I replaced hard drive then used recovery disks , but not working

i replaced hard drive with new one then used recovery disks , but  its not working.  laptop HP g62 64 bit with W7

Hi
Please boot unit to Bios using F10 key once unit is powered on go to Diagnostics check if the Hard Drive is getting detected. If not getting detected reseat the HDD & check if not issue with HDD & Solt of HDD.
If the HDD is getting detected under Bios please run the HDD test check if that passed.
Then under system configaration change the Boot order to CD/DVD to be First.
Insert the CD restart the unit or press Esc Button unit should detect the RCD in drive and give you the recovery option still does not work issue with DVD/HDD.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
*Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button. Thanks!
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

  • I got a new hard drive and my recovery disk won't work

    I need help with my laptop satellite C650D model no. PSC0YC-02V026
    I had to change my hdd and my recovery disk won't work.
    When i run the disk i get an error saying that some files can't be read from file or disk.
    if i click on the ignore button, i get the same message with a different file.
    BOOT64.WIM
    BCD
    BOOT.SDI
    ETFSBOOT
    and at the end i get another error message:
    Restore Wizard: initrecarea.exe - Application Error
    The instruction 0x7656FF26 level refers to the address
    0x01D70000 memory. The required data was not placed
    memory because of an I / O 0xC000009C standard error.
    Error 09-0000-0000
    I even try with an windows 7 iso but when it start, i'm being  asked for the cd/dvd driver, i download the driver but that didn't work either.

    Satellite C650D-02V (PSC0YC-02V026) 
    When i run the disk i get an error saying that some files can't be read from file or disk..
    You can obtain new recovery discs for that Canadian model from Toshiba by calling 800-663-0378.
    -Jerry

  • Replaced hard drive and used Recovery Manager via USB but now I don't have a D:recovery partition.

    I replaced my bad hard drive on my G62 Notebook and used HP Recovery Manager on a USB stick. Afterwords I restored from a back up but couldn't restore the D:recovery portion because the new hard drive doesn't have this partition. How can I create this now and restore the recovery partion now?

    Hi,
            When you reinstall the operating system using the USB recovery stick, it should create by default a recovery partation Drive D. Since you wont be able to create the partation manually. So if the HDD which you had replaced is not matching with the exact HDD which was shipped in the system, then it would have caused the issue. So try reinstalling the OS again.
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • Replaced hard drive cant run recovery disks

    I recently replace the hard drive on my pavilion model# g6-1d46dx. I purchased recovery discs from hp but when I try to run them after windows tries to open I get a disc no found error Any Ideas?? 

    Hi:
    You have to boot from disk 1 of the recovery disk set.
    Please see this guide for assistance...read the Recovery From Recovery Disks section.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&jumpid=reg_r1002_us...

  • Satellite L300D-202: Restore using Recovery disk does not work

    Good Afternoon,
    Wonder if anyone can shed some light on the following error message I get when trying to restore my laptop...
    "Setting access permissions V:\HDDRecovery...
    V:\HDDRecovery The system cannot find the file specified
    Unpack WinRE...
    ImageX Tool for Windows
    Copyright Blah.....
    Error Opening file [V:\HDDRecovery\SWImg\06546XSP.svml
    ERROR: ImageX could not apply WinRE V:\HDDRecovery\SWImg\06546XSP.svm Index 1 from HDD to W:!
    Press any key to continue..."
    After this I am left with the Toshiba recovery software running with no action and an Active DOS screen but nothing happening...
    I'm guessing HD fault, Recovery media received today from Toshiba for this system
    Laptop is:
    Satellite L300D 202
    NB. If i restart the laptop boots so far and displays BOOTMGR is missing Ctrl Alt Del to restart...
    All help much appreciated,
    Thanks in advance,
    Rick0684

    > NB. If i restart the laptop boots so far and displays BOOTMGR is missing Ctrl Alt Del to restart...
    Hmm... for me it looks like the notebook does not boot from the disk (DVD) but it tries to boot from the HDD....
    Anyway, did you try to boot from another disks; for example Win XP, Linux Live CD?
    Do this and check if this is possible... if yes, format the HDD and try to boot from the recovery disk again!
    PS: Did you try an HDD recovery option?
    Power up the unit, press F8 and in choose Repair my Computer
    After that choose Toshiba HDD recovery option if possible.

  • I will using of firefox but not working shortcut key of website.

    I will using of firefox but not working shortcut key of website.
    It's working in chrome and I.E.

    Check the connection settings.
    *Tools > Options > Advanced : Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

  • I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • Since replacing hard drive, "restore previous session" button doesn't work, can only do it through history tab. Also will not start up from task bar icon.

    Hi, been using Firefox for some years, had to replace hard drive recently and re loaded Firefox. Since then, the restore previous session button doesn't work, but I can do it from the History tab. Also Firefox itself won't start from the task bar or desktop, only the start menu.
    Using Windows XP

    This function may not be available for mobile yet. You can put your suggestions to the [[Suggestion Box]]. Thanks!

  • How can I download Adobe Reader to an external hard drive to use on a machine not internet connected

    I am trying to download Adobe Reader to my external 1Tb hard drive to use on a desk top that is not connected to the internet for security purposes. how can I choose which drive to save the download to?

    I have the Windows link handy, ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.0/en_US/AdbeRdr1010_en_US.msi
    For Mac (I haven't tested it), but the following link should work: ftp://ftp.adobe.com/pub/adobe/reader/mac/10.x/10.1.0/en_US/AdbeRdr1010_en_US.dmg

  • Vista has left the building...and the Recovery Disks do not work correctly.

    I've spent over a month and a half trying to fix my non-booting Satellite A215-S5818 running Vista.  Sometime mid-March (ah, the Ides of March!) I think I downloaded an automatic update and I remember the next time it booted my desktop was black; icons but no background picture.  Then I noticed on the bottom right it was saying my copy of Vista was not genuine.  I know that it is, because it is pre-installed.  So I ran check disk from the Properties page of C: in Windows Explorer. After it ran, I got BSOD.  At first I just booted into SafeMode and tried to disable whatever hardware/uninstall whatever software was causing the problem.  I think I got it to boot in SafeMode once or twice, then no more.  For a while I kept getting IRQL-NOT-LESS-OR-EQUAL, but I somehow stopped that through the command prompt(forum advice?).  Startup Repair could not fix it,  System Restore would not work on ANY restore points, even before March. The new BSOD error was:
    "STOP: c000021a {Fatal System Error}-
    The initial session process or system process terminated unexpectedly with a status of 0x00000000 (0xc0000221 0x00100594)"
    From then on I could only get a command prompt through the Repair Console.  So I xcopy-ed my Users directory to an external hard drive and grudgingly booted from the Toshiba CD, knowing it would obliterate everything, but I was desperate.  I got the 03-EEEE-0000 error.  Now I have a plethora of useless(?) CDs and DVDs I have burned ISO images on of any Freeware I thought could fix it, downloaded from the Internet using my husband's Windows 7 desktop computer.  I followed these instructions to the letter and it worked (I guess; it started immediately, no DOS objection), but when it rebooted I got a window (!) saying something about the type of hardware.  I haven't added or changed any hardware, but I have updated the BIOS recently.  So I clicked OK (no other choice), and now every boot up I get a window saying "Windows could not complete the installation.  To install Windows on this computer, restart the installation".  Startup Repair does not find any problems.  Could it be the BIOS?  I have re-flashed it twice, no difference.

    Oops! Sorry that was stupid on my part.
    From the command prompt you could type in   systeminfo   , and hit the 'Enter' key, it will take a little while to run, when it finishes, scroll back up to the top and you'll see OS Version and Service Pack you've got loaded. But, if you're booting off the recovery disk, that's the system info you'll get.
    If you can't get to the command prompt from the Advanced Boot Options menu, by trying to boot off the hard drive, and pressing F8, I'm not sure how you can find what Service Pack you have loaded.
    By using the Recovery Boot Disk, have you exhausted all the recovery options that Jerry linked before?
    What are the system recovery options in Windows Vista?
    How to use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair start...
    Mike

  • A10 Hard disk failure and replacement - How do I use Recovery Disks?

    I have a Satellite Pro A10 which has suffered a hard disk failure. I have replaced the hard disk drive (with a non-toshiba drive) but cannot load the operating sysytem etc from the recovery disks supplied with the computer when new. When starting the computer up with recovery disk No 1 in the CD drive I get the message "Invalid system disk, Replace the disk and then press any key" Any suggestions as to the remedy would be most welcome.

    Hello Tony
    Please check at first if your new HDD is properly recognized by BIOS. It yes you should prepare the HDD for installation. I recommend you to use some tool and make a partition on new HDD. If you want you can format it before you start the installations procedure.
    I am pretty sure that after that the recovery installation can be done successfully.
    Bye

  • Burning A Disk Image into hard drive then using Disk Utilities to make DVD

    I am having problems burning a 5GB project onto a DVD+R DL 8GB, so I decided to create a disk image onto my desktop and then use Disk Utility to burn the DVD. Any feedback on this workaround? Thank you very much. Maria

    The disc image will not preserve your layer break point, so if you've set that at a specific place, it'll get changed. When burning from a disc image, the first layer will get filled up, then the second layer will begin to be used. Other than that issue, burning from a disc image will work. You'll also be able to set the burn speed with Disk Utility.
    Also, burn with Verbatim DVD+R DL discs for best results.

  • Replacing hard drive and system recovery

    I have a HDX 16 1155CA laptop running Windows 7 ultimate (upgraded from the pre-installed Vista). I recently dicovered a bad sector or several bad sectors on my hard drive using many diagnistics tools. SMART info indicates 3 pending sectors. Also,the hard drive failed the self test under BIOS self diagnostics. As my computer may be facing imminent hard drive failure, I'd like to replace the hard drive. Are there any HHDs with larger storage space and higer RPM compatable with this laptop? Also, i can't create a second set of recovery disks containg my current system and settings, how would I be able to recover my system/data and how should I back up all my current files?
    Thanks.
    This question was solved.
    View Solution.

    Hi:
    You can use the Windows 7 backup and recovery system to make a ghost image of your current hard drive contents onto a portable hard drive.  You will also have to make a boot CD which it will give you the option of doing, to access the recovery files, and reinstall your current configuration.
    However, if I were you, I would back up any files, music and photos separately that I didn't want to lose, just in case the reinstallation fails.
    While HP doesn't show any upgrades for your hard drive, I would imagine you would be safe installing up to a 640 GB 7200 RPM SATA drive. It is a modern enough PC.
    You may also want to be on the safe side, and order a set of recovery disks for your notebook. They will be for Vista, but you can then go ahead and install W7 again.  A set of recovery disks normally costs around $16.00.
    Here is the link to your notebook's support page.  Under the "Alerts for this Product" section, you can click on the blue link that states "How to Order Recovery Disks"
    http://h10025.www1.hp.com/ewfrf/wc/product?product=3860262&lc=en&cc=us&dlc=en&lang=en&cc=us
    Paul

  • MacBook Pro 2012. Replaced hard drive yesterday by apple. Went home working and now it turns off and won't come back on till I plug it in... Help!

    Have had a ton of issues with my Mac. Went to the apple store in march and they said my processor could be going bad and they basically did nothing. Yesterday I was using my computer put it to sleep. 10 minutes later I opened it up and it completely crashed. Drove 2 hours to get to apple because I am away at school and need my computer for finals. They replaced my hard drive and it was working perfectly fine till today. Now it turns on and works and then shuts off and it won't come back on till I plug it in. It's completely charged and I need it for my classes. I have apple care but I can't keep driving back to apple every day. I have a apple appointment tomorrow but this is ridiculous. Has anyone had any of these issues? What's it going to take for them to replace my computer I can't even live a day without it right now. And by the way. I could not even get any of my data off my old hard drive. So basically nothing is on this computer right now.

    Kak4k8 wrote:
    I have apple care but I can't keep driving back to apple every day. I have a apple appointment tomorrow but this is ridiculous. What's it going to take for them to replace my computer I can't even live a day without it right now.
    Let them know how this is inconveniencing you.  For a replacement, I believe Apples general rule of thumb is if it comes in for the 3rd time for the same issue they will replace it, but it may vary by store.  It cant hurt to ask for a replacement.

  • How to copy catalog from external hard drive to computer hard drive to use smart previews when not connected to external hard drive?

    I am very new to LR5. I have LR5 set up so that my catalog and photos are on an external hard drive. I found out that when not connected to the hard drive, LR5 cannot find my catalog, therefore, I cannot do any editing in smart previews unless connected to the external hard drive. How can I fix this issue so that I can edit photos without being connected to the external hard drive. Is there a way of copying the catalog off the hard drive on the computer hard drive or do I need to reestablish a new catalog using LR5? Does the catalog always need to be loaded on the hard drive? Thank you in advance.

    Yes that is correct. The LR catalog must be on the computers internal drive. Then when you have Smart Previews enabled you can edit image without having the drive they are on connected. Then when you connect that drive the images will be updated.
    Just COPY those 4 folders over to your internal drive to a folder called Lightroom Catalog that you create. Then Open LR and go to the File menu item and select Open Catalog. Browse to the folder you created called Lightroom Catalog and select the Lightroom 5 Catalog.lrcat file and click Open. Once Lightroom restarts open the preferences, Edit>Preferences, and on the General Tab in the Default Catalog section make sure "When starting up use this catalog:" area lists where you have copied those folders. Something like Macintosh HD/Wherever you created that folder/That folder name/Lightroom 5 catalog.lrcat.

Maybe you are looking for