I replaced my old router with a new one, then tried the old one again, now the old one doesn't work.

I've had my old router (i'll call it router 1) for about two years now. I felt like changing it, so I got router 2. When I took the cables from router 1 and put it into router 2, the new router worked instantly. But when I tried switching routers again (I was curious), the router 1 no longer worked. Why is that?
When I plug router 2 back in it works fine but now if I try to use router 1 it doesn't work...

sort of. I had router two on for a couple hours then I turned it off and plugged in router 1. DIdn't work so I switched back to router 2 and then router 2 worked instantly

Similar Messages

  • How do you replace a time capsule with a newer one

    How do you replace a time capsule with a newer one?

    LOL.. pull the old one out.. put the new one in. Setup the new one.. do not copy setting from the old one.. it is better to start over and never copy configuration files.. although you might get away with it.
    Plug the old TC into the new one.. change it to bridge mode.
    You can then access and copy old backups to the new TC if you want. Although IMHO just keep the old TC for 6months. .then wipe it and sell it or use in different role. Do start clean fresh backups on the new TC.
    If that is all useless. ask the specific question and we can try for a specific answer.

  • I had to replace my Iphone 5c with a new one.  Now, my windows 7 pc does not recognize my iphone.  Reinstalled itunes.  Apple mobile device is running.  I did whatever I could find on the internet still no luck.  Any suggestions?  Thnx

    I had to replace my Iphone 5c with a new one.  Now, my windows 7 pc does not recognize my iphone.  Reinstalled itunes.  Apple mobile device is running.  I did whatever I could find on the internet still no luck.  Any suggestions?  Thnx

    You have done everything verbatim included with this link?
    http://support.apple.com/kb/ts1538

  • HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

    Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
    I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
    Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try.  I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
    Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
    Thanks for any help!

    If you have a time machine back up of your current drive you can do this
    Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see  a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
    From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
    Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
    There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

  • Hi how are you i want to replace my iphone 4 with a new one. But i am in Darwin,there is no any apple stores. So where can i send my phone for replacement and how much for that?

    Hi how are you i want to replace my iphone 4 with a new one. But i am in Darwin,there is no any apple stores. So where can i send my phone for replacement and how much for that?

    Warranty and Support are only valid in the country of origin.  You will need to take the device to whatever country it originally came from.
    Apple will not accept shipments from outside the country nor will they return it to an address outside the country.

  • Not very relevant, but how do I replace my old router with a new one?

    Recently I got a new router and I don't really know how to install it. When I first moved into my house, the guys from COX (my local internet service provider) had to come in, plug in the modem and router, go outside to the electrical box, flick some switches in there, and finally got my router working.
    I'm afraid that if I unplug the wires connected to my old router and plug it into my new router, I might reset everything and the COX guys have to come again and all that.
    So how do I replace the router without causing chaos?

    By reading the user manual that came w/your router, contacting the manufacturer and/or visit their customer support/troubleshooting website. 

  • I am replacing my original ipad with a new one given to me by my board if I do a reset and clear on my old ipad will I lose all the notes that show on my new ipad?

    If I reset and erase my old ipad will I lose my old notes that show up on my new ipad?   I don't think so but I am never sure with ipad.

    If you have already transfered everything to your New iPad... then Deleting the Content of the Old iPad is safe to do.
    Old to New  >  http://support.apple.com/kb/HT2109
    Sidney1954 wrote:
    .. reset and erase my old ipad
    See here for that proceedure...
    What to do before selling or giving away your iPhone, iPad, or iPod touch

  • Replacing a running FMX with a new one

    Hi,
    I thought I remembered a post where Frank or Grant discussed what happens when a running fmx is recompiled. I'm just looking for that explanation.
    Here's what's happening to us. We're running EBusiness suite 11.5.10 and the developers just love to compile in new forms during the day, as well as the CUSTOM.pll. Occasionally when one of these forms is compiled and someone is using the old version, the user gets kicked out of the form and then any other user that tries to use that form later gets an FRM-92050. The fix is to stop the forms server, forms metrics and forms load balancing, then recompile the form and CUSTOM.pll, then restart the forms services. Occasionally it even takes dropping everything including the database.
    I was just wondering what caused this with forms so I could enlighten my developers.
    Thanks!
    Mark

    Not sure what happens, but it sounds like you have your MMAP variable set so the fmx can be replaced while Forms is running. This is not recommended in a production environment, since it requires forms to use lots more memory on your system. With the problems you describe, I'll bet the Forms server and the other parts assume it is set to the default value of True or 1.
    If you set the MMAP to False or zero, your developers could no longer screw up the production environment.
    Just search this forum for MMAP. In Forms 6 it is FORMS60_MMAP. In 9 it is FORMS90_MMAP, and in 10g it is just FORMS_MMAP.

  • Replacing Secondary Site server with a new oneA

    I have Secondary site running on Windows 2008 R2, but the server has some issue and i need to install a new secondary server.
    The location is remote and Bandwidth a concern so i do not want all the packages to go over to the new Secondary Site /DP 
    Since the current Secondary site server is still alive , i want to take as much as from it .
    Anyone has some suggestion on how i could accomplish this.

    There's no built in way to do this in 2007; however, you should be able to use the preload package tool:
    http://blogs.technet.com/b/configurationmgr/archive/2009/05/07/configmgr-2007-the-preload-package-tool-preloadpkgonsite-exe-explained.aspx . Using this tool, you can copy the pick files from the existing secondary to the new secondary site server.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Will Apple replace my brand new iPad 2 if the home button doesn't work?

    I recently got a brand new iPad 2 and as soon as I opened up and set it up I realized the home button didn''t work. However, sometimes the home button will start working and within minutes will stop again. I know this isn't normal for a brand new device.
    My iPad is still in warranty, so I'm wondering if I take it to the genius bar will they replace it?

    yes that's what happened to my ipod touch and they replaced it

  • How do I replace my existing HD with a new one

    I have existing drive with my catalogues. I want to use my new 2T WD drive as a replacement for my existing HD which is not working well. Do I clone the original and how do I tell LR 3 to recognize the new drive?  Using Mac Lion.

    By reading the user manual that came w/your router, contacting the manufacturer and/or visit their customer support/troubleshooting website. 

  • How can I replace a *.default profile with a new one?

    I had several problems with a laptop being infected with malware. As a result FireFox would not open and thus I couldn't export the bookmarks before reformating the drive. Before reformatting the drive I copied the FireFox files in user/appdata/mozilla/firefox/ both the Local and Roaming subfolders to another drive. I installed FF 4 after the reformat, replaced the *.default files in the new profile with those I saved from the old installation and got the error message " . . all ready running."

    Delete the '''parent.lock''' file, if it exists in that Profile.

  • Replacing my base computer with a new one

    I use Airport Extreme for Windows.  I have a new computer and want to use it as the base computer.  I can't figure out how to replace the base station.  I am hoping I do not have to uninstall Airport and reinstall on the new machine.  Any ideas?

    rja146 wrote:
    I have a new computer and want to use it as the base computer.
    Please explain what you mean by "base computer".  Once an Apple Wi-Fi base station (or any router, for that matter) is configured, there is no special status for the computer that was used to configure the router.

  • Replace an existing file with a new one

    This is probably a very simple problem. I have a script that is making an XML document. I am sucking information out of a database and exporting it as a XML file. The script runs just dandy except when I want to update the text file I receive an error along the lines of "the file already exists".
    What code do I use to replace an existing file?
    tell application "Finder"
    set theFile to "donky.xml" as string
    set theFullName to mySavePathAsText & theFile
    set theNewFile to make new file at myPath with properties {name:theFile}
    write myFinalText to file theFullName
    set the extension hidden of theNewFile to false
    end tell
    I assume I would use the "replacing yes" command but that is not working or I am not doing it right.
    Any help much appreciated.

    Hello
    Two things.
    • 'open for access file _path with write permission' will create new file at the path given in _path if it's not present.
    • 'set eof' command will clear the existing contents of the given file, which lets you replace the contents.
    So you may try something like this. (Finder is only used to set 'extension hidden' property of the file)
    Good luck
    H
    -- SNIPPET
    set theFileName to "donky.xml"
    set theFullPath to mySavePathAsText & theFileName
    try
    set fref to open for access file theFullPath with write permission
    set eof fref to 0 -- clear the existing contents
    write myFinalText to fref starting at eof
    close access fref
    on error errs number errn
    try
    close access file theFullPath
    on error --
    end try
    error errs number errn
    end try
    tell application "Finder"
    set extension hidden of item theFullPath to false
    end tell
    -- END OF SNIPPET

  • Replacing an existeing theme with a new one

    Hello,
    I have an application built that require some new cosmetics. How can I replace the current theme to a new theme without disturbing it's navigation and functionality?
    This is on Apex 32/Oracle 10gxe
    Thanks,
    R

    Hi,
    You can change your application theme
    http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/themes.htm#sthref1520
    Or you can edit your theme templates
    http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/themes.htm#sthref1547
    Br,Jari

Maybe you are looking for

  • How do I find out app file size

    I only have 1.7gb left on my 8gb phone and notice that an app I am considering is 1.3 gb. How do I find the file size of apps before I buy them so I don't pay for something and then find out that I don't have enough space? Thanks!

  • Red circle with red square inside- what does it mean in iTunes next to songs?

    I can't play songs on iTunes that have a red circle with a small red square inside it. What does the symbol mean and how do I get rid of it. I have one iPad 2, one iPhone 5 and one ip[hone 6 plus bit only one iTunes account and one computer where all

  • DVI / VA Switches and Splitters

    Hello. Can anyone recommend an DVI / AV switch to split a source taken from a PM G5 and a standard AV signal (such as Sky Box / VHS Player etc.). The DVI / AV switch also has to support audio not just on the AV channel but the DVI channel in order to

  • Capturing Print Statements from Oracle SP in Java

    Hi all, Greetings... I have one query...pls find below the info for the same: From my Java application, i am calling Oracle SP using Callable Statement. Here is the simple Oracle SP.. 01. CREATE OR REPLACE PROCEDURE TEST_ORACLE(errcode OUT 02. NUMBER

  • Close Tab

    I'm working on a Web Page and was wondering if it is possible to close the current tab in IE, or Firefox, using a Exit button and Action script? Something so the user wouldn't have to go up and click the X in the upper right corner.