I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.

I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.

Thank you for responding.  I decided to upgrade to Acrobat 11 and it is now working fine.
There was no error message - the documents just closed. J.R. Ledbetter, CPL
5614 Turfwood Lane
Houston, TX 77088
Tel. 832/657-7027
email [email protected]
      From: Anubha Goel <[email protected]>
To: J. R. Ledbetter <[email protected]>
Sent: Thursday, March 5, 2015 8:12 PM
Subject:  I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.
I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.
created by Anubha Goel in Acrobat Installation & Update Issues - View the full discussionHi jr_ledbetter, Could you please let me know if you get any specific error message when the PDF closes automatically.Does Acrobat opens as itself or not?You might need to refer the KB doc link mentioned below:Doesn't launch after 30 days
Installed as part of a CS6 suite Let me know if this helps. Regards,Anubha If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7258293#7258293 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7258293#7258293 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Similar Messages

  • I just paid for, and downloaded Acrobat Pro, and it 'quits unexpectedly' each time I try to open it-b4 it even gets to the opening menu-. Any solutions??

    I just paid for, and downloaded Acrobat Pro, and it 'quits unexpectedly' each time I try to open it…b4 it even gets to the opening menu…. Any solutions??

    Did you install it in the administrator account with anti-virus disabled?

  • I reinstalled acrobat pro 9.0 on windows 7 Ultimate 64, it installed OK, When I open i get a large white popup screen which i cannot close... what to do?

    I reinstalled acrobat pro 9.0 on windows 7 Ultimate 64, it installed OK, When I open i get a large white popup screen which i cannot close... what to do?

    Hey jeroenb16613921,
    Please specify exactly when you get this white popup screen. While opening a PDF or launching Acrobat by double-clicking on the Acrobat icon.
    If it comes when opening a PDF, then where is this PDF actually stored?
    Let me know more on the same so that I can analyze the issue.
    Regards,
    Anubha

  • Gmail fails and closes always a few seconds after I open it in my new Windows 8 PC.

    A message error appears while I read or write messages. I can reopen Gmail but the problem repeats. Firefox works well with other webs. Gmail works well wi

    That means that Firefox has crashed.
    If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
    *bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
    *You can open the <b>about:crashes</b> page via the location bar, like you open a website.
    See:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter
    *https://support.mozilla.org/kb/Mozilla+Crash+Reporter
    See also:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes

  • Acrobat Pro and Reader 9.4.4 to 9.4.5 Updates Fail

    I was unable to get a satisfying answer via phone support, and after connecting with a supervisor, I was disconnected. So here goes...
    (Mac OS X 10.6.8) Adobe Updater 6  began notifying me recently that updates were available for Adobe Reader from 9.4.4 to 9.4.5, but my attempts to follow instructions resulted in Error 1301 "The update could not be applied because the Adobe Reader application contents were modified since the original installation. Please reinstall Adobe Reader and check for updates again."
    Adobe updater soon notified me of the need to update my Acrobat Pro from 9.4.4 to 9.4.5, but but my attempts to follow instructions resulted in Error 1301 "The update could not be applied because the Acrobat Pro application contents were modified since the original installation. Please reinstall Acrobat Pro and check for updates again."
    When Adobe updates its software, I shouldn't have to "reinstall" old software and "check for updates again" in order to install the update. Surely Adobe can offer a more direct, convenient way for customers to update their licensed software?

    I agree with rikbarry - I finally reinstalled Acrobat, then ran the 
    update to 9.4.5. The updater took nearly an hour to finish which can't 
    be normal, but the software appears to be the correct version now.
    I work for a very small graphic design company and use an older emac 
    that has pretty much reached its shelf life for many apps and OS. 
    Could my aging computer be contributing to the problem?
    Because we depend heavily on pdf workflow, I chose to reinstall 
    WITHOUT running the uninstaller first, as the 9.4.4 version was at 
    least still functioning. I was somewhat surprised that it worked, and 
    I am NOT looking forward to the next updater.

  • I switched to mountain lion and from Acrobat pro 9 to 10.  now safari will not open pdf files.  acrobat preferences says it is trying to use version9 to open and i removed version 9.  any ideas?

    I switched to mountain lion and from Acrobat pro 9 to 10.  now safari will not open pdf files.  acrobat preferences says it is trying to use version9 to open and i removed version 9.  any ideas?

    Make sure you have updated Acrobat X to the latest version 10.1.3.  They updated the PDF plug-in in 10.1.1:  http://kb2.adobe.com/cps/837/cpsid_83708/attachments/Acrobat_Reader_ReleaseNote_ 10.1.1.pdf#page=4

  • Trying to reinstall Acrobat Pro X from disc onto win 8.1 system. (Previous installation got corrupted) Continually getting message 'Acrobat has detected another process which has not yet completed-'. Have now closed system both cold (full shutdown) and wa

    Trying to reinstall Acrobat Pro X from disc onto win 8.1 system. (Previous installation got corrupted) Continually getting message ‘Acrobat has detected another process which has not yet completed…’. Have now closed system both cold (full shutdown) and warm (restart) over 10 times. Every time I go to reinstall I get message.

    I would run http://labs.adobe.com/downloads/acrobatcleaner.html and delete any Acrobat folders that have been created, then try again. Be sure to log in as the administrator and disable anti-virus when you have problems like this.

  • I recently bought a new macbook and installed Acrobate Pro. My settings/preferences did not come over and I do not have the same style options for my signature.  It now only allows me three options and the style I have been using for the last year is not

    I recently bought a new macbook and installed Acrobate Pro. My settings/preferences did not come over and I do not have the same style options for my signature.  It now only allows me three options and the style I have been using for the last year is not there.  How do I add additional options and get my preferred signature style back?

    Hi Amanda ,
    Which version of Acrobat are you using?
    Which signature style are you talking about?
    You can go ahead and try uninstalling and reinstalling it and see if that works for you .
    Use the cleaner tool to uninstall it .Here is the link.
    Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
    You can refer to the following link to re install it .
    https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
    Regards
    Sukrit Dhingra

  • I just updated Acrobat Pro and now I am unable rotate and save .PDFs - Help!

    I have Adobe Acrobat 9 Pro.  I updated this via the Adobe site on Friday.  Now I am unable to do two very important editing tasks that I was previously able to do.  I am unable to rotate individual pdf pages within a larger set.  I am also unable to rotate a pdf sheet and save it.  Please help!

    I uninstalled the update completely and reinstalled 9 Pro.  I don't remember the version number of the update.  I updated it on Friday so I assume it was whichever is the latest.
    I am unable to save the file after I rotate the sheet.  I can do a save-as, but it does not save the sheet as I rotated it.  I am also unable to select and rotate an individual sheet within a larger set.
    - Peter
    Peter L. Iezzi, RA
    Richard M. Cole & Associates
    15 South 3rd St., 3rd Floor
    Philadelphia, PA 19106
    T: 215.922.6930
    www.rmcoleassoc.com

  • I purchased and downloaded Acrobat Pro XI and have installed it.  I want to create a reinstall disk should I ever need it.  I planned on using a DVD.  I'm running Win 7 Pro w/SP1.

    I purchased and downloaded Acrobat Pro XI and have installed it.  I want to create a reinstall disk should I ever need it.  I planned on using a DVD.  I'm running Win 7 Pro w/SP1.

    Hi halb10567672,
    You can download the setup file again from this Link (Download Acrobat products | Standard, Pro | XI, X ) and Burn it to a DVD Disc using Windows Explorer.
    Please revert back for any further query or assistance.
    Regards,
    Rahul

  • Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.

    Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.

    Hi cruzsanta03,
    Can you please let us know the following:
    - Operating System;
    - Complete version of Acrobat installed;
    - Experiencing this issue with a particular file or all PDF files;
    - Experiencing this issue while performing a particular task or with any task;
    - Files are saved on the local machine or on a share drive;
    - Launch Acrobat in Safe Mode and then check the issue. Hold 'Shift' key and launch Acrobat, and then check the issue.

  • I've signed up for a subscription to acrobat pro and successfully download 2 days ago. Now when I try to open pdf it asks if I want to sign up again and will not allow me to open the document.

    I've signed up for a subscription to acrobat pro and successfully download 2 days ago. Now when I try to open pdf it asks if I want to sign up again and will not allow me to open the document. Can anyone give me assistance?

    Hi Mbs@adobe,
    It sounds to me like you're trying to open a PDF via one of the Acrobat online services, not via Acrobat. Did you install the file that you downloaded after you signed up? Once you do, Acrobat will be installed on your computer, and you can run it locally (you don't access an Acrobat Pro subscription via the web--it works just like a version of Acrobat that you might purchase from the Adobe Store, or a large retailer).
    Then, you'll open the Acrobat application from your desktop and choose File > Open to open your PDF file.
    Please let us know how it goes.
    Best,
    Sara

  • Acrobat Pro and Reader fighting for Safari frameworks folder...

    We manage hundreds of Macs of which most are at 10.4.8.
    We have both Acrobat Pro and Reader 7.0.8 installed on all Macs.
    Sometime within the last few weeks something has changed on our systems (eg: upgrading from something under 10.4.8 to 10.4.8) that is causing Acrobat Pro and Reader to fight for the Safari.app/Contents/Frameworks/ folder. This folder contains aliases to either Pro or Reader frameworks within that Acrobat app's own frameworks folder (...Acrobat Pro.app/Contents/Frameworks/)
    This issue is that the end user is prompted to authenticate for either Reader or Pro to "repair itself" which it is just changing the aliases within the Safari Frameworks folder to point to their own frameworks.
    If I set Preview as the default pdf viewer and then delete Acrobat Reader so that only Preview and Acrobat Pro are on the client, then it seems to work beautifully without authentication request. We would like to keep Reader on the systems though. We use Sassafras' Keyserver with a limited number of licenses for Acrobat Pro.
    Has anyone else experienced this? Found a solution, etc?
    Thanks!

    I agree with rikbarry - I finally reinstalled Acrobat, then ran the 
    update to 9.4.5. The updater took nearly an hour to finish which can't 
    be normal, but the software appears to be the correct version now.
    I work for a very small graphic design company and use an older emac 
    that has pretty much reached its shelf life for many apps and OS. 
    Could my aging computer be contributing to the problem?
    Because we depend heavily on pdf workflow, I chose to reinstall 
    WITHOUT running the uninstaller first, as the 9.4.4 version was at 
    least still functioning. I was somewhat surprised that it worked, and 
    I am NOT looking forward to the next updater.

  • I have downloaded a trail version of adobe acrobat pro and when I try to use it, it says that it cannot be edited in acrobat, please use adobe livecycle designer to edit this form. I can't work out what I need to do?

    I have downloaded a trail version of adobe acrobat pro and when I try to use it, it says that it cannot be edited in acrobat, please use adobe livecycle designer to edit this form. I can't work out what I need to do?

    Acrobat XI is not distributed with Designer. Designer is now a separate product. You can create forms in Acrobat as an AcroForm or using Forms Central (an online forms program). You can print the form to a new PDF and then recreate the fields in Acrobat using the recognize form fields. You will likely have to fix the form fields, but that would be the process. Generally, once a form is taken to Designer, you can't bring it back without such steps.
    Designer is available with AA8 - AAX, but since is a separate product as I indicated.

  • Install order of Acrobat Pro and other CC applications

    I work at a college and we're just getting started with Creative Cloud. When setting up the first seat of CC for my institution, it was a device license on a Windows 7 system. Only after my first attempt failed did I find the instructions for the command-line install of Acrobat Pro, and that it needed to be done before any other CC applications. This was surprising, but the instructions were effective after I uninstalled everything and started over.
    Now I have a named user to set up on a Mac OS 10.9.5 system, and I'd like to do it right the first time. Anyone out there have any advice for me on this?
    TIA, David

    The command line install for Acrobat Pro Windows 7 is not that bad, the install information is all included in the packager once the its created.
    In your exceptions folder there is file called Exceptioninfo.txt, if you read this you will see the correct way to install using command line.  Below is an example of how to create a batch file to double click instead of typing these commands repeatedly.
    Going even one step further you can do the following.
    1) Copy the deployment package to the desktop
    2) in the Exceptions folder create a new text document and call it "Acrobat_installer" or something of that nature, copy and paste the following into it.
    cd \users\(username) \desktop\(Package folder name)\(package name)\Exceptions
    ExceptionDeployer --workflow=install --mode=pre
    3) Enter your windows user profile name in (user name) - Enter the (package folder name) enter the (package name you created)
    4) Save the text document as "Acrobat_installer.bat"
    Keep in mind you will copy this .bat file into the exceptions folder of your deployment package.
    Lastly ensuring the user name is correct, run the batch file(.bat)  on the PC.
    Here is my example:  Bold are the parts I mentioned above.
    cd users\cpreslar\desktop\TAG_CCIP_7_14_2014\TAG Creative Cloud Installer Package 7142014\Exceptions
    ExceptionDeployer --workflow=install --mode=pre
    Feel free to use this next time you have to do a windows deployment.

Maybe you are looking for

  • How to find out the caller of a method?

    Hi there, I wonder if there is a recommended way to find out, from which code a method gets called. My only idea is to create a stacktrace with new Exception().getStackTrace() and inspect the 2nd stacktrace element. Does anyone know if there is a bet

  • Function Module for Excise and VAT Calculation

    Dear All, I required one Function module for calculation of Excise % and amount of Invoice Verification Document. We are use TAXINN tax procedure. I am try to make Purchases Register where we required the Break up of Full tax amount as basic excise d

  • Html page maximize

    Hi All, i have small doubts in html page, actually my client requirement is to increase the size the of the html page, i already gave the height and width, but he wants maximize button, actually maximize button is disabled  in my html page, how to en

  • Created 5 Web Banners - how would I be able to cycle them in a row?

    Hi All, I created 5 animated banners, and I'd like to be able to cycle them in a row, one after the other.  I don't know if this is built-in - trigger multiple animations or something, or if I'd need to add some Javascript to an HTML page?  (They'll

  • Need Firefox update for my Mac laptop, OS X 10.4.11, as I'm currently running Firefox 2 ... help!

    My kids somehow threw away the previous version of Firefox that we were using, and not we are somehow using v 2. This is a mess! Can you please provide me with an easy to use link or something, so that I may update my laptop with the latest version t