS 6.1 and lost all of my contacts.  My phone was less than 30 days old and I did not have an account with iCloud prior to the back-up.  Any way to restore my contacts or are they lost forever?

    I recently updated my iPhone 5 to iOS 6.1 and lost all of my contacts.  My phone was less than 30 days old and I did not have an account with iCloud prior to the back-up.  Any way to restore my contacts or are they lost forever?

    I have the exact same problem.  I did the update on my iPhone 5 yesterday, opted for the iCloud set up in the update and then it wiped my contacts.  They are not on my phone or in the cloud...

  • Cheapest Nokia Phone with the largest SMS storage ...

    Help!!! I'm looking for a cheap Nokia phone with a large SMS storage capacity.  My clients send their orders thru SMS so I need to keep them as long as possible so I need  a phone that has a large sms storage capacity at least 1000 sms.. please help

    i'm considering Nokia 2700... can it hold at least 2000 SMS?  im using Nokia 3120c before.. i have no problems with it bec it can store 2000+ msgs.  but just last week i lost my 3120c.  now i need a replacement phone pref with bigger sms capacity.  pls help

  • Any Nokia phones with Threaded Text messaging?

    I'm looking for a Nokia phone with threaded text messaging.
    Rather like the Palm Centro or Iphone:
    Anyone know of a basic model that can do it?
    I'm currently lusting after the Nokia 3720 Classic and would love if it could organise messages in a more useful way, and banish my thoughts of bulkier handsets. I've loved my Nokia 6030 for a few years but its disintergrating now. 

    s60 phones are usually the smartphone family the E and N series all run on s60. 
    6700 new navigator, the 6220c also runs on s60, 5800xm runs on the new gen for touch screens s60
    the lower modesl 1xxxxx,2xxxxx,3xxxx, 5xxxx,6xxx (the 6 family is divided and can either run on s40 or s60 depending on the phone) series usually run on s40 platform.  for every phone you can look up specs and it will tell you which platform or operating system the phone runs on 
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • Tutorial - Connecting an Nokia Phone with an iPaq ...

    This Tutorial is as a result of a post by qvodude on 13th January 2008.
    Tutorial – Connecting an Nokia Mobile Phone to an HP iPaq Pocket PC
    This tutorial has been done using a Nokia 6260 (S60 series 2) and an iPaq 5965 travel companion (windows mobile 5).
    Turn on the phone and then go to menu>connections>Bluetooth. When you open Bluetooth you are asked to give your phone a name. (I named mine Nokia 6260). Hit ok. Then highlight Bluetooth and select options>change and switch Bluetooth on. Then scroll down to My phones visibility >options > change > shown to all >ok. Your phone is now set up.
    Switch on the iPaq. Start > settings > iPaq Wireless and turn Bluetooth on. Then tap done. On the settings page tap on Bluetooth Manager. When you open Bluetooth Manager it gives you a welcome screen. Just follow the instructions. Luckily my phone is in the list so it was fairly simple. If your phone is not in the list then select Generic Dialer or generic generic. The ipaq will then search for devices in range. In my case it picked up my phone and my laptop. I then selected my phone and was asked if I wanted to pair the devices. I said yes accepted the code that was on the screen and then pressed next. A message then appeared on my phone asking if I wanted to pair with my iPaq. I entered the same code that was used on the iPaq and pressed ok. The ipaq then asked if I wanted to connect to the internet and I said no as I did not want to connect at this time.
    On my phone if I highlight Bluetooth and scroll right it shows Paired devices > Pocket PC 5965.
    I then tested the setup by tapping tools > connect on the iPaq. My phone then asked if I wanted to Accept connection request from pocket PC. I then selected yes and my Pocket PC showed that I was connected to my network (Optus).
    I trust that this helps you. If you have any further problems let me know. I will be going away next Thursday 22nd and will not be back until Wednesday 28th. Whilst I am away I will not be in a position to access these forums so if you could get back to me before then I would appreciate it.
    Regards
    Barry

    Hey Bazyeo, sorry im writing soooooo late. I just wonted to thank you for the post on "Connecting an Nokia Phone with an IPAQ..."
    Been really busy with job changes and all, as you know the States (US) is going thru a really bad job $hit, and I got dump... well I **bleep** one of the upper management guys off and was asked to resign. But oh well thats another post
    Adios mate!
    Message Edited by qvodude on 16-Jul-2009 05:08 PM

  • HT6154 If I buy the phone with AT&T contract then how would I pay the monthly instalments?

    If I buy the phone with AT&T contract then how would I pay the monthly instalments of $60 after paying $199 down payment?

    I mean that as I want to buy IPhone 5s with AT&T and in that i need to pay $ 199 initially and after that i need to be in contract for 2 years paying them the charges of $ 60 per month for their network usage. I want to know that how they would take the money from me every month??
    iPhone 5s, iOS 7

  • Migration stalled with "less than a minute remaining"

    This issue was discussed back in April, but no definitive solution was found.
    I installed Mountain Lion on an older MacBook Pro and all went well until I got to the Setup Assistant after restart. The migration of my files from a Time Machine backup stalled with "less than a minute remaining" while "transferring files to support applications". Apparently this is a known issue that affects older Macs upgrading from Snow Leopard. I have two questions about this:
    1. Can anyone suggest a fix or workaround for this problem? In the earlier thread, some people repeated the file transfer several times with exactly the same results. One person evidently had better luck when he started over and deselected everything but Users on the transfer options screen; but it obviously requires alot of extra work on the user's part to reinstall every application.
    2. What is the best way to abort the stalled transfer without risk of damaging the data on my Time Machine backup drive? Mountain Lion refused to install on my startup drive until I erased it, so my Time Machine backup is the only copy I have of my data. Since Setup Assistant is not frozen, I can hit command-Q and Setup Assistant offers to shut down; but is the data on my backup drive at risk if I shut down and start over?
    Thanks!

    Has your Migration Assistant actually crashed? I am restoring my computer from a hard drive failure and the following dialog has been displayed for the last 12 hours. I clicked on the App in the dock to see if it was displaying as crashed, it doesn't appear to be.
    I checked the "Get Info" on the Hard Drive Volume, and it is showing a very slow progression of used bytes. I suspect the transfer is still continuing, just very slow as I have so much data. I think it is a matter of quanity of files rather than "file size".
    Should be interesting to see in another day or so to see if it completes. :-)

  • Small office with less than 10 APs

    What is best way to handle or setup wireless connection for a small branch office with less than 10 APs?  Management doesn't want to spend any money to install a local WLC.  Those APs will communicate back to two WLC 5508 in Data Center.
    Should I use local switch or flexconnect?  Any one has experience about pro and con between those two methods.  Ping time between branch office and Data Center is less 60 ms.
    Thanks,

    What is the link bandwidth between those two site. If you have enough bandwidth then you can go for local mode deployment, but all CAPWAP traffic has to come Data Centre WLC (ie central switching)
    If you would like to terminate branch traffic at branch switch, then FlexConnect local switching is the way to go.
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Encoding issue with " " Less than sign

    Hello Experts,
       I am working on Receiver Webservice scenario where I am facing issue with "<" less than sign. SAP XI system automatically replace it with "&#60;" sign. I can see the changed value in Audit log of communication channel.
    Web service is not able to accept the data and I can see error message in audit log
    SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAPEXCEPTION - soap fault: Server was unable to read request. ---> There is an error in XML document (1, 573). ---> The specified node cannot be inserted as the valid child of this node, because the specified node is the wrong type._
    When I check the payload in audit log I can see the XML structure properly but as I open it in Notepad I can see character code "&#60;" instead of  u201Cless than <u201D symbol.
    Audit log XML file is as given below
    <?xml version="1.0" encoding="utf-8" ?>
    - <ns1:TurnaroundDetail xmlns:ns1="http://isotrak.com/webservices">
      <ns1:sessionid>3f2f2592-39d5-456e-8cf2-5d7ee81402c8</ns1:sessionid>
      <ns1:data><Request xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><TurnaroundDetail><PlannedJobDepartureDatesFrom="2011-03-01T12:01:23.00" To="2011-03-01T12:07:10.00"/><DepotReference DepotReference="EASTLEIGH"/><DepotReference DepotReference="CHANDLERS"/></TurnaroundDetail></Request></ns1:data>
      </ns1:TurnaroundDetail>
    When I open it in notepad I can see converted value
    <?xml version='1.0' encoding='utf-8'?>
    <TurnaroundDetail xmlns='http://isotrak.com/webservices'><sessionid>dcc4adcd-ce8f-403d-a1cf-01fcc5aab066</sessionid><data>&#60;Request xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">&#60;TurnaroundDetail>&#60;PlannedJobDepartureDatesFrom="2011-03-02T08:28:29.00" To="2011-03-02T08:38:09.00"/>&#60;DepotReference DepotReference="EASTLEIGH"/>&#60;DepotReference DepotReference="CHANDLERS"/>&#60;/TurnaroundDetail>&#60;/Request></data></TurnaroundDetail>
    I hope this is not caused due to AnonymizerBean configured in receiver SOAP comm channel.
    anonymizer.acceptNamespaces   http://isotrak.com/webservices ''
    anonymizer.encoding  ISO-8859-1 (also tried utf-8)
    anonymizer.quote  ''
    Could you please suggest if I can get rid of "&#60;" character and get < less than sign? Or it is obvious behaviour by SAP XI system w.r.t Encoding and Receiver end needs to decode this character?
    Note: As per Web service requirement whole XML data to be processed by webservice is populated in single Data field. As here we are populating whole XML data file in one field named data
    Thanks in advance.
    Vinit.

    Simply typing "Test <test> test" into a frame and exporting that yields
    <ParaStyle:Body>Test \<test\> test
    and reading it back into ID gives the expected result.

  • Issues with less than and grater than condition in prompts in OBIEE 11g,

    Hi all,
    i am facing the prombles with less than grater than conditions in OBIEE 11g.
    i created two date prompts with presentation variables datefrom and dateto
    and i used these prompts in fileters like this using grater than and less than symbol.
    filters are as below:
    lastupdated date is grater than or equal to @{datefrom}{1/1/1950}
    lastupdated date is less than or equal to @{dateto){1/1/1950}
    and created two prompts
    creation datefrom >=
    creation dateto<=
    when i passing the dates 05/12/2004 and 05/12/2005 in prompts after clicking the apply button in OBIEE 11g it feches all the records but i need records between these dates. and one more thing is after clicking apply button the two date fields getting the same date..
    am i do any thing wrong in the above ???
    please let me know friends..
    waiting for ur replyyyyyy..
    Thanks
    Edited by: BI_user on Oct 12, 2011 2:10 AM

    Hi,
    Create date prompts with operator as = not >= (or) <= as you need to save that value in presentation variable and you are filtering report using those variable filters.
    Regards,
    Srikanth

  • Albumart for albums with less than 5 songs?

    So i REALLY would like to see the albumart on albums (for instance EP's, singles) with less than 5 songs. Is there any Terminal line to do this?

    When iTunes does not pick up artwork or the wromg artwork I usually just google image the albume and copy artwork, 500 x 550 is perferred if you want to use jukebox or large image, don't bother with anything under 300 x 300 as it will be blury. Go back into iTunes highlite all the songs on the album, right click and paste into the album art square.

  • Can you install snow leopard on Intel based mac with less than one GB of ra

    As the subject relay I have an Intel mac mini with 750GB of ram? will th einstaller let me install Snow Leopard?

    No, the installer will not let you install Snow Leopard on an Intel Mac with less than 1 GB of RAM. Even if it did, performance would be unacceptable & the OS would probably be unstable.
    If you want to run Snow Leopard you will need to upgrade to at least 1 GB of installed RAM. If you want it to run efficiently, you should install more. Typically, 2 GB will get you most of the benefits of a larger memory space but if your Mac supports more & you want the best possible performance, install the maximum the Mac can handle.

  • Maverick has been completing the update with less than one minute remaining now for well over an hour.  Where do I go from here?

    Maverick has been completing the update with less than one minute remaining now for well over an hour.  Where do I go from here?

    try this
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    if that doesn't work then connect to a computer and try to open the device in itunes

Maybe you are looking for