I rendered a project as an mp4, but it never prompted me where to save it and after it rendered I co
I rendered a project as a mp4 and it never prompted me where to save it and after it was rendered I couldn' find it anywhere. Where did
the mp4 go????
When you use the AE Render Queue (Add To Render Queue or Make Movie commands), there are two different components that appear in the queue: Render Settings and Output Module. The Output Module determines the media container & codec of the rendered file, and also sepecifies the destination folder for the rendered file.
You'll find the Rendering & Exporting basics here.
And if you are attempting to use AE intuitively, you really owe it to yourself to check out that link posted above. Those who ignore the basics do so at their peril, and that's no joke.
Similar Messages
-
my iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!
If your contacts are synced to your computer then they are in the supported app you are syncing with.
When you set up syncing of contacts on your device, which application did you select? -
My problem started when system preferences was unresponsive and would not force quit. I tryed to restart and got the grey screen, but it never restarted. I closed the lid and now the screen is blank. Has anyone had a similar problem after Lion installation?
No, as I have yet to be convinced on Lion.
Did a permissions repair help from the install DVD? -
I try to connect to wifi in hotel. It shows its connected to the network but it never takes me to sign on screen and will not connect even though wifi shows full bars
Have you tried clearing Safari? Clear Safari, close Safari completely and reboot your iPad. Try again.
Go to Settings>Safari>Cookies and Data.
If you are running iOS 5 or iOS 6 you close apps like this. Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
If you are running iOS 7, you close apps this way. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
I have a MAC laptop, there used to partition windows XP but I want to change it to windows 7. and after my intstal do not want the road and a partition for windows missing. how to restore windows partition?
Welcome to Apple Support Communities
You have an Early 2008 Mac Pro. You have the specs that your Mac Pro needs for more memory > https://support.apple.com/kb/HT4433#4 As you can read, that computer should have come with 2 GB of memory.
You can buy memory at OWC or Crucial > http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#800-memory Those sell compatible memory with all Macs. You can use another memory, but you can be sure that the memory that these brands sell are compatible -
When I go to my iMessage, it has me long in. I never logged out, but I can get to the part where it says "next" and I click that. then it will say verifying, but then take me back to the log in page and it doesn't tell my my username or password is wrong. how can I fix this?
iOS: Troubleshooting FaceTime and iMessage activation
FaceTime, Game Center, Messages: Troubleshooting sign in issues -
Hi All,
I am trying to execute the below code as provided from one of the blogs. i am able to run the job only once based on a file watcher object(i.e. for very first time) and after that the job is not running at all and if i schedule the job to run automatically based on interval of 10 or more minutes it is executing properly). Please let me know or guide me if i have missed any step or configuration.that is needed.
Version of Oracle 11.2.0.1.0
OS : Windows 7 Prof
Given all the necessary privileges
BEGIN
DBMS_SCHEDULER.CREATE_CREDENTIAL(
credential_name => 'cred',
username => 'XXXX',
password => 'XXXX');
END;
CREATE TABLE ZZZZ (WHEN timestamp, file_name varchar2(100),
file_size number, processed char(1));
CREATE OR REPLACE PROCEDURE YYYY
(payload IN sys.scheduler_filewatcher_result) AS
BEGIN
INSERT INTO ZZZZ VALUES
(payload.file_timestamp,
payload.directory_path || '/' || payload.actual_file_name,
payload.file_size,
'N');
END;
BEGIN
DBMS_SCHEDULER.CREATE_PROGRAM(
program_name => 'prog1',
program_type => 'stored_procedure',
program_action => 'YYYY',
number_of_arguments => 1,
enabled => FALSE);
DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT(
program_name => 'prog1',
metadata_attribute => 'event_message',
argument_position => 1);
DBMS_SCHEDULER.ENABLE('prog1');
END;
BEGIN
DBMS_SCHEDULER.CREATE_FILE_WATCHER(
file_watcher_name => 'file_watcher1',
directory_path => 'D:\AAAA',
file_name => '*.txt',
credential_name => 'cred',
destination => NULL,
enabled => FALSE);
END;
BEGIN
DBMS_SCHEDULER.CREATE_JOB(
job_name => 'job1',
program_name => 'prog1',
queue_spec => 'file_watcher1',
auto_drop => FALSE,
enabled => FALSE);
DBMS_SCHEDULER.SET_ATTRIBUTE('job1','PARALLEL_INSTANCES',TRUE);
END;
EXEC DBMS_SCHEDULER.ENABLE('file_watcher1,job1');
Regards,
kumar.Please post a copy and paste of a complete run of a test case, similar to what I have shown below.
SCOTT@orcl12c> SELECT banner FROM v$version
2 /
BANNER
Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
PL/SQL Release 12.1.0.1.0 - Production
CORE 12.1.0.1.0 Production
TNS for 64-bit Windows: Version 12.1.0.1.0 - Production
NLSRTL Version 12.1.0.1.0 - Production
5 rows selected.
SCOTT@orcl12c> CONN / AS SYSDBA
Connected.
SYS@orcl12c> -- set file watcher interval to one minute:
SYS@orcl12c> BEGIN
2 DBMS_SCHEDULER.SET_ATTRIBUTE
3 ('file_watcher_schedule',
4 'repeat_interval',
5 'freq=minutely; interval=1');
6 END;
7 /
PL/SQL procedure successfully completed.
SYS@orcl12c> CONNECT scott/tiger
Connected.
SCOTT@orcl12c> BEGIN
2 -- create credential using operating system user and password (fill in your own):
3 DBMS_SCHEDULER.CREATE_CREDENTIAL
4 (credential_name => 'cred',
5 username => '...',
6 password => '...');
7 END;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- create table to insert results into:
SCOTT@orcl12c> CREATE TABLE ZZZZ
2 (WHEN timestamp,
3 file_name varchar2(100),
4 file_size number,
5 processed char(1))
6 /
Table created.
SCOTT@orcl12c> -- create procedure to insert results:
SCOTT@orcl12c> CREATE OR REPLACE PROCEDURE YYYY
2 (payload IN sys.scheduler_filewatcher_result)
3 AS
4 BEGIN
5 INSERT INTO ZZZZ VALUES
6 (payload.file_timestamp,
7 payload.directory_path || '/' || payload.actual_file_name,
8 payload.file_size,
9 'N');
10 END;
11 /
Procedure created.
SCOTT@orcl12c> -- create program, define metadata, and enable:
SCOTT@orcl12c> BEGIN
2 DBMS_SCHEDULER.CREATE_PROGRAM
3 (program_name => 'prog1',
4 program_type => 'stored_procedure',
5 program_action => 'YYYY',
6 number_of_arguments => 1,
7 enabled => FALSE);
8 DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT(
9 program_name => 'prog1',
10 metadata_attribute => 'event_message',
11 argument_position => 1);
12 DBMS_SCHEDULER.ENABLE ('prog1');
13 END;
14 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> BEGIN
2 -- create file watcher:
3 DBMS_SCHEDULER.CREATE_FILE_WATCHER
4 (file_watcher_name => 'file_watcher1',
5 directory_path => 'c:\my_oracle_files',
6 file_name => 'f*.txt',
7 credential_name => 'cred',
8 destination => NULL,
9 enabled => FALSE);
10 END;
11 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> BEGIN
2 -- create job:
3 DBMS_SCHEDULER.CREATE_JOB
4 (job_name => 'job1',
5 program_name => 'prog1',
6 queue_spec => 'file_watcher1',
7 auto_drop => FALSE,
8 enabled => FALSE);
9 -- set attributes:
10 DBMS_SCHEDULER.SET_ATTRIBUTE ('job1', 'PARALLEL_INSTANCES', TRUE);
11 END;
12 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- enable:
SCOTT@orcl12c> EXEC DBMS_SCHEDULER.enable ('file_watcher1, job1');
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- write file (file must not exist previously):
SCOTT@orcl12c> CREATE OR REPLACE DIRECTORY upncommon_dir AS 'c:\my_oracle_files'
2 /
Directory created.
SCOTT@orcl12c> declare
2 filtyp utl_file.file_type;
3 begin
4 filtyp := utl_file.fopen ('UPNCOMMON_DIR', 'file1.txt', 'W', NULL);
5 utl_file.put_line (filtyp, 'File has arrived ' || SYSTIMESTAMP, TRUE);
6 utl_file.fclose (filtyp);
7 end;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- wait long enough (may take more than one minute) for job to run:
SCOTT@orcl12c> EXEC DBMS_LOCK.SLEEP (100)
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- check for results:
SCOTT@orcl12c> SELECT * FROM zzzz
2 /
WHEN
FILE_NAME
FILE_SIZE P
22-OCT-13 10.12.28.309000 PM
c:\my_oracle_files/file1.txt
57 N
1 row selected.
SCOTT@orcl12c> declare
2 filtyp utl_file.file_type;
3 begin
4 filtyp := utl_file.fopen ('UPNCOMMON_DIR', 'file2.txt', 'W', NULL);
5 utl_file.put_line (filtyp, 'File has arrived ' || SYSTIMESTAMP, TRUE);
6 utl_file.fclose (filtyp);
7 end;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- wait long enough (may take more than one minute) for job to run:
SCOTT@orcl12c> EXEC DBMS_LOCK.SLEEP (100)
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- check for results:
SCOTT@orcl12c> SELECT * FROM zzzz
2 /
WHEN
FILE_NAME
FILE_SIZE P
22-OCT-13 10.12.28.309000 PM
c:\my_oracle_files/file1.txt
57 N
22-OCT-13 10.14.08.580000 PM
c:\my_oracle_files/file2.txt
57 N
2 rows selected. -
Muse is giving me "ended trial version window" but don't gives me where to put email and password
or a way to use my account, is there a way to uninstall it and erase register, to install it again from scratch?
Please i'm so urged i have work to do and deliver today.I hope you were able to get this resolved. If not, I recommend you contact support via chat or phone.
To reach support go to http://helpx.adobe.com/contact/ and select "Adobe Muse" from the Adobe Products drop down. (It's alphabetically under M.) Then select "Using my product or service" from the drop down and finally click "I still need help…". At that point a "Chat now" button will appear for starting a live chat session along with a phone number and the hours for Technical Support in your region. -
Jerks and pops in rendered results CS6
I have the creative cloud membership and I have the latest version of Premiere installed. Over several projects I will have Jerks and pops in the results of a file rendered as Mpeg2 HDTV 23.976fps. Preview playback is smooth while editing but the output has problems. The problems are consisten after repeated rendering. I found a workaround where I will Slip the clip one frame or so in either direction. Something changes and it gets redone without the same problems, but new errors start cropping up. I end up spending hours watching the final mpg2 file, slipping, and rerendering until I finally have a smooth product. This is a BIG pain in the butt! I surely hope this problem gets solved soon.
Okay Folks,
I never got the MPEG2 Encoder to work cleanly but I switched to the H.264 encoder and it worked on the first try! I always had problems playing my H.264 files so I pulled the bitrate down to 15Mbps instead of the default 32Mbps. The quality at 15Mbps is great and My computer was able to handle playback as well.
CHEERS! -
I deleted the folder that saves everything that is downloaded from Firefox. After that I can't download anymore. I've tried clearing my download history, reset the download folder, reset the download action by renaming the mimetype.rdfs file and it's still not working. I've tried to choose a different download folder but it doesn't let me select any folder at all. If I select "ask me where to save files" and then try and download something, the download doesn't start after I select save to. The only time it does actually download is when I select "open with...windows mediaplayer" when downloading then the download will start. Please help. Thank you.
You broke your phone by getting it wet. Nothing more to say. Bring it in to Apple for an out of warranty exchange or buy a new phone. There's really nothing else we users here can help you with.
-
When trying to re-install Firefox, it allows me to download it but when I hit run, it says its extracting and after that nothing else happens.
Are you sure the virus is cleaned off your PC?
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]
Download and Run TDSSKiller [http://support.kaspersky.com/faq/?qid=208283363 http://support.kaspersky.com/faq/?qid=208283363]
Download and Install Microsoft Security Essentials [http://windows.microsoft.com/en-US/windows/products/security-essentials http://windows.microsoft.com/en-US/windows/products/security-essentials] (not an official endorsement, but I personally recommend MSE as an awesome permanent anti-virus)
Double check for all Windows Updates.
Then, delete the firefox you downloaded, go to [http://www.getfirefox.com www.getfirefox.com], redownload and try to install Firefox again. -
I saved my completed rendered video in Publish and Share as an MP4, but where is the file saved to. I set it to be saved on my desktop, but I don't see it. thanks
markg
What version of Premiere Elements and what computer operating system? You have a few other threads awaiting follow up, and consequently that information
is not available elsewhere.
What is your specific export...
Publish+Share
Computer
AVCHD
and Presets = MP4 - H.264 1920 x 1080p30 or something like that.
Specific please.
But what specifically are you entering in the Save In: field of the dialog that includes the Save button to initiate the export process.
Are you saving it as a file to the Desktop or to a specific folder on the Desktop? Have you given the export a distinctive file name?
The screenshot shows the Save In: to the Desktop as a file.
I have no idea of your background with the program, so I ask these questions so as to take nothing for granted.
If the computer Desktop is crowded, as mine often is, it is easy to have difficulty spotting a file save to the Desktop.
We will be watching for your follow up.
Thank you.
ATR -
When rendering a project, FCPX did not stop at 100% but appeared to keep rendering - when it reached eleven thousand something, I quite FCPX (it allowed me to quit).
The background tasks indicator just kept going and going... 200, 300... 400... 600...800... When I opened the background tasks window, the only process it said was active was rendering.
I clicked on "stop" but it ignored me, kept counting on and on.... 1000... 2000,,, 5000 I clicked Pause, it didn't ignore me but still kept counting... 7000... 10,000...
I went to my activity monitor on my mac and from what it said (like, 97% or so idle), I surmised that it actually had stopped rendering. So I quit FCPX - no problem, no "not responding" or "force quit" or anything.
My external harddrive was still whirring (that's where my project is stored) so with much trepidation I ejected it: no problem...
After my question I (agian with much trepidation) opened FCPX, did some editing, rendered, exported, without problems.
But I'm concerned about what might have caused this bizarre behavior and what to do if it happens again.
any thoughts??? -
AME CC renders AE projects progressive (not interlaced)
Hi folks,
we updated to CC 2014.2 last week and are now stuck without fields - and as a broadcaster broadcasting 1080i we desperately need interlaced files!
Here´s the detail:
For a quick demonstation I created a simple AE project (CS6) with a blue bar rotating around the center.
This same composition is opened in AME CS6 and in AME 2014.2 and rendered with the identical settings:
This is the result from AME CS6:
This is the result from AME CC 2014.2
During the last week we tried everything to convince AME 2014.2 to render in fields - but we didn´t succeed...
The only workaround is:
open the AE composition in PremierePro
interpret it as "upper field"
place it into a sequence
send this sequence to AME
Then AME renders it interlaced...
Please note
I´m not talking about interlaced or progressive videomaterial but about the field handling of AE animations itself in AME
under "Quelle/Source" it says "progressive", but you can´t change the interpretation on a AE composition
in AME CS6 it says "progressive" as well but renders out fields
we tried this with several different projects and compositions on different computers (PC and Mac)
scary: identical sources with identical render settings produce different files in AME CS6 vs. AME 2014.2
it´s not just the field/progressive thing - mp4 files from AME 2014.2 are half size than from AME CS6
Thanks for your help - we really need our fields back... ;-)
Best regards
Andreas Schletter
GermanyI just ran a test and here's what I found.
Rendering from CC 2014 using the Render Cue and separating fields in the Project Panel gives you an interlaced file. Rendering from the AME and using h.264 you do not get an interlaced result even if you check the separate fields box. I I also tried Jpeg2000 quicktime from AME with the same result... no progressive render. I even tried doubling the frame rate in the AME, again no progressive render. The only way to get a progressive render in the latest build of the AME is by setting the comp frame rate in AE to double the standard frame rate. In your example 50 fps.
Here's how I test for interlacing.
If the footage is interlaced then there will be different positions for your blue bar for each frame if you drag your progressive footage into the new comp window, verify that the comp is the same frame rate as the footage (25 fps in your example) and that AE is properly interpreting the footage, then double the comp frame rate. if you step through the comp one frame at a time and each frame is different then you have interlaced footage but it is interlaced without the empty scan lines. After Effects has tried to fill in these scan lines as long as I can remember.
Looks like this is a bug. I'll file a report and suggest you do the same. In the mean time, if you have to use the AME to render your deliverables then the workaround is to double the frame rate in the comp before adding it to the cue. -
I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?
What Happened?
No way for us to know. But if your system was crashing, there definitely was a problem. The FCE error message you got normally indicates the FCE project file has been corrupted. This probably happened due to whatever caused your system to crash & shutting down the system.
First, make sure your system is running correctly. Then, use the Finder to navigate to /users/yourusername/Documents/Final Cut Express Documents/Autosave Vault and find the most recent backup copy of your FCE project file. Copy the file to your Final Cut Express Documents folder (copy the file, don't just move it). Then double-click the copy to open it in FCE. It should open ok, but will probably not have your most recent edits (transitions). You may have to rebuild the transitions, but at least you will be back in action.
Maybe you are looking for
-
Request could not be submitted for background processing
Using Crystal Reports XI R2 <br />Using Visual Studio .NET 2005 <br /> <br />Here's the scenario. The client goes to run a report and specifies the filters they want for the report. We load a pre-built rpt with no saved data and pass the filters in
-
What is the difference between: A. Enable for commenting and analysis in Adobe Reader (or Enable typewriter tool in Reader), and B. Extend features in Adobe Reader Enabling the commenting tool also enables the typewriter tool, but not vice vera. All
-
Any resolution with Xfi cards and Win 7 64bit with over 4gb??
I recently went from 2gb to 4gb and found that my xtremegamer will not work unless I set the GB below 4gb. I have all updated drivers. I don't want to decrease my ram or buy a new card/use onboard sound. I see that this issue has been ongoing for qui
-
Why can't I edit song information? How do I fix this?
I just upgraded to the latest itunes version and with songs that have been added since that time, I cannot edit the info for the songs. Any ideas?
-
For (i=0; i mgBW.length; i++) {
I'm trying to loop this but won't work. Could someone help me to get this fixed? var mgB:Array = [browseMC1, browseMC2, browseMC3]; var mgBW:Array = [targetMC1, targetMC2, targetMC3]; var mgPW:Array = [logoPreviewMC1, logoPreviewMC2, logoPreviewMC3];