I replaced my hard drive and lost iPhoto. Is there a way to retrieve? I can not find the starter discs that came with my Macbook Pro.

Customer Service: Contacting Apple for support and service - this includes international calling numbers. You can purchase replacement discs from Apple.
Or, you can upgrade to Lion or Mountain Lion:
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Similar Messages

I want to install a new hard drive on my 2008 MacBook but do not have the instillation discs that came with my computer. Can I use instillation discs from a 2009 or 2010 MacBook?

I want to install a new hard drive on my 2008 MacBook but do not have the instillation discs that came with my computer. Can I use instillation discs from a 2009 or 2010 MacBook? The hard drive I am planning to install is a WD Scorpio Black 500GB SATA 2.5'' internal hard drive.

Sometimes they do work - i've done it before. I have a late 2008 Macbook Uni and used the install dvd of my 2009 Macbook White and it worked.
Why not just clone your hard drive? It'll save you a lot of time doing a clone rather than doing a clean install.
Unless you're having issues with your old set up or your old hard drive is dead.
You can download Carbon Copy Cloner - install your new hard drive in a external usb enclosure (around $10) and clone fromt here then test it before you install it in your Macbook.
Once you've done the swap, you can install your old hard drive in the USB enclosure and use it as a backup drive.
Good luck

My hard drive crashed, and I cannot reinstall the original OS that came with my macbook pro?

I bought my macbook pro (mid 2012 version) 10 months ago and it's been working fine up until now (running on Yosemite). When I opened the lid today, a flashing question mark appeared on the screen. I restarted my mac while holding the option key. I tried to do an internet reinstall but I can't get it to work. When I try to reinstall the OS that came with my mac, there are no options for me to click when asked to select a disk.
I have tried following instructions from multiple threads about how to change the disk utility.
Options on the lefthand side: "disk0" and "mac OS X base system". Options on the right: disk0 - first aid, erase, partition, and restore. Mac OS X base system - first aid, erase, restore.
None of the solutions I've found online are working for me. Most of the options in the disk utility menu are greyed out, so I can't click on them.
Sorry for any typos, it is hard to type this all out on my phone. I have tried to upload pictures, but it doesn't seem to be working. I also apologize if this is in the wrong category.

I want to wipe the hard drive on my apple G4 powerbook clean. I do not have the original discs that came with the laptop. I do have the OS x 10.4 disc that I purchased. When I reinstall 10.4 will that disc also have itunes iphoto and safari on it.

I have an apple powerbook g4 running 10.3.9 which my daughter gave me. However all the installation discs were lost. I just purchaed OS x Panther for it. I want to wipe the hard drive clean to get rid of all of her personal information as I want to donate the laptop to a needy family. Do I need the installation discs or will the panther os x disc have everything that I need to wipe the hard drive clean and install panther. I do have an external hard drive.

Hello again,
Some of those applications you mention will not be on the recently purchased OS 10.3 Panther disk so you'll need to make a copy of them so you can restore them later.
Copy to your external drive;
iPhoto, iMovie, iTunes* and you may also have World Book 2003 depending what bonus software was installed when new. There may be other Non Apple applications you want to keep also.
*You could probably still get a download of iTunes but because it is such an old version, to save searching for it, make a copy of it while it is in front of you.
Everything else will be the 10.3 Panther disk including Safari.
Ideally with original disks, the process would be:
Insert your Install disk 1 into the drive and then Restart, and hold down the C key to take you to the installation windows.
Select your language, the start up Disk and choose Erase and Install.
At the point your registration process starts, abandon the registration, quit and eject the disk and switch of the computer.
This will allow the new user a freshly installed system, whereby they can complete the registration process themselves.
However...
But as you want to add back iPhoto and iMovie etc, you'll proceed to create an Admin account, in order to add back those applications, by copying them from the external drive back to the Applications folder. After doing that you are finished.
Instruct the new user can create their own Admin account, (more than one can exist) and thereafter deleting the first one you created.
This would achieve a fresh setup akin to the original.

HT1473 I recently had to replace my hard drive and lost my iTunes library. Now I cannot transfer the library from my iPod to iTunes on the new hard drive (same computer). How can I complete the transfer?

I recently had to replace my hard drive and lost my iTunes library. When I try to transfer the content from my iPod to iTunes on the new hard drive (same computer), it would only let me transfer iTunes store purchases. How can I complete the transfer of all the content on the iPod back onto the computer?

Recover media from iPod
See this post for options on moving your iPod data back to your computer.
tt2

Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?

Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?

Hi ancelau,
QuarkXPress 3 is a Classic Mac OS application, so you need a version of OS X that still supports Classic. I believe 10.4 was the last one.
So if you have an iMac that boots with 10.4, then yes that is possible. I doubt though that newer Macs boot with OS X 10.4.
So why don't you upgrade QuarkXPress 3 to a newer version? I am not just asking that because I want you to spend money with us.
Typically using software that was released almost 20 years ago is just feasible when you keep an environment that was current at the time of release or a few years after, so an older Mac with a operating system present at that time. 20 years in IT is a lot.
So my opinion is that on a new Mac with a brand new operating system you need to use something a bit more current.
How about QuarkXPress 9 (released 3 years ago) or QuarkXPress 10? You are better off with v9, as QuarkXPress 10 only opens v7 and higher (whereas QuarkXPress 9 opens v3.1 and higher).
Or - I am even happy to make an exception - upgrade to 9 and we give you 10 for free? Let me know please.
Thanks
Matthias

Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. Could anyone give an amateur from Norway a hint of what may cause the problem? And I can not find the installation-disc for Office...Super! :)

Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. They were all already installed when I bought the computer. Could anyone give an amateur from Norway a hint of what may cause the problem? (And I can not find the installation-disc for the Office Programs...Super!)

Have you contacted Microsoft support - http://www.microsoft.com/mac/support ?

I purchased elements 9 for iMac as a paid download 10/23/2012, recently I had to replace my hard drive and lost the program. I had read that purchased downloads were available for three years but the link with my past order information is no longer click

I purchased elements 9 for iMac as a paid download 10/23/2015, recently I had to replace my computer's hard drive and lost elements. I had read that downloaded purchases would be available for 3 years but, when I click onto the serial number of that order it isn't active. By clicking onto the link it should take me to the site where I can re download the elements 9 but, it doesn't do anything. Unfortunately calling Adobe did not help, they will not address any elements questions over the phone, there's a recording directing all elements questions to this forum. Any suggestions would be greatly appreciated. Thank you. Diana

Try here:
https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html

ITunes saying - The song "XYZ" could not be used because the original file could not be found. Would you like to locate it? I have my songs all located on a 2TB hard drive and it still says it has 150GB on it but can't find them and they are there???

Help!
Opened iTunes to play some music on the computer tonight and its coming up that the songs cannot be located for virtually all of my iTunes library??? I store my iTunes library on a 2TB hard drive and its always worked fine but I ran iBoostup software earlier today and its hasn't worked since then although I have to admit I haven't tried it for a week. It was a free app to clean up files on the apps store.
When I click on the 2TB hard drive under the iTunes link it still comes up 150GB is in the file but it just can't find the songs???
Can anyone help?
Cheers!

The links below illustrate how your iTunes should look if you use default settings in preferences. If you don't use those settings then you have to know what you're doing.
Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/message/13025536 and https://discussions.apple.com/message/17457605
The above links also illustrate the Media folder and its subfolders. Look for a file in there in the logical structure by folder artist and album. If you're lucky, linking one file will get an offer to link others and it iwll all come together again.
I see you are running OSX 10.5.8 it would help to know which version of iTunes you use now and which one you used before.

I downgraded from CC to CS6, and Acrobat XI is now in trial mode. How can I use the Acrobat X that comes with the CS6 Master Collection disc? Should I uninstall Acrobat XI then install Acrobat X? What about de-/reactivation?

I've read about deactivating/reactivating with Photoshop. If applicable, how is that done?
Macbook Pro 16GB Mac OS X 10.9.4

deactivating is done by opening a programs > click help > click deactivate.
that's not applicable to cc apps.
to use acrobat x, uninstall acrobat xi, clean and then install acrobat x, Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

HT5622 Trying to send some ringtone files to my new iphone 4s... thprogram tells me to go to itunes and click on my phone under devices... i can not find the device button anywhere on your home page

Trying to send some ringtones from desk top computer to my iphone 4s.... the instructions tell me to go to itunes...click on devices and find my phone.... where would i find the device button on your home page/

u

I can not find the start icon to restart anywhere and it used to be here.

Start icon used to be in lower left hand corner and also a side bar menu with start option on right side of screen.

The Windows 8.1 start icon is hidden?
If Firefox's toolbar area is not showing, Firefox might be in full screen view. The F11 key switches between regular and full screen view.
If Firefox's toolbar area is visible but the Firefox window is too tall and is blocking the Windows Taskbar, you can try resizing the Firefox window. Press Alt+Spacebar to call up the "control menu" for the Firefox window, then click Size or type s, press the down arrow on the keyboard once, then press the up arrow key repeatedly until you can see the Taskbar, then press Enter.
Does that help?

About 80% of my songs that I purchased from I tunes can not play because a box pops up and says that it can not find the orignal song,whats up with that

most Of my purchased songs inb I tunes can not play because i tunes can not locate the orignal song.What can I do THANK YOU

most Of my purchased songs inb I tunes can not play because i tunes can not locate the orignal song.What can I do THANK YOU

I replaced my hard drive and I backed up my files on an external hard drive but when I reloaded my iweb to my imac none of my files were on it so I can't make changes to my Published web site have I lost my files what can I do

I replaced my hard drive and I backed up my files on an external hard drive but when I reloaded my iweb to my imac none of my files were on it so I can't make changes to my Published web site have I lost my files what can I do

By default iWeb keeps its data in (user)/Library/Application Support/iWeb in a file named Domain. Without this file you cannot proceed (other than by recreating the site from scratch using the published version as a reference) so you need to locate it on the original disk.
To confuse matters, Apple have hidden the user’s Library folder in Lion and Mountain Lion to casual viewers, in an attempt to stop new Mac users messing their machines up. To access it, in the Finder go to the ‘Go’ menu and hold down the Option (Alt) key; the Library folder will appear as a choice.

I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?

I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?
Where do I find this library?
thanks
Shak

Twas quite a hassle if I am honest which was eventually resolved but I don't feel qualified to help anyone through the process as it required a trip to my local apple store and a genius bar appointment.
Personally, I would do anything like moving pictures out of folders etc. Certainly not creating a new users. i don't think that is an elegant solution
Try the following which MAY just about rescue the situation for you but if they don't work you may have to do something more drastic.
(1) Holding down Cmd & Alt at the same time, start iPhoto by clicking on the iPhoto icon. From the resulting menu choose Rebuild photo library by selecting all available options given to you and then pressing REBUILD!
If that doesn't work
(2) Fire up Utilities. Go to migration assistant. Chose 'From another Time machine back-up'. Open the 'Users' option that comes up next and from there select Pictures, then uncheck everything else like Applications etc (you don't want to do a full migration of everything) and click go.
If that doesn't work, take a deep breath and this step is rather complicated but it worked for me. First of all close iPhoto! Then go to new Finder window.
From the Finder window choose Pictures, then iPhoto library, press CMD and the letter i. It brings up a new window. Go to Sharing & permissions. From there select the padlock to unlock settings. and then select User account, then press the 'cog' icon next to +/- abd choose Apply to enclosed items.
This may take a while. Once completed, re-open iPhoto.
And that should (I stress should) cure it.
Good luck.

I replaced my hard drive and lost iPhoto. Is there a way to retrieve? I can not find the starter discs that came with my Macbook Pro.

Similar Messages

Maybe you are looking for