I rent LR5 with PS CC; is Bridge CC included?

I rent LR5 with PS CC, is Bridge CC includet?

Cloud Plans https://www.adobe.com/products/creativecloud/buying-guide.html may help

Similar Messages

I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my p

I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my photos are stored bridge never gets to where I can work. The message appears "building criteria" and I get an endless loop on the lower left panel. How do I correct?

You correct it by leaving Bridge alone until it finishes rebuilding its cache, overnight if necessary.

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

Open With default Application in Bridge

When I double click a "RW2" file in Bridge my Photomatix application opens the file. Nowhere in the file associations do I see Photomatix or the "RW2" file format for that matter. I reset to default associations - still no joy. The only app showing in the "Open With" pull down in Bridge is "Photomatix (default)". How so I change this default to PS4?

To my knowledge RW2 is the Raw format for Panasonic ?
The file type association in Bridge prefs should be found under Panasonic.
In your situation it might show Photomatix. (mind you that Photomatix claims
to rather not convert Raw files in their own app because they have no good
converter for that and they are better in working with tiff). See if you
have the option to change this to CS4.
If not you will have to look in the supported Raw formats for your ACR
converter to see if your camera model is supported in the list for the ACR
plug in for CS4:
Try this link (otherwise find it with a search on the Adobe.com site):
http://www.adobe.com/products/photoshop/cameraraw.html
Mind that this is already the ACR 6 version that will only work with CS5.
Scroll down for the latest version for CS4 which should be ACR 5.7
Check your version in PSCS4: go to the menu Photoshop / about plug ins /
Camera Raw, This should show only one plug in with version 5.7
Also try to convert the files to DNG using Adobe's free DNG converter. DNG
files have much benefit and work also with older ACR and PS versions:
http://www.adobe.com/products/dng/
Problem is BTW longstanding, every vendor uses his own Camera Raw format and
to makes things worse, they also make a slightly different format for almost
every new type of camera they put on the market.
Adobe kindly delivers about 3 to 4 times a year a free new update for ACR
and DNG with support for most of those cameras.
It is best to first check compatibility with new cameras and third party
software. If you want to work with Raw files you better wait until support
is there or you have to use the vendor software (not always that nice to
work with)
The only app showing in the "Open With" pull down in Bridge is "Photomatix
(default)". How so I change this default to PS4?

HT1657 I rented Trouble with the Curve and haven't it yet and I when I went to watch the movie it tells me the file can not be found - please help

I rented Trouble with the Curve and haven't it yet and I when I went to watch the movie it tells me the file can not be found - please help

Yes, thank you. My apologies, I was typing one handed and did not add that.
Anyway, I have tried deleting the cache, deleting my pics and then re-syncing, etc. and nothing is working This is very frustrating, as I had no problems up until about 2 weeks ago, and now all of a sudden, I have this issue......UGH!

Trying to print 4x6 photos. How can I print with no borders on LR5 with my HP OfficeJet 7410? Even when in Print mode in LR5, my photos show a border. Page Setup shows "borderless". Image Settings show "zoom to fill". But cannot print, nor even previe

Trying to print 4x6 photos. How can I print with no borders on LR5 with my HP OfficeJet 7410? Even when in Print mode in LR5, my photos show a border. Page Setup shows "borderless". Image Settings show "zoom to fill". But cannot print, nor even preview, without borders.

JimHess~ Many thanks. In my short history with LR, it's amazing how many people I've seen ask this question. I'm nearly embarrassed at how simple the fix was, but grateful that you didn't dismiss such a basic question. You made my week. And my friend's photo album...

How can I enable the chinese subtilte in the rented movie with Chinese subtitle.

How can I enable the chinese subtitle in the rented movie with Chinese subtitle. Like "50 First Dates" in Hongkong Store.

You can do it with a trackpad but I am not sure about the mouse. Take a look at his link, http://support.apple.com/kb/HT4288

Current 1TB computer dying. Installing new 3TB drive next Thursday. Can I just go directly to my account and install Creative Cloud with Proshow Producer and Bridge with a hastle?

Current 1TB computer dying. Installing new 3TB drive next Thursday. Can I just go directly to my account and install Creative Cloud with Proshow Producer and Bridge with a hastle?

When I look at the forum index Welcome | Adobe Community I do not find a program called proshow
Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html
or
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq

Export Bridge Assets including metadata into searchable web gallery

Hi,
We have several thousand images that we have tagged with metadata in Adobe Bridge. We want to be able to export these images and their associated metadata into a searchable web gallery so that customers can search keywords or at the very least pick attributes in order to narrow down the image selection process.
What software has the ability to do this?
Thank you!
-Mike

Apologies.. my advice may have been wrong.. it is a while since I figured it out.. trying to remember what it was I did..you do have to shorten that file name.. but it may not be the caption you need to change. I suspect I may have selected all the images.. then gone to meta data batch change and done something under the custom button which then applied to all images.
In my case I needed to get the web address for the gallery created from:
http://homepage.mac.com/farish/Smartbins™%20Chewing%20Gum%20Bin%20and%20Cigarett e%20Bin%20Image%20Gallery/
down to:
http://homepage.mac.com/farish/Chewing%20Gum%20Bin%20Cigarette%20Bin/
I did manage it but can't quite remember how I did it.
I will keep playing and when I figure out what I did that worked will post again.
The web gallery name you choose affects how Google sees the site as when you publish the web gallery - the web gallery name can pop up in Google
It's quite difficult to figure out exactly what to do. If anyone else knows a definitive answer please advise!
Rgds

Can I use headphones/headsets with my ipad3 because they arnt included in the ipad box so have any of u used it and from where I can have them ?

Can I use headphones/headsets with my ipad3 because they arnt included in the ipad box so any of u used it and from where I can have them ?

Yes you can use earphones or earbuds. You can use iPhone or iPod earbuds and there are many other headphones that will work with the iPad - and bluetooth headphones wiill work as well.

How can I integrate metadata and keywords in Lightroom with those in Photoshop, Bridge, and Photoshop Elements? In other words, is there a way to retrieve common metadata templates from all modules? Thanks!

Keyword and Metadata Integration throughout Adobe Modules

Thanks! That's helpful.
What I mean by "common metadata", is a unified, updated, most current metadata, which I could update in each program. That is without overwriting the metadata, but appending new keywords to the metadata I created in the previous program.
I use Bridge, then Lightroom and finally Photoshop. That's the regular workflow: Bridge for preliminary sorting and and adding some keywords; Lightroom for organizing and picking the best images; finally, Photoshop for processing. I got Photoshop Elements on trial. Doesn't work for my purposes.
I need to share and update the metadata / keywords when I go from one program into another. Can't retrieve metadata I set up in Bridge into Lightroom. Same happens with Photoshop, where I can't retrieve keywords I add in Lightroom. It's tedious to write up the keywords again.
Thanks for your efforts!

Bridge Help | Work with metadata in Adobe Bridge

This question was posted in response to the following article: http://helpx.adobe.com/bridge/using/metadata-adobe-bridge.html

Might check this past post to see if you have ownership of your HD.
The key to solving this issue lies is understanding that in terms of Windows 7 Security, every internal or external hard drive, plus folders, sub-folders and files thereon has an OWNER. Also each OWNER has a certain level of PERMISSION to do things such as moving files to a different folder, deleting or re-naming them etc. If you try to do things that you don't currently have Permission to do, that is when you get an ‘Access Denied’ error message. Also your system has an Admistrator or Administrators and at the outset you need to ensure through the Control Panel that you are listed as one of them. .
If, like me, you didn't realise these things, (and why would you if Microsoft or your computer or hard drive suppliers couldn't be bothered to really make sure you knew about them), then trying to fathom the ‘Access Denied’ problem becomes a stressful and frustrating nightmare as I can testify having spent a week at it!
The steps that I took to resolve the issue and which I believe now constitute the 'Correct Answer' are as follows:
First make sure that you have Administrator rights on your system via the Control Panel
Next ‘right click’ on the Drive whose files you want to gain full access to, for example the drive that your pictures are stored on, and click on 'Properties'.
Under the Security tab you will see a list of Groups and Users on this drive and the Permissions that they have to do things.
Before doing anything to edit these Permissions, first click on the Advanced button. This opens another window with a tab showing the Owner of this drive.
Click on the Owner tab and if you are not already listed as the owner, make yourself the owner by selecting your name from the list. I believe it should appear there if you are an admistrator or user. (In my case at this stage the owner was initially shown as an obscure string of numbers and letters which I believe identified the drive when it was connected to the lap top I was using before I upgraded my machine)
Now be sure to check the box that says "Replace Owner on Subcontainers and Objects" and the click Apply. On completion of this step, the drive in question and all the folders, subfolders and files thereon should now be 'owned' by you. You could check this out by right clicking on a particular folder then clicking Properties > Security > Advanced > Owner. Your name should appear. So far so simples!
Now go back to the Security Tab for your drive (Step 2 / 3 above) and look at the Permissions you currently have. Your aim now is to allow yourself 'Full Control.' If you don’t currently have this level of permission click Edit, select your name on the list, check ‘Full Control’ and 'Apply' the change.
I think I'm right in saying that at this point whilst still working in the Drive directory you are now given the option of ticking boxes which allow you to, in effect, cascade the permission you have just granted yourself to all the files and folders on that drive. Tick the box to allow this and Windows should then take care of the rest.If I'm not quite correct here then in my particular case, for example, all my images were stored on my external drive. The top level, or 'parent' folder in which all my pictures could be found was the 'My Pictures' folder and I had created a number of folders and subfolders ('child ' folders) within that folder. The permissions I gave to the Parent folder – My Pictures – were cascaded down through the Child folders.
On completion of the above step I tested the result in Windows Explorer by dragging a few files back and forth between folders and it now worked perfectly - I was now able to move / delete / rename etc all files without now getting the dreaded access denied message. What a sense of relief! This meant that I could now open Bridge normally rather than having to right click it and 'Run As Admistrator' - albeit that is a very useful thing to do until you get the problem sorted as described.

I can not watch a rented movie with iTunes

I found the movie in the store (The Emperor (1080p HD)) and rented it thhrough my mini's (a 2.3 Ghz i5 w/ 16Gb Ram running Mac OS 10.8.4) iTunes app (version 11.0.5). I waited for the movie to download completely. I selected the "Rented" tab from my "Movies" Library and clicked on the movie icon (it had a strange appearance which was a generic light grey box with a fim frame in the middle). iTunes responded with: "This movie requires Quicktime, which is not supported by this version of iTunes.). I admit I was dumbfounded for a moment since I associate Quicktime with Apple media more closely than iTunes. I went to the file via Finder, and looked at the extension: m4v and tried to open it with Quicktime. Quicktime responded: "This application cannot be used to play "Emperor (1080p HD).m4v" In order to play this content, please open it with iTunes."
OK, I mumbled, I've seen nonsense like this before and it could be permissions based. My iTunes Library is on an external network drive because of its size. I'll copy the file to the local volume and see what happens. A few minutes later, the copy was complete. I added the file to my Library in iTunes, and this time the movie's icon image was correct. I launched to film. It opened and audio can be heard, but the video is absent. In its place is a field of alternating grey and white squares. I can watch any other video file at 1080p. The mini is connected via HDMI to a Yamaha AV receiver which outputs video to an Epson 5010 projector. Screenshots of the iTunes window appear the same when opened in Preview. I've changed the screen resolution from 1080p to 720 and 1080i and get the same result.
This evening's experiment is over since the rental ends in 24 hours now that I've -listened- to the audio.
Can anyone tell me why I had this experience and (outside of not renting another movie from iTunes) how I might successfully view an movie in the future?
Thanks

Hi Mikey1220,
Thanks for visiting Apple Support Communities.
If you have not been able to play the rented movie, I'd recommend starting with the troubleshooting steps in this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General> Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings >General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check theuser guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Next, try to download the movie again using the steps in this article:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
If your rental expired before you could view the movie, or if the behavior persists, you may want to report an issue with your purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Best Regards,
Jeremy

Using TImed Access mode on Airport Extreme with other routers in bridge mode. Not working as expected.

I am trying to setup timed access mode on my airport extreme in order to limit the times devices can connect to my network, but I am having some trouble.
My setup is as follows Cable Modem ---> Airport Extreme ---> Netgear router
The Airport is running DHCP and the Netgear is in bridge mode. The only purpose of the Netgear is to provide a wireless access point for older b/g wifi devices. The Netgear is connected to the Airport by an ethernet cable from one of its LAN ports. All ip addresses are supplied by the Airport.
When I list a device mac number in the Airport extreme's timed access table it does seem to block the device if the device trys to connect to the airport's wireless service, but the device is still able to obtain service through the Netgear wireless service. I want the device to be blocked on both wireless networks. I thought this would work since all DHCP is on the airport. Why is the Airport allowing the device to connect when it comes in through the Netgear?
In this example the device I am trying to block is 5c:59:48:ba:28:d2.
Looking at the log on the airport I see the following entry when the device (when permitted) connects to the airport wireless
Nov 30 22:43:12
Severity:5
Associated with station 5c:59:48:ba:28:d2
If instead the device connects to the Netgear wireless I see the following log entry on the airport (this connection gets through even if the mac address above is listed as blocked on the airport)
Dec 01 10:46:29
Severity:5
Connection accepted from [fe80::223:12ff:fe29:acfe%bridge0]:54774.
It appears that the Netgear router (while bridging the network) is somehow modifying the mac address format in a way that the airport does not recognise it as the device to block.
What can I do to fix this?
Thanks.

The Netgear wireless server has control over what what devices are allowed to connect.
Unless you tell the Netgear what devices you want to allow to connect, it will allow any wireless device to connect as long as it knows the wireless network password.
IF.... .you were using two AirPort Extremes, and not a Netgear, the two Extremes would communicate to each other....so you would only have to enter Timed Access settings on one router and other AirPort would automatically pick those settings up.
But, even this was not the case until the last year or so when Apple updated firmware. A few years ago, you might have had 2 Apple AirPort Extremes on the network, but you still had to manually set up Timed Access on both devices separately.
Bottom line, you need to setup the equivalent of Timed Access on the Netgear router.

Problems with SRW224G4 switch and Bridged Network Cards

Hello,
We have recently installed a SRW224G4 switch and have discovered that when we plug our DELL PowerEdge 2900 server into the switch, the switch loses all network connectivity and all of the LED's on the switch start flashing.
The server works perfectly well plugged into another switch, but as soon as we introduce the SRW224G4 into the network, either with the server plugged into that switch or any other, the problem re-occurs.
The only way we found we could eliminate this issue was if we disabled the Bridged Network connection on the two network cards on the server. If we do that, everything is fine, except the network performance of the server has dropped significantly.
The server is plugged into the 1GB ports on the switch, although we tried it on the 100MB ports and received the same problems. The switch reports that the ports are running at full-duplex.
Has anyone noticed this behavior before, and more importantly been able to rectify it.
Thanks in advance for your assistance,
Paul

I had this problem as well with any Linksys 2024 or rackmountable switch.. The trick is, you need to use the network cards management software to "team" or bridged the 2 NIC's otherwise the switch detects a loop and the whole thing locks up. So lame... Windows built in bridge mode stinks dont use it. When you use the Intel management software or Dell or HP's NIc management software you have the option to actually choose "redundant mode" where you can pick a Nic to be the primary, or you can choose Load Balancing where you can essentially double your throughput by joining the 2 nics.
In Windows 2008 Server, you actually do this by going to the Properties on the NIC in Device Manger. the software controls are now built right into the driver. pretty neat. 2003 you can check Device Manager the same way but not sure if it's the same as 2008, you might need to run the actual NIC management app.
Hope this helps
fdigi

I rent LR5 with PS CC; is Bridge CC included?

Similar Messages

Maybe you are looking for